Product Videos
Questions & Answers
Are the lifter bases 1.28 and how much for each one
Willys Jeep Parts Tech:
Your caliper might be a hair off. I measure right at 1.38. These are NOS originals. These are sold each. Thanks!
Your caliper might be a hair off. I measure right at 1.38. These are NOS originals. These are sold each. Thanks!
i need 12 mushroom lifters barrel is .622 the lifter its self no adjuster is 2.440 long also will need adjuster also thanks charlie
Willys Jeep Parts Tech:
Email mike@kaiserwillys.com to try to ID what engine you have and help.
Email mike@kaiserwillys.com to try to ID what engine you have and help.
Can you buy just the top cap piece for the tappet ? Where the valve rides ?
Willys Jeep Parts Tech:
640020 is the part number.
640020 is the part number.
What is the base diameter on these lifters?
Willys Jeep Parts Tech:
.625" like original.
.625" like original.
Can you tell me what the diameter of the shaft is on these and the diameter of the bottom. Thanks Tom
Willys Jeep Parts Tech:
The diameter of the shaft comes out to 2-5/8 long and the diameter of the bottom comes out to 1-1/4" wide. Thanks
The diameter of the shaft comes out to 2-5/8 long and the diameter of the bottom comes out to 1-1/4" wide. Thanks
If I order ( Qty 8 ) for one vehicle ?
Willys Tech:
Yes qty 8 will do the whole vehicle.
Yes qty 8 will do the whole vehicle.
are 4 long and 4 short? or all the same?
Willys Tech:
On the 4-134 L head the intake and exhaust tappets (lifters) were all the same.
On the 4-134 L head the intake and exhaust tappets (lifters) were all the same.
YOU MIGHT ALSO BE INTERESTED IN
