Questions & Answers
Questions: Is this kit USA made?
Question By: Yohanier fermandez on Jun 18 2018 4:20 AM
It is made by Webber. I will check on this.
Answer By: Willys Jeep Parts Tech on Jun 18 2018 9:11 AM
Questions: Since further down on the page it has a "note" about fitment on other jeeps, specifically a CJ3A with the L-134 in my case. I'm guessing this will fit my jeep, even though it doesn't list it in the "fits" section?
Question By: Rhody on Apr 16 2018 1:19 AM
That's correct. This can fit the L-head model Jeeps but with some modification. Thanks
Answer By: Willys Jeep Parts Tech on Apr 16 2018 5:31 AM
Questions: I have the CJ 3B w/ 134- F head. My concern is fit and hood clearance. Will this poke through the hood? Is there a low profile airfilter for this?
Question By: George on Mar 17 2018 2:02 AM
This will not have any clearance issues on the CJ-3B.
Answer By: Willys Jeep Parts Tech on Mar 20 2018 6:09 AM
Questions: It is not attaching properly to the engine on my cj3b. Do I need a different base adapter?
Question By: Shane Detwiler on Nov 13 2017 1:03 AM
Please call us toll free. Ask for Mike M. and i can help you out.
Answer By: Willys Jeep Parts Tech on Nov 13 2017 5:53 AM
Questions: Would this be a good replacement for an original cj2a solex carb. Is there any modifications needed for the intake? Pedal linkage? Choke and throttle cables?
Question By: Sean Page on Apr 7 2017 4:31 PM
They never used a solex originally. They used a Carter Wo carb. 923806 is a good replacement carb.
Answer By: Willys Jeep Parts Tech on Apr 10 2017 5:45 AM
Questions: Using this carb and the conversion kit will this replace carb (your part # 923808 on a stock 57 CJ5 F-head) as an improvement in performance?
Question By: Sean on Dec 7 2016 5:42 PM
Yes, this is for the 4-134 F engine and a performance increase per item description above.
Answer By: Willys Jeep Parts Tech on Dec 7 2016 10:22 AM
Questions: I have a 49 cj2a with the hurricane 134 out of a 3B. Judging by the details I would not have to modify anything on the intake? Also does this conversion allow more clearance for the hood versus the carter? was trying to lower the profile of the carb.
Question By: Keith O Reynolds on Aug 8 2016 10:21 AM
This will be a bit lower clearance but we have not tried it in a CJ-2A with a unoriginal engine.
Answer By: Willys Jeep Parts Tech on Aug 8 2016 5:40 AM
Questions: I have a 53 cb3b what type of air filter do you run on this carb
Question By: Ivan Okuma on May 22 2016 4:45 AM
You would have to reuse your original oil bath air cleaner.
Answer By: Willys Tech on May 23 2016 5:40 AM