Questions & Answers
Questions: I need the rear shackles. Can you provide good used ones for a 1955 6-226 truck?
Question By: CRC on Jun 4 2014 12:00 AM
646729 is the part number for the rear truck shackles.
Answer By: Willys Tech on Jun 5 2014 12:00 AM
Questions: Have a 54 pickup with a Timken rear and a Dana 25 front, should I replace the Timken with a Dana 53 (same ratio) as it appears the service parts are not available for the Timken. Will it be a complete rearend or will brake components interchange. The truck has 42,000 orig miles, opinion?
Question By: Joe on May 26 2014 12:00 AM
We have alot of the Timken rear end parts availble. You could swap though if you really wanted to.
Answer By: Willys Tech on May 27 2014 12:00 AM
Questions: The overhaul kit mentions kit covers everything for both the front and rear of vehicle, but does not say it includes the shock mounts for the front and rear. Are these included, but just not mentioned, or do I still have to but them separately?
Question By: Tim on Apr 17 2014 12:00 AM
The complete kit has everything in the photo shown and listed. The mount plates are separate. We do carry them but they are not a major wear item.
Answer By: Willys Tech on Apr 17 2014 12:00 AM
Questions: Could you use less leaf springs for a softer ride?
Question By: David on Apr 15 2014 12:00 AM
Im sure you could but I wouldnt recommend it.
Answer By: Willys Tech on Apr 15 2014 12:00 AM
Questions: I have a 1962 panel wagon with a straight axle in the front-will this kit fit this truck?
Question By: Mark Oplinger on Mar 17 2014 12:00 AM
SUSPENSION-10 is for the Willys Station Wagons.
Answer By: Willys Tech on Mar 17 2014 12:00 AM
Questions: I would also like to use wagon springs to get a bettter ride on my 62 pickup but you say they are not compatable. The springs are the same length what would be different?
Question By: Eddie on Oct 17 2013 12:00 AM
They are different dimensions altogether. The Willys Station Wagon springs really will not work on a Willys Truck in the rear. The fronts are the same however.
Answer By: Willys Tech on Oct 18 2013 12:00 AM
Questions: Is this kit a soft ride kit like the 2 lift I do not want to lift it but need the hole kit.TRUCK IS 57 P/U Thanks JB
Question By: JB on Jul 8 2012 12:00 AM
You will typically get 1 to 1.5 lift off what you are currently sitting at because your springs have lost there arch. This sets you back up to stock height and ride.
Answer By: Willys Tech on Jul 9 2012 12:00 AM
Questions: why is the price so much different between the suspension kit for a truck verses the wagon
Question By: gary rathjen on Apr 25 2016 9:15 PM
They are different parts on some of the components and very different kits in the rear.
Answer By: Willys Tech on Apr 27 2016 9:04 AM