Product Videos
Questions & Answers
Sort By:
Questions: Hi, how far back on my CJ-5 will this go, does it reach the back of the vehicle?
Thanks, Tim
Question By: Tim on Feb 13 2022 6:40 PM
It will hang down over your roll bar and then the straps will secure it.
Answer By: Willys Jeep Parts Tech on Feb 14 2022 7:30 AM
Questions: I have a 46, want put a bikini top on it, I think the windshield is a later one, (it has the 'flap' in the center but no handle like my 52), will your top work on this??
Question By: Dick Campbell on May 12 2021 2:38 PM
Yes, but on a 46 it will be a bit baggy but could be hemmed up.
Answer By: Willys Jeep Parts Tech on May 12 2021 9:53 AM
Questions: I have a 1952 Willys Jeep. How wide is this bikini top?
Question By: Wayland on Mar 22 2021 1:31 AM
This is more for a CJ-5. It will be baggy on the sides a few inches. Some people are ok with it and some have it hemmed up a bit.
Answer By: Willys Jeep Parts Tech on Mar 22 2021 5:43 AM
Questions: Hi.
What are the Dimensions of the Top.
Question By: Daniel on Feb 16 2021 2:46 PM
Not sure exactly what kind of measurements your looking for. Email mike@kaiserwillys.com to help.
Answer By: Willys Jeep Parts Tech on Feb 16 2021 7:28 AM
Questions: I have a 1952 CJ3A. will this bikini top fit?
Question By: Steve Stich on Jun 24 2020 12:43 AM
It will be a bit baggy on the sides on the CJ-3A. But some people are ok with it and some just hem it up.
Answer By: Willys Jeep Parts Tech on Jun 24 2020 5:35 AM
Questions: I have a 1960 Willy’s CJ5. No roll-bar or top on it. For this bikini top, which windshield channel do I need to buy? And what hardware do I need for behind the seats if there is no roll-bar to lay the bikini top over? Thanks.
Question By: Ron Locklin on May 23 2020 11:37 AM
Your windshield should already have a channel in it from the factory. Please email mike@kaiserwillys.com some pictures so we can see what all you have going on. Thanks!
Answer By: Willys Jeep Parts Tech on May 26 2020 5:39 AM
Questions: Hi can I make this fit a Mitsubishi J53 (CJ-3B) by adding a windshield channel?
Question By: Andre Steyn on Dec 7 2019 3:01 AM
It would fit but on a CJ-3B be a bit baggy so I would have it hemmed up a bit.
Answer By: Willys Jeep Parts Tech on Dec 9 2019 5:26 AM
No, the fasteners are in different places. The dimensions are right tho.
Answer By: Chris on Dec 11 2021 7:03 PM
Questions: My '63 cj5 has an arched channel that I believe to be original , as i have seen it on others. Will this work with top that channel or will I need something different?
Question By: Ken knecht on Jan 11 2019 2:29 PM
Yes, that is original and it is made for it. Thanks!
Answer By: Willys Jeep Parts Tech on Jan 11 2019 6:34 AM
Questions: Will this fit 1952 cj3a? Does it also come in Olive Drab?
Question By: Ron Chassie on Oct 2 2018 1:29 AM
No, I'm sorry but this style bikini top only comes in black. It will work for the 3A. However, it is not made for the 3A which means that you will have to modify it just a bit.
The top is made for the CJ-5 so installing it on the 3A will leave you with extra material on the sides that you'll have to pin up. That's really it. Thanks
Answer By: Willys Jeep Parts Tech on Oct 2 2018 8:44 AM
Questions: FIT for CJ-2A - does this fit in existing channel on top of windshield frame?
Question By: JOHN on Aug 29 2018 9:15 PM
You would have to put a channel on top the windshield frame for it to slide into. The CJ-2A originally used 10 studs across the top.
Answer By: Willys Jeep Parts Tech on Aug 30 2018 5:37 AM
Questions: Will this fit a 1961 CJ3B?
Question By: chris on Jul 2 2018 11:12 PM
These fit a CJ-5. It can work for a CJ-3B but will need to be hemmed.
Answer By: Willys Jeep Parts Tech on Jul 3 2018 5:48 AM
Questions: I have a 64 CJ-5 with a after market roll bar. What do I need to install Channels? If so what is the product number?
Thanks
Brett
Question By: brett on May 4 2018 10:22 PM
Yes, we have a channel that goes into the top part of the windshield frame. Give us a call toll free and we can order one up for you. 888.648.4923
--Thanks
Answer By: Willys Jeep Parts Tech on May 7 2018 4:46 AM
Questions: will it fit a 52 cj3a with a roll bar
Question By: Gary Harley on Dec 31 2017 1:24 AM
It will work for the 3A however, it's originally made for the CJ-5 which is wider than the 3A. Basically, it will have extra material on the sides which you would need to pin or clamp up. As long as you're okay with this extra material, it will work just fine for you. Thanks
Answer By: Willys Jeep Parts Tech on Dec 31 2017 8:22 AM
Questions: If I buy item #51595, will this bikini top fit over the same bow assembly?
Question By: Carl on Nov 30 2017 11:57 PM
No, not typically. They are not designed together.
Answer By: Willys Jeep Parts Tech on Dec 4 2017 10:55 AM
Questions: do you have the top in tan
Question By: henry on May 8 2017 12:15 PM
I'm sorry but as of right now the tan is on manufacturer back order. Give us a call toll free in a couple of weeks for an update. Thanks!
Answer By: Willys Jeep Parts Tech on May 8 2017 5:27 AM
Questions: Does this top include the windshield channel?
Question By: Anonymous on Sep 11 2014 12:00 AM
The channel is a separate item. We do carry it. Please call us toll free.
Answer By: Willys Tech on Sep 12 2014 12:00 AM
Questions: I have a 52 m38 flat fender, will this work with my jeep and is there anything else I would need to install it?
Question By: Nick on Aug 9 2014 12:00 AM
This is for CJ-5 and M38A1. It will work but for the earlier jeeps but it will be baggy over the sides and a bit long for the M38. Its can be hemmed Im sure to fit.
Answer By: Willys Tech on Aug 11 2014 12:00 AM
Questions: I have a 1960 CJ3B, will this fit?
Question By: Ron on May 9 2016 12:37 AM
This really is for the vehicles listed above only. It could be modified to fit the CJ-3B though. It will just be a bit baggy on the sides.
Answer By: Willys Tech on May 9 2016 5:51 AM
Weekly Willys highlights and discounts sent to your inbox
