Product Videos
Questions & Answers
I recently just replaced all my tie rod ends on my m38a1 , think that was the reason why my drive side wheel has a negative camper after replacing it still dose . Could it be the u joint in the steering knuckle then ?
Willys Jeep Parts Tech:
I would also check your king pin bearing and wheel bearings as well.
I would also check your king pin bearing and wheel bearings as well.
Does this come with hardware? I'm specifically interested in the size of the 6 bolts that hold on the spindle.
Willys Jeep Parts Tech:
That is a separate item. This is just the knuckle.
That is a separate item. This is just the knuckle.
Do you have the passenger steering knuckle support for a '68 CJ5?
Willys Jeep Parts Tech:
These fit thru 1971 CJ-5
These fit thru 1971 CJ-5
Do you have a gasket that goes between the knuckle and spindle?
Willys Tech:
That we typically just use some sealant.
That we typically just use some sealant.
I have a cj3b I think. That is what it is titled as. But my front axle has bolt on steering knockle arms. Could I change over to this type of knuckle? Just wondering. And does that mean my front axle is from an earlier year and if so how early?
Willys Tech:
Please call us toll free. I can probably help you ID it no problem.
Please call us toll free. I can probably help you ID it no problem.
YOU MIGHT ALSO BE INTERESTED IN
