FREE SHIPPING ON ONLINE ORDERS OVER $98.00 GOING ON NOW See Details

1-888-648-4923 Mon-Fri, 9AM-5PM EST

Complete Front Disc Brake Conversion Kit
Fits 41-71 Jeep & Willys

Complete Front Disc Brake Conversion Kit
Fits 41-71 Jeep & Willys

Complete Front Disc Brake Conversion Kit

Everything you need to completely redo your entire front brakes from drum to disc. Comes with complete simple to follow install instructions. Get the stopping power you need.

Kit includes:
2 new caliper brackets
2 new dust covers (cadium plated)
2 new rotors
2 rebuilt calipers
2 new wheel bearing hubs
4 new wheel bearings
4 new wheel bearing races
2 new wheel seals
10 new wheel studs
2 new banjo bolts
2 new front brake hoses
2 new brake pads

Helpful Guides and Illustrations:
Install Guide: Front Disc Brake Conversion Kit

Application:
4 wheel drive vehicles

Fits:
41-45 MB
41-45 GPW
46-49 CJ-2A
49-53 CJ-3A
53-64 CJ-3B
55-71 CJ-5
50-52 M38
52-66 M38A1
46-64 Truck
46-64 Station Wagon
66-71 Jeepster Commando

Note: Heavy oversized item $50.00 shipping fee applies to item. It is recommended to use a master cylinder made for disc brakes. See related products below. Some grinding is required on some applications for rim fit and some vehicles will have to use aftermarket rims. Aftermarket rims are recommended.

Item # Price
376895
$799.99

Availability: In stock

Add to Wishlist

Product Videos

Questions & Answers

Sort By: 

  

Questions: WILL THESE FIR MY 1955 WILLY'S?
Question By: ALLEN on Jun 20 2016 3:38 PM
Yes, as long as you have one of the vehicles listed above.
Answer By: Willys Jeep Parts Tech on Jun 20 2016 10:39 AM
Questions: Will this kit fit a 1970 wagoneer? And will it fit 1978 wagoneer they are both full size not grand wagoneer
Question By: Keith on Jun 13 2016 4:36 AM
Sorry, I do not believe so.
Answer By: Willys Jeep Parts Tech on Jun 13 2016 6:01 AM
Questions: I have mitsubishi 4dr5 j24. Is this kit fit for my jeep?
Question By: rukshan on Jun 1 2016 6:42 PM
I have not tried to fit one of these up to that vehicle.
Answer By: Willys Tech on Jun 1 2016 12:19 PM
Questions: Does one need a vaccuum booster for this conversion? Or will it just be standard brakes like my drum brakes are currently. Thanks for your time
Question By: Shayne on Mar 5 2015 12:00 AM
No vacuum booster is needed.
Answer By: Willys Tech on Mar 6 2015 12:00 AM
Questions: Does this work for any dana 27? Will it work with warn hub locks?
Question By: Anonymous on Feb 3 2015 12:00 AM
Yes, this is for a Dana 27 front end. It does not effect the Warn lockouts.
Answer By: Willys Tech on Feb 3 2015 12:00 AM
Questions: Will this kit fit 1952 willys aerowing?
Question By: Jim on Nov 6 2014 12:00 AM
Sorry, these are for 4WD vehicles only.
Answer By: Willys Tech on Nov 6 2014 12:00 AM
Questions: I have a stock 1953 Willys PU with 16 stock wheels, will disc brakes work on this application?
Question By: Vern Guyer on Oct 11 2014 12:00 AM
Yes they will work for the Willys Truck. However you may have to go to an aftermarket rim.
Answer By: Willys Tech on Oct 13 2014 12:00 AM
Questions: I have stock 15 wheels, would upgrading to stock 16 wheels guarantee the disk conversion to fit better? or is it more of a back spacing issue? Thank you for your time
Question By: Anonymous on Oct 1 2014 12:00 AM
You may have to go to an aftermarket rim that has clearance for disc brakes if you have either 15 or 16 brakes.
Answer By: Willys Tech on Oct 1 2014 12:00 AM
Questions: How can you tell the differance from a Dana 44 and 27or 25 front axle
Question By: Terry Brungardt on Sep 17 2014 12:00 AM
They will be stamped. You can also look at the cover gaskets we sell to tell the difference in shape.
Answer By: Willys Tech on Sep 17 2014 12:00 AM
Questions: I have the original 15 rim and there seems to be quite a bit of interference with the calipers. If I go with aftermarket rims, will 16 rims work as well?
Question By: Broken R Ranch on Jun 24 2014 12:00 AM
Any aftermarket rim they make nowadays has clearance for disc brakes typically.
Answer By: Willys Tech on Jun 25 2014 12:00 AM
Questions: will this kit work with a 71 Jeepster commando? V-6 engine.
Question By: Troy on Jun 3 2014 12:00 AM
Yes as long as your are 4WD.
Answer By: Willys Tech on Jun 3 2014 12:00 AM
Questions: How do you account for 15 stock wheels (welded) rubbing caliper? So much so it will not engage lugs. Are spacers required?
Question By: abbynormal on May 3 2014 12:00 AM
On some original style rims you may have to go to aftermarket rims for clearance.
Answer By: Willys Tech on May 5 2014 12:00 AM
Questions: Will this kit work with a 1967 jeep cj5 3.7 225 dauntless engine? what is the cost of all parts needed to do the complete conversion?
Question By: rick on Apr 17 2014 12:00 AM
Yes this will work for a 1967 CJ-5. It fits all the vehicles listed above. I would also recomment getting part number: 376896 for that vehicle.
Answer By: Willys Tech on Apr 17 2014 12:00 AM
Questions: Is the wheel lug pattern the same between the disk conversion in the front vs. the drums in the back?
Question By: Anonymous on Mar 21 2014 12:00 AM
They are the same 5 x 5.5
Answer By: Willys Tech on Mar 24 2014 12:00 AM
Questions: Hello, I was wondering if this kit would fit on a 1955 Willys pickup 4WD? I also have no idea on how to check what axle it has so if you know that would be helpful. Thanks.
Question By: Martin on Aug 6 2013 12:00 AM
Yes this is the proper kit. You have a Dana 25 front end.
Answer By: Willys Tech on Aug 6 2013 12:00 AM
Questions: My CJ-2A Disk Brake conversion came the other day. Looks great! I have the shop manual and on page 188 Fig 217 as shown, I have removed the Axle Shaft Flange. What is the next step to get the front drums removed? Thanks, Peer.
Question By: Peer Plaut on Jul 31 2013 12:00 AM
You will need part number: A692 socket to remove both sets of spindle nuts. Once those are off everything will just slide off.
Answer By: Willys Tech on Aug 1 2013 12:00 AM
Questions: I have a 57 FC170 will kit work for me?
Question By: Tray on Jun 6 2013 12:00 AM
Yes it will work just fine. They will work for the Willys FC's as well.
Answer By: Willys Tech on Jun 7 2013 12:00 AM
Questions: My 1964 CJ5 has the stock 9 drums. With this kit, is it necessary to upgrade the rear brakes too, or will it work OK with just the front disc conversion? Thanks.
Question By: Anonymous on Dec 18 2012 12:00 AM
You can do just the front if you like. We also have rear kits too if you want to upgrade that. It is entirely up to you.
Answer By: Willys Tech on Dec 19 2012 12:00 AM
Questions: Do you have a front and rear drum to disk conversion kit(s) for a 1970 CJ6?
Question By: Josh on Jul 20 2012 12:00 AM
Yes you will have a Dana 27 front end. It will work.
Answer By: Willys Tech on Jul 20 2012 12:00 AM
Questions: Also---should I order new break lines as well?
Question By: Anonymous on Jul 1 2012 12:00 AM
I would make new lines. We have all the flex lines available.
Answer By: Willys Tech on Jul 2 2012 12:00 AM
Questions: I have a 56 6-226 4wd Pkup. I want to do BOTH front and rear disc conversions. Do you have a rear conversion kit yet? If so: If I install a rear disc kit as well, what is the new emergency brake apparatus?
Question By: Anonymous on Jul 1 2012 12:00 AM
Yes we have the rear kits too. Please call us toll free. I can go over the details.
Answer By: Willys Tech on Jul 2 2012 12:00 AM
Questions: How about including the C-101 applications?
Question By: les on May 27 2012 12:00 AM
Yes, this will work for Jeepster Commandos as well.
Answer By: Willys Tech on May 29 2012 12:00 AM
Questions: Will this conversion kit allow the use of stock 16 wheels on a 1950 CJ3A? and can replacement Master Cylinder be mounted onto frame rail allowing for stock pedal location?
Question By: Steve on Apr 5 2012 12:00 AM
Yes your stock wheels will work fine with this. Yes the master cylinder is designed to work with the stock pedal.
Answer By: Willys Tech on Apr 6 2012 12:00 AM
Questions: do you sell a rear disc conversion kit? for 1953cj3b
Question By: Anonymous on Sep 10 2011 12:00 AM
This is for front only. We can get you fixed up with all new parts for your rear drums.
Answer By: Willys Tech on Sep 12 2011 12:00 AM
Questions: Will this work on 1966 jeep commando(Jeepsteer)?
Question By: Tim on Aug 19 2011 12:00 AM
It should as long as you have a Dana 25 or Dana 27 front end.
Answer By: Willys Tech on Aug 22 2011 12:00 AM
Questions: I have a 1962 Willy's panel truck with a straight axle 2 wheel drive...Will the front disc kit fit or is it just for four wheel drive....I'm looking for something that fits...
Question By: David Dickey on Aug 19 2011 12:00 AM
These are for 4WD vehicles only
Answer By: Willys Tech on Aug 19 2011 12:00 AM
Questions: I see this kit is for 46 year and newer is there a kit for a 42 military mb willy's if so where can I read about it and is it a easy change over?
Question By: Anonymous on Aug 18 2011 12:00 AM
This kit will work for 41-45 MB/GPW as well.
Answer By: Willys Tech on Aug 19 2011 12:00 AM
Questions: Will this fit a DANA model 27 front axle? Do you have and upgrade option for stainless braid brake hoses with the kit?
Question By: Anonymous on Aug 18 2011 12:00 AM
Yes it will work fine for Dana 27. On the lines this is something you would have to match up locally.
Answer By: Willys Tech on Aug 19 2011 12:00 AM
Questions: Disc brake conversion kit for 48-51 jeepster 2 wheel drive??
Question By: jim on Aug 18 2011 12:00 AM
This kit is for 4WD vehicles only.
Answer By: Willys Tech on Aug 19 2011 12:00 AM
Questions: i have the stock steel 15 wheels on a '61 6-226 with Warn hubs that i would like to keep. will spacers be required to clear the rotors/calipers? are aftermarket rims required like in some other kits? will the Warn hubs present a problem with the kit? thanks.
Question By: aj on Aug 18 2011 12:00 AM
You should be all set on this. Occationlly you have to do alittle grinding on the backside of your rim for clearance if you are 15 but really you shouldnt have any problems. This kit is very straight forward and easy to install.
Answer By: Willys Tech on Aug 18 2011 12:00 AM
Questions: What master cylinder are you using ?
Question By: Anonymous on Aug 18 2011 12:00 AM
You want to use a master cylinder specific for disc brakes. We sell a kit try part numbers: 376896 or 376897 depending on your Willys. However we do have customers that use a standard master cylinder with little problem but we recomment the disc one and proportioning valve.
Answer By: Willys Tech on Aug 18 2011 12:00 AM
Questions: Do have better directions for the installation of the kit other than the ones on you website and the ones that come with the kit? Thanks
Question By: Dave on May 24 2016 1:34 PM
See links above. It gives photos and everything of install. If you have any additional questions call us toll free and we can put you in touch with manufacture.
Answer By: Willys Tech on May 24 2016 7:25 AM