Product Videos
Questions & Answers
Sort By:
Questions: What is the shaft size and the spline count? Do you have a similar/smaller 15" wheel that would fit. I have power steering on V6 and don't need a 17" wheel
Question By: Scott Boulton on May 29 2019 7:49 PM
These take an oddball 13/16" nut - the problem is no other steering wheel is made that will fit right one with the spline count.
Answer By: Willys Jeep Parts Tech on May 29 2019 12:51 PM
Questions: Mike,
Thanks for your great service.
Bought this replacement wheel from you but having a difficult time getting original wheel off, seems to be stuck on the splines. Using a hammer from the back side only breaks up the old steering wheel. Any suggestions?
Dusty '64 CJ6
Question By: Matt on Nov 30 2018 7:50 PM
I know it can be difficult but once you take the nut off there is really nothing else holding it on. The best thing to use is our wheel puller, HP700. Thanks
Answer By: Willys Jeep Parts Tech on Dec 3 2018 6:45 AM
Questions: Would you know if this steering wheel would work on a 1968 M-715?
Question By: Tod Burke on Jul 18 2018 2:49 AM
Sorry, i have not fitted one to a M715.
Answer By: Willys Jeep Parts Tech on Jul 18 2018 6:04 AM
Questions: Will this Steering wheel # 927417 work on a 1962 CJ-6? The one currently installed (17") has no horn button and looks different around the center (flatter).
Question By: Robin Stover on Jun 6 2018 9:30 PM
Yes, they used the same steering wheel. 914047 will work too.
Answer By: Willys Jeep Parts Tech on Jun 7 2018 6:02 AM
Questions: Will this wheel also fit an m38a1?
Question By: O.G. on Jan 3 2018 10:15 PM
Yes, this will also fit an M38A1 on the tube and worm. However the 24 volt horn button set up is a bit different.
Answer By: Willys Jeep Parts Tech on Jan 4 2018 5:52 AM
Questions: Does this wheel have the groove around the center hub to accommodate the snap ring in the horn rubber? I can't see it in the photos.
Question By: Tom on Jul 11 2017 2:58 PM
Unfortunately nobody makes them like this.
Answer By: Willys Jeep Parts Tech on Jul 11 2017 10:01 AM
Questions: My 1968 CJ5 has a 1/2" diameter shaft and fine (not coarse) splines. Will this steering wheel fit those 2 requirements?
Thank you, Alan
Question By: Alan on Jun 17 2016 8:44 PM
As long as you have the original tube & worm gear in there you should be all set on the install.
Answer By: Willys Jeep Parts Tech on Jun 20 2016 5:46 AM
Questions: Will this steering wheel work on a 68' jeepster commando?
Question By: Jake on Apr 29 2015 12:00 AM
Im sure it could be made to work for the application.
Answer By: Willys Tech on Apr 29 2015 12:00 AM
Questions: Hi, my 1967 CJ5 does not have a horn, does this come with some sort of cap ? also how hard is it to hook up a horn kit? thanks
Question By: Earl Scheuer on Sep 2 2014 12:00 AM
927416K is the horn button repair kit for this steering wheel. We also have 12 volt horns part number: 12VHORN
Answer By: Willys Tech on Sep 2 2014 12:00 AM
Questions: Which horn kit do I need when I order this steering wheel it show none for 2@3/8 wheel
Question By: Anonymous on Feb 22 2014 12:00 AM
927416K is the proper part number for this steering wheel.
Answer By: Willys Tech on Feb 24 2014 12:00 AM
Questions: Will the steering will and horn kit fit a 1957 CJ five
Question By: Jeff Fausett on Apr 19 2012 12:00 AM
Yes this is the correct one if you want to retro fit it. IT will go right on.
Answer By: Willys Tech on Apr 19 2012 12:00 AM
Questions: does this slide on w/keyway or threaded on
Question By: Rob W on Nov 20 2011 12:00 AM
The tube and worm gear is spined and the sheering wheel slides down the splines (is is splined as well to mate)
Answer By: Willys Tech on Nov 21 2011 12:00 AM
Questions: your cataloged items go up to '71. Is this the same wheel that was used for a '73 CJ5? could you also help me in locating a good source for other original parts (replica) for my '73?
Question By: Reynaldo on Sep 15 2011 12:00 AM
We can probably help. They are different. Please call us toll free.
Answer By: Willys Tech on Sep 15 2011 12:00 AM
Questions: how about the horn button kit for this steering wheel.
Question By: Anonymous on Aug 7 2011 12:00 AM
Its part number: 927416K
Answer By: Willys Tech on Aug 8 2011 12:00 AM
Questions: Will this steering wheel fit a 67 M715 Kaiser Jeep?
Question By: johnny on Jul 20 2011 12:00 AM
It should work fine.
Answer By: Willys Tech on Jul 21 2011 12:00 AM
Questions: What size is this steering wheel?
Question By: Anonymous on May 15 2011 12:00 AM
It is 17 in diameter just like original.
Answer By: Willys Tech on May 15 2011 12:00 AM
You Might Also Be Interested In
Weekly Willys highlights and discounts sent to your inbox
