Questions & Answers
whats ID and OD of this？
Willys Jeep Parts Tech:
Id 2.075 od 3.005
Id 2.075 od 3.005
Is this the same seal that is used in the T 90 Bearing Retainer 938151
Willys Jeep Parts Tech:
No, this is a hub seal.
No, this is a hub seal.
On a Dana 27, are there inner seals next to the differential in addition to these hub seals?
Willys Jeep Parts Tech:
Seals by your carrier bearings.
Seals by your carrier bearings.
I have a 65 CJ5 with a D27 front axle. The hub seal is stamped Victor 46002. Is this the correct seal?
Willys Jeep Parts Tech:
I dont go by that victor number but yes it should. be. You can tell by your wheel bearings being stamped 'LM' on them.
I dont go by that victor number but yes it should. be. You can tell by your wheel bearings being stamped 'LM' on them.
Is this the seal that will prevent oil or grease from getting on your brake shoes or running down the inside of your wheels?
Willys Tech:
Yes that is correct.
Yes that is correct.
I need a seal but im not sure of the front axle- looks to be an original for the 63 willys truck that its in but Im finding later model jeep brake parts so Im not sure - could you give me the od and id dimensions so I can see if I can match it up? thanks
Willys Jeep Parts Tech:
The best way is to get your wheel bearing numbers. If you can call us toll free. I can take some measurements for you and if you have your wheel bearing numbers i can confirm.
The best way is to get your wheel bearing numbers. If you can call us toll free. I can take some measurements for you and if you have your wheel bearing numbers i can confirm.
I have a 62 Willys PU. Which way does this oil seal face on axle hub, metal lip in or out? Mechanic says there was not any seal at all. Also, is it possible I have a Dana 25 in this year PU?
Willys Jeep Parts Tech:
The metal face should be flush with the hub.
The metal face should be flush with the hub.
I am changing the bearings and seals from my 1967 jeep cj5 four wheel drive. The old inner grease seal has trostle t6626 s stamped on it, what replaces it? the roller bearing cone has Timken 18590 stamped on it what replaces it, if anything? Will look forward to your answer!
Willys Tech:
If you have that stamping then these are not for you. You want 52942 & 52943 bearings. The seal is part number: 805150.
If you have that stamping then these are not for you. You want 52942 & 52943 bearings. The seal is part number: 805150.
I have a 64 truck, is this located between the hub and the drum?
Willys Tech:
Yes that is correct.
Yes that is correct.
Will item #938151 work with 1970 cj5 stock front axle?
Willys Jeep Parts Tech:
The seal is correct for the right application. Please give us a call and we can help you.
The seal is correct for the right application. Please give us a call and we can help you.
Willys Tech:
Yes as long as you are Dana 27 which you should be.
Yes as long as you are Dana 27 which you should be.
YOU MIGHT ALSO BE INTERESTED IN
