Questions & Answers
is this the short front fenders?
Willys Jeep Parts Tech:
These are the correct size fenders for the CJ5 upt to 71. I would assume thats what you mean by short, as they get longer after the early 70s.
These are the correct size fenders for the CJ5 upt to 71. I would assume thats what you mean by short, as they get longer after the early 70s.
I have a 1959 CJ5 looking for the 2 fenders , Fire wall to the Grill mount is 33" and Firewall to the end of the front fender is 36" , is that what this is?
Willys Jeep Parts Tech:
These fenders are the exact same size as the original. Assuming you have a 1959 Cj 5 - these would be the proper fenders for you.
These fenders are the exact same size as the original. Assuming you have a 1959 Cj 5 - these would be the proper fenders for you.
How much does the fender weigh with its packaging?
Willys Jeep Parts Tech:
Dimensions 48 × 19 × 17" Weight 30 pds approx.
Dimensions 48 × 19 × 17" Weight 30 pds approx.
What are the modifications required to use this fender on a 1965 CJ-5? Any photos of installed product for comparison to original sheet metal?
Willys Jeep Parts Tech:
Ive put these on my CJ-5. They bolt up at the body and grill great. You may just need to cut a bit out over the upper shock mount there at the frame for clearance. Thanks!
Ive put these on my CJ-5. They bolt up at the body and grill great. You may just need to cut a bit out over the upper shock mount there at the frame for clearance. Thanks!
Will this fender fit a 1971 Jeep commando
Willys Jeep Parts Tech:
Sorry, I do believe they are different.
Sorry, I do believe they are different.
I noticed you have a fender item 984705 for a M38A1, would you happen to have just repair panels available just a bit of the front of the fender from about where the fender mount light is to the front, just need a patch or if you have any fenders that might have been damaged in shipping? Thanks you
Willys Jeep Parts Tech:
688234-A and 688233-A are overlay panels. But other than that you can only get the complete fender.
688234-A and 688233-A are overlay panels. But other than that you can only get the complete fender.
What the difference between marked and un marked fenders?
Willys Jeep Parts Tech:
It is the side marker reflector. Early style fenders did not have them. However both fenders will bolt up the same.
It is the side marker reflector. Early style fenders did not have them. However both fenders will bolt up the same.
will these fenders fit my 1958 cj-5
Willys Jeep Parts Tech:
Yes, it is in the Fits range listed and proper.
Yes, it is in the Fits range listed and proper.
What are the side marker indentations?
Willys Tech:
Those are the cut out / hole for the side marker lens and bulb in the fender.
Those are the cut out / hole for the side marker lens and bulb in the fender.
are these fenders the same gauge as the original productions ???
Willys Tech:
Yes that is correct.
Yes that is correct.
Do these also have the inner brace?
Luke:
These do not have the inner brace
These do not have the inner brace
Willys Tech:
Yes these are complete fenders inner and outer.
Yes these are complete fenders inner and outer.
How thick (gauge) are these fenders?
Willys Tech:
16 Gauge
16 Gauge
YOU MIGHT ALSO BE INTERESTED IN
