Questions & Answers
Questions: I am comfortable with some drilling and "small" adjustments. There is no need to weld anything for fitting this tub to my frame to fit properly?
Question By: Brent Herzberger on Feb 8 2020 4:50 PM
Typically no welding for fitment.
Answer By: Willys Jeep Parts Tech on Feb 10 2020 5:31 AM
Questions: Can I fit a M38 tub on a M38A1 frame with Hurricane engine
Question By: Jeff on Oct 6 2019 12:06 PM
They have different wheel bases so it really would not work for a proper fitment.
Answer By: Willys Jeep Parts Tech on Oct 7 2019 6:15 AM
Questions: The picture shows the roof bow brackets and side handle. Is the picture an accurate representation of the actual product? I'm sure it is not shipped assembled, but more a question about the brackets, etc.
Question By: Stephen Anderson on Aug 31 2017 8:31 PM
Unfortunately, those brackets are not included with the body tub. We do sell them separately - C1859. Thanks
Answer By: Admin on Sep 1 2017 5:50 AM
Questions: am I limited to one kit that will fit my 1950 m38 chassis
Question By: jerry on Jun 4 2014 12:00 AM
The M38 only used only one body style. If you have a M38 this is the kit.
Answer By: Willys Tech on Jun 5 2014 12:00 AM
Questions: I have a 1949 CJ3A, will this M38 tub kit fit on my frame? If so, does the tub have the pioneer kit brackets on the passenger side? (shovel and axe)
Question By: Phil on Mar 25 2014 12:00 AM
The M38 will fit but there will be some extra work associated with it going on a CJ-3A frame. It will have the indentations for tool brackets.
Answer By: Willys Tech on Mar 25 2014 12:00 AM
Questions: Does this Kit come with the access panels/floor plates around the transmission/gear shift/starter button/throttle on the M38? Does the tub have the hole(s) where they should be?
Question By: Coobey on Jan 1 1970 12:00 AM
This has all the floor panels installed on it. You will have to drill your body mounting holes and toe board holes.
Answer By: Willys Tech on Jan 13 2014 12:00 AM
Questions: Will this body fit a CJ-3B frame? Thanks
Question By: Jake on Nov 26 2013 12:00 AM
If you have the original 4-134 F head engine on your CJ-3B you may want to stick with a CJ-3B tub and just paint it green. The M38 originally used the 4-134 L head engine.
Answer By: Willys Tech on Nov 26 2013 12:00 AM
Questions: do these new tubs have the same guage thickness thanks
Question By: bruce on Oct 22 2013 12:00 AM
Yes they have the same gauge thickness.
Answer By: Willys Tech on Oct 23 2013 12:00 AM
Questions: Do you have M38 Grills?
Question By: Anonymous on Aug 31 2013 12:00 AM
673313 is our part number on our website.
Answer By: Willys Tech on Sep 3 2013 12:00 AM
Questions: Will this M38 body fit on a '55 CJ5 frame with F-head 4 cyclinder engine? If so, how much modification am I looking at doing? You work with what you have..........
Question By: Rj on Dec 27 2012 12:00 AM
They have different wheel bases and lengths so there are some changes that would have to be made. It would be easier to put a M38A1 body on there because it is closer to a CJ-5. The M38 is more similar to a CJ-3A.
Answer By: Willys Tech on Dec 27 2012 12:00 AM
Questions: hello, I'M COLOMBIAN, I WOULD LIKE TO BUY THIS ITEM, I WANT TO KNOW WHAT IS THE COST OF THIS WHITH THE COST SEND TO COLOMBIA.
Question By: crstian on Jan 30 2012 12:00 AM
We can ship these tubs out anywhere in the 48 states for FREE. I would recommend a US based freight forwarder to get it to Colombia.
Answer By: Willys Tech on Jan 31 2012 12:00 AM