Save 15% Off Body. Enter BODY15 Excludes body tubs & tub kits.

FREE SHIPPING on all orders $98+ See Details

Select Your Currency
Close
  • Africa
  • Americas
  • Asia
  • Europe
  • Oceania
Shop Kaiser Willys

Brake & Clutch Pedal Cross Shaft
Fits 48-71 CJ-2A, 3A, 3B, 5, M38, M38A1

Part # A495

New Replacement Brake & Clutch Pedal Cross Shaft (1 required per vehicle)

Direct replacement for your worn out, egg shaped cross shaft. Tube that both the clutch and brake pedal arms attach to.

This cross shaft does not have the cotter pin at the bottom of the shaft by the key way. However, it can still be used on the early models as long as the clutch pedal is clamped onto the tube.

For the later style 645086 style tube and bracket.

Measurements:
7-1/8" long

Fits:
48-49 CJ-2A
49-53 CJ-3A
53-64 CJ-3B
55-71 CJ-5
50-52 M38
52-66 M38A1

Part # Price
A495

$23.49

MSRP:

$23.49

MSRP:

1 Item has been added to your cart!
Close

Product Videos

Questions & Answers

Please Wait...

Ask Question Add Answer

All questions will be displayed after moderation. All answers will be displayed after moderation.

Hi. I have a late frame Cj2a with the later clutch pivot bracket (Item # 645086) other than no cotter pin at the clutch pedal end can you tell me the difference between this cross shaft and the earlier one. Thanks

Willys Jeep Parts Tech:
They are different lengths.

The clutch/brake linkage cross bar for my cj3b has a large threaded nut on the longer side - like an end cap with a smaller hole in center of cap. Maybe held a grease fitting?

Willys Jeep Parts Tech:
Not original. Email mike@kaiserwillys.com some pictures so we can see.

I have two brackets on my shaft. Approx 6 inches apart. One connects to the clutch. The other one connects to clutch pedal arm and has return spring on it. Both are welded to the shaft but I can see cotter pins.

Willys Tech:
Sounds like you are talking about your clutch bellcrank.

I have two brackets on my shaft. Approx 6 inches apart. One connects to the clutch. The other one connects to clutch pedal arm and has return spring on it. Both are welded to the shaft but I can see cotter pins.

Willys Tech:
Sounds like you are talking about your clutch bellcrank.

I've got a 59 CJ5. The clutch pedal and the brake pedal go down through the floor. They both pivot on a shaft at frame. Is there a bushing or sleeve to repair , bad grooves from LACK of LUBE. pilot error I'm sure. It looks to be permanently in place?? Any help would be a good thing. Thanks Dennis

Willys Tech:
There never originally was a bushing or sleeve. This cross shaft will help. We also sell new pedal arms and the tube and bracket that this slides thru too. We can get you fixed up all new.

I've got a 59 CJ5. The clutch pedal and the brake pedal go down through the floor. They both pivot on a shaft at frame. Is there a bushing or sleeve to repair , bad grooves from LACK of LUBE. pilot error I'm sure. It looks to be permanently in place?? Any help would be a good thing. Thanks Dennis

Willys Tech:
There never originally was a bushing or sleeve. This cross shaft will help. We also sell new pedal arms and the tube and bracket that this slides thru too. We can get you fixed up all new.

Do you have the Key for this and the cluctch arm?

Willys Tech:
5036A is the part number for the woodruff key

Do you have the Key for this and the cluctch arm?

Willys Tech:
5036A is the part number for the woodruff key

Having trouble getting the brake pedal off, removed the plate from the master cylindar, pedal will not slide off. Any tricks or anything I'm missing?

Willys Tech:
Once you slide off the cross shaft the pedal should come off.

Having trouble getting the brake pedal off, removed the plate from the master cylindar, pedal will not slide off. Any tricks or anything I'm missing?

Willys Tech:
Once you slide off the cross shaft the pedal should come off.

I have a Cj2a 1946 Jeep Willys. When I hit the break there is a lot of play from left to right what do I need to fix that?

Willys Tech:
This cross shaft as well as a new brake pedal arm will do the trick.

I have a Cj2a 1946 Jeep Willys. When I hit the break there is a lot of play from left to right what do I need to fix that?

Willys Tech:
This cross shaft as well as a new brake pedal arm will do the trick.

Will this fit a 1971 V6 CJ5, or is it a different part?

Willys Tech:
The V6-225 engine used a different one. We can only get those good used.

Will this fit a 1971 V6 CJ5, or is it a different part?

Brian:
Actually, I took a gamble and purchased this one for my 225 V6 and it's a direct replacement.
Willys Tech:
The V6-225 engine used a different one. We can only get those good used.

Will this part work for the Pickup or is there another part for it?

Willys Tech:
For the Willys Truck it is different. That is availble good used. Please call us toll free.

Will this part work for the Pickup or is there another part for it?

Willys Tech:
For the Willys Truck it is different. The correct part number is 642924. Thanks

does this piece have the keyway cut for clutch arm mount

Willys Tech:
Yes that is correct. It has the cut out.

Does this piece have the keyway cut for clutch arm mount.

Willys Tech:
Yes that is correct. It has the cut out.

When replacing this cross shaft are there extra parts I should ordering to replace with it? (Washers, pins, ect...) My 48 cj2a serial #218265

Willys Tech:
Some extra items are: 645086, A405, 800527
Request Catalog
X
THANK YOU! Your catalog request has been submitted successfully. Please note:

If your catalog does not arrive within 7-10 business days, call us Toll-Free at (888) 648-4923.

Email Subscription
X
THANK YOU! You have successfully subscribed to our newsletter.
Contact Form
X
THANK YOU! Your contact form request has been submitted successfully.
Photo Contest
X
SUCCESS! Your photo contest entry has been submitted!
Browser warning
The browser you are using to visit our website is no longer supported. For the best browsing experience, please visit us using a different browser.
I understand, close this message