New Distributor Shaft Bronze Bushing (2 required)
Fits 41-71 Jeep & Willys with 4-134 engine
New Distributor Shaft Bronze Bushing (2 required per vehicle)
Application:
4-134 engine (6, 12 or 24 volts)
These bushings go in the housing where the shaft runs thru. One at the top and one at the bottom.
Speciatly original broze bushing used to stabilize the shaft on your distributor. This is usually the first thing to wear from the factory.
Fits:
41-45 MB
41-45 GPW
46-49 CJ-2A
49-53 CJ-3A
53-64 CJ-3B
55-71 CJ-5
50-52 M38
52-66 M38A1
46-53 Truck
46-53 Station Wagon
48-51 Jeepster
Part # | Price |
---|---|
A1681 | $8.99 MSRP: |
$8.99
MSRP:
Questions & Answers
Do you have a replacement bushing for the distributor for an L 226 engine - Willys 1962 truck? Thanks and regards, Dave
Sorry, I do not have a good listing currently for that.
It will fit in the M38 and M38A1 military 24V distributor? Thanks
Yes, that is correct.
do i have to drill the holes for the oil flow (wicks) by myself ?
No you wouldnt drill a hole in these.
Will this bushing fit my Autolite IAY 4401?
Yes, as long as it's going in a 4 cylinder engine. Thanks
Hi , I have 6-226 with Delco Remy distributor 1110249 .Does this bushing work for that too? Thanks
No, this is for the 4 cylinder engines only. Thanks
YOU MIGHT ALSO BE INTERESTED IN
"Willys" Frame Data Plate (rectangular style)
Fits 41-71 MB, CJ-3A, 3B, 5, 6
Part # DATAPLATE-15
$14.99
MSRP:
All Aluminum Radiator Assembly
Fits 54-64 Truck, Station Wagon with 6-226 engine
Part # 927948-ALUMINUM
$399.99
MSRP:
Autolite Starter Data Plate (6 or 12volt)
Fits 41-71 Willys & Jeep Vehicles
Part # B2436
$12.99
MSRP:
Autolite Voltage Regulator Data Plate (12volt)
Fits 41-71 Willys & Jeep Vehicles
Part # B2438-12
$12.99
MSRP:
Backing Plate to Steering Knuckle Hardware Kit
Fits 46-55 Jeepster, Station Wagon with 10" brakes
Part # G64335
$17.99
MSRP:
Backing Plate to Steering Knuckle Hardware Kit
Fits 46-64 Truck, Station Wagon with 11" brakes
Part # G64336
$17.99
MSRP:
Blackout Drive Lamp Bracket (Mounts to Drivers Side Fender)
Fits 41-66 MB, GPW, M38, M38A1
Part # A4118
$59.99
MSRP:
Bracket & Spring Guide for Emergency Brake Hande
Fits 41-61 MB, GPW, CJ-2A, 3A, 3B, M38, Truck, Station Wagon, Jeepster
Part # B1226
$34.99
MSRP:
Brake & Clutch Pedal Return Spring
Fits 41-71 MB, GPW, CJ-2A, 3A, 3B, 5, M38, M38A1
Part # 630593
$4.99
MSRP:
Brake & Clutch Pedal Return Spring
Fits 46-64 Truck, Station Wagon, Jeepster
Part # 630593A
$4.99
MSRP:
Brake Shoe Set 10" (per axle)
Fits 46-55 Jeepster, Station Wagon with Planar Suspension
Part # 804981
$49.99
MSRP:
Camshaft Thrust Plate to Block Hardware Kit
Fits 46-71 Jeep & Willys with 4-134 engine
Part # 802576K
$0.99
MSRP:
Canvas Storage Bag for Aft Side of Front Seat Frames
Fits : 41-71 Jeep & Willys
Part # B2399
$144.99
MSRP:
Carburetor Metering Rod Gauge (WO)
Fits 41-53 MB, GPW, CJ-2A, 3A, Truck, Station Wagon
Part # 10926
$19.99
MSRP:
Chrome Clamp on Door Mirror Kit with 5" Round Mirror
Fits 46-64 Willys Truck, Station Wagon
Part # 953380
$32.99
MSRP:
Clutch & Brake Pedal Draft Seal Kit
Fits 46-64 Truck, Station Wagon, Jeepster
Part # 802743
$15.99
MSRP:
Clutch & Brake Pedal Rubber Pad (2 required per vehicle)
Fits 46-64 Truck, Station Wagon, Jeepster
Part # 646502
$16.99
MSRP:
Clutch Cover & Pressure Plate Assembly 8-1/2"
Fits 41-71 Jeep & Willys with 4-134 & 6-161 engine
Part # 906467
$93.99
MSRP:
Clutch Cover & Pressure Plate Assembly 9-1/4"
Fits 60-71 CJ-5, M38A1 (4-134 F engine)
Part # 944741
$169.99
MSRP:
Clutch Friction Disc 10"
Fits 54-64 Truck, Station Wagon with 6-226 engine
Part # 746240
$99.99
MSRP:
Clutch Friction Disc 8-1/2"
Fits 41-71 Jeep & Willys with 4-134 & 6-161 engine
Part # 930731
$69.99
MSRP:
Clutch Pedal to Pedal Pad Shank Hardware Kit
Fits 41-71 MB, GPW, CJ-2A, 3A, 3B, 5, M38, M38A1
Part # 6157
$0.99
MSRP:
Clutch Pressure Plate to Flywheel Hardware Kit
Fits 54-64 Truck, Station Wagon with 6-226 engines
Part # G63589
$3.99
MSRP:
Clutch Release Bearing Sleeve
Fits 41-71 Jeep & Willys with 4-134 & 6-161 engines
Part # 644366
$12.49
MSRP: