Product Videos
Questions & Answers
Sort By:
Questions: what is the correct replacement low pressure radiator cap for this radiator? Are there 2 options available like with the oriiginal radiator?
Question By: Vince on Apr 9 2022 6:00 PM
810391 or 810395
Answer By: Willys Jeep Parts Tech on Apr 11 2022 7:11 AM
Questions: I've done a engine swap in my 46 CJ2A, Will this radiator work to cool a Chevy 350 with an electric fan?
Question By: Shane Clarke on Feb 27 2019 3:19 AM
Yes, it should be more than adequate.
Answer By: Willys Jeep Parts Tech on Feb 27 2019 5:33 AM
Questions: what is the size of this radiator? I have one that looks like this in MB. with the tabs on the bottom. I have a shroud on the old one but you say I dont need one?
I would like the dimensions to make sure this is the same as mine. Thanks
Question By: Terry Martin on Mar 6 2018 10:57 PM
CORE: 13.75 x 19.75 WIDE
OVERALL 18-7/8 H x 19-7/8 W
No shroud is necessary. They provide plenty of cooling
Answer By: Willys Jeep Parts Tech on Mar 7 2018 11:08 AM
Questions: Does the placement of the petcock get in the way of the travel of the differential housing?
Question By: Herbert Tate on Nov 24 2017 7:41 PM
No, it will not.
Answer By: Willys Jeep Parts Tech on Nov 27 2017 5:43 AM
Questions: How do I attach shroud?
Question By: Jim murphy on May 28 2017 11:23 PM
These do not require a shroud.
Answer By: Willys Jeep Parts Tech on May 30 2017 5:29 AM
Questions: Do you have a radiator that would fit m-38 with 225 v-6 jeep motor. The m-38 radiator would be good if the lower hose fitting was on the passenger side instead of the drivers side. Are you able to custom build one? THANKS
Question By: bob picard on Jul 7 2016 5:16 PM
You may have enough room to use a universal flexible hose to make work. These are a thinner radiator than the original (while still providing more than adequate cooling for a V8 engine).
Answer By: Willys Jeep Parts Tech on Jul 7 2016 12:01 PM
Questions: Do you recommend hounding this aluminum radiator to frame? If so what size wire is required
Question By: Anonymous on Oct 31 2014 12:00 AM
They are originally mounded to the crossmember on the two tabs. This mounds the same. Then you use your original top support rod as well.
Answer By: Willys Tech on Nov 3 2014 12:00 AM
Questions: The previous owner of my '42 GPW swapped in an unknown year Kaiser Supersonic 4L134 motor. Would this radiator work for that motor?
Question By: Scott on Sep 1 2014 12:00 AM
Yes, it should work just fine. The mounting to your crossmember is the main think and I doubt thats been changed.
Answer By: Willys Tech on Sep 2 2014 12:00 AM
Questions: Is this an in stock item or does it have a delay in shipping from the manufacturer?
Question By: Ben on Jul 2 2014 12:00 AM
We stock these.
Answer By: Willys Tech on Jul 2 2014 12:00 AM
Questions: Will it work with the L134 factory fan or does it require electric? Is the cap included? Thanks
Question By: Ben on Jul 1 2014 12:00 AM
Yes the stock water pump fan will work just fine. It comes with a cap as well.
Answer By: Willys Tech on Jul 1 2014 12:00 AM
Questions: Do you carry a shroud or how would recommend installing this with a stock engine setup? Thank you. 1946 Cj2a 60054
Question By: Ben on Jul 1 2014 12:00 AM
This does not require a shroud for cooling.
Answer By: Willys Tech on Jul 1 2014 12:00 AM
Questions: My 1954?cj3b runs hot no matter what I do. Is changing the radiator a reasonable solution? Engine was rebuilt as part of a complete off frame restore.i even run the heater to help with cooling but on a recent 75 degree day the temp got up to 220 with a speed not exceeding. 30mph . I live in the mountains so roads are up and down.
Question By: Anonymous on May 13 2014 12:00 AM
If your radiator is over 60 years old its probabaly not going to cool properly for sure. It will probabaly do the trick and get your temp down.
Answer By: Willys Tech on May 14 2014 12:00 AM
You Might Also Be Interested In
Weekly Willys highlights and discounts sent to your inbox
