Questions & Answers
Questions: Will this work on 12 volts with a bulb change? The description says there is a built in flasher but the wiring diagram shows a remote flasher. Will I need to purchase a separate flasher and socket?
Question By: Dave Buholzer on Jan 18 2022 3:18 PM
Yes these will work on both 6 or 12 volt.
Answer By: Willys Jeep Parts Tech on Jan 18 2022 9:34 AM
Questions: What are the length of the wire in this kit? Is there a plug in for the flasher?
Question By: Bill Lane on Oct 28 2020 1:14 PM
Approx a foot and half but will need to measure.
Answer By: Willys Jeep Parts Tech on Oct 28 2020 8:30 AM
Questions: I connect up the turn signal to my 6 volt system per the instructions and the voltage out to the light is only 4.6 volts which will not power the light, When I measured the voltage to my brake light it is right around 6.4 volts. The same bulb works on the brake light but not on the turn signal. Also I see 6.4 volts out of the flasher but it does not flash, it is a steady 6.4 volts.
Question By: John Gillich on Jan 14 2019 1:55 AM
Double check for a weak ground. Please email firstname.lastname@example.org and we can try to help out as well.
Answer By: Willys Jeep Parts Tech on Jan 14 2019 5:52 AM
Questions: Does the brake light turn off on signal direction side with this signal direction kit,or are other relays required
Question By: Chris Weekes on Dec 19 2018 4:32 PM
Really you just have a flasher you wire in. We have both 6 or 12 volt and socket if you need it.
Answer By: Willys Jeep Parts Tech on Dec 19 2018 9:49 AM
Questions: What does the external flasher do? Does it actually cause the "blinking" of the tail lights, or/and does ti make the indicator lights on the instrument cluster flash. I have this unit ready to install on.my '61 CJ-3B. There is an old flasher and plug screwed to the firewall, but it is unusable.
Question By: Ellis Johnson on Nov 11 2018 12:56 AM
Yes, that causes the to flash. You will need to wire one it depending if your 6 or 12 volt.
Answer By: Willys Jeep Parts Tech on Nov 12 2018 5:45 AM
Questions: Does this unit turn off signal light automatically with friction wheel on steering wheel or column or do you have to manually turn off?
Question By: Mike Ballinger on Jul 5 2017 5:36 PM
Manual turn off.
Answer By: Willys Jeep Parts Tech on Jul 5 2017 11:36 AM
Questions: At what amp should this unit be fused?
Question By: Tom Beaudin on Jun 22 2017 11:39 AM
The bulbs you use will determine the amps. If you have a 6 volt system, the amp would run 20-30 but if you have a 12 volt system, the amps would run 10-20. Thanks
Answer By: Willys Jeep Parts Tech on Jun 22 2017 7:35 AM
Questions: Does this unit have a built in flasher relay or does an external separate flasher relay have to be purchased with a socket and harness?
Question By: gerry on Oct 25 2016 8:05 PM
You need to get a flasher part number: 938899 (12volt) or 118699 (6 volt) we also sell the socket to wire it in part number: A1363-A.
Answer By: Willys Jeep Parts Tech on Oct 26 2016 5:43 AM
Questions: Will this kit work on a 24 Volt system?
Question By: Lawrence D. Domzalski on Jul 14 2016 1:15 PM
This is for 6 or 12 volt only. Try part number: 947345 for 24 volt
Answer By: Willys Jeep parts tech on Jul 15 2016 2:03 PM
Questions: Is this 12 volt?
Question By: Anonymous on Feb 5 2015 12:00 AM
This works on both 6 volt and 12 volt.
Answer By: Willys Tech on Feb 5 2015 12:00 AM