Product Videos
Questions & Answers
Sort By:
Questions: Will these brake drums really fit the FC170 4w got some others and center hole to big for hub 1962 FC170 SW Thank you
Question By: Calvin G Lotz on Jun 9 2021 10:50 PM
Yes, the FC had 11" brakes originally so these drums will work for that application. Thanks
Answer By: Willys Jeep Parts Tech on Jun 11 2021 9:05 AM
Questions: I have a 46 CJ-2A that has 11" x 2 1/4" brake drums,on the rear, they were changed in the 70's. would this drum fit & have the same bolt pattern?
Question By: John R Krauss on May 19 2020 12:51 PM
Please email mike@kaiserwillys.com a picture of your brake set up and we can ID for you.
Answer By: Willys Jeep Parts Tech on May 19 2020 9:21 AM
Questions: I am upgrading a cj3b to 11 inch drum brakes. My backing plate is off a 62 wagon. But my 3 " high drum does not cover the shoes completely, leaving a 1/2 inch exposed. Will this drum fit over the shoes? This drum appears to be the same as the one I already have.
Question By: John on Oct 11 2019 2:34 PM
Make sure you have your hub mounted on the outside of the drum if you have TR/SW 11" brakes and you should be all set. Its most likely why you have the gap. The hub is being mounted backwards.
Answer By: Willys Jeep Parts Tech on Oct 11 2019 10:05 AM
Questions: I am converting the front brakes on my CJ2A to 11". I've pulled 11" brakes { backing plates, drums, etc. } from a Willys pickup truck. The bolt pattern on the drums are different than the bolt pattern on my hubs. Do you have 11" drums to fit my standard CJ2A front hubs ?
Question By: Monte Benoy on Sep 2 2019 10:18 PM
I would just need to know what the 11" brakes are off of and we can help. Email mike@kaiserwillys.com
Answer By: Willys Jeep Parts Tech on Sep 3 2019 5:42 AM
Questions: the common 11" drum fits inside hub. I have one that fits outside. how do I find more of this type
Question By: Pat Willmore on Jul 10 2017 8:45 PM
On this drum for the Willys Truck and Station Wagon the hub always mounts on the outside.
Answer By: Willys Jeep Parts Tech on Jul 11 2017 6:07 AM
Questions: will this drum fit on a 1957 jeep fc150?
Thanks
Question By: Leroy Griesse on Dec 31 2016 10:01 PM
Yes, these are for the FC-150 and FC-170 Willys too.
Answer By: Willys Jeep Parts Tech on Jan 2 2017 5:39 AM
Questions: My 11" drums are on the back side of my hubs on my wagon, are these the correct ones? Somehow the picture doesn't look quite right... If not what do I need?
Question By: William on Jun 8 2016 12:53 AM
The hubs mount on the outside of the drum.
Answer By: Willys Jeep Parts Tech on Jun 9 2016 5:58 AM
Questions: hello Will the brake backing plate &parts fit from a clamshell a rear to a dana ?? thanks chris
Question By: Anonymous on Jan 9 2015 12:00 AM
The Timken rear and and Dana 53 used the same 11 brake set up.
Answer By: Willys Tech on Jan 12 2015 12:00 AM
Questions: do these drums need to be turned & trued, or are they already machine & ready to use?
Question By: David on Nov 18 2014 12:00 AM
They are new and don't need to be machined. However anytime you mount a new hub to a brake drum you will want to make sure it is on there centered so its not a bad idea to have it checked out.
Answer By: Willys Tech on Nov 18 2014 12:00 AM
Questions: Will these front drums work on a 1950 pickup 2 wheel drive?
Question By: JERRY on Oct 14 2014 12:00 AM
Yes, they use the same 11 drums.
Answer By: Willys Tech on Oct 14 2014 12:00 AM
Questions: Will this hub fit the front of my 1949 Willys Overland Pickup? Does the hub have to be pressed out of the old one? Thanks!
Question By: Al on Sep 3 2014 12:00 AM
This drum will fit your Willys Truck yes. You have to press your old hub on and off.
Answer By: Willys Tech on Sep 3 2014 12:00 AM
Questions: I have a 50 wagon with 4wd. My drums on the front have the hub for the locker as all in one. Is there something I am missing or is that how it should be
Question By: Justin on Jul 30 2014 12:00 AM
Your hubs and drums are pressed together with your studs. This is how is was done originally. They can be pressed apart and pressed back together with a hydraulic press.
Answer By: Willys Tech on Jul 31 2014 12:00 AM
Questions: I have a 1959 Jeep wagon and I am trying to remove the drums off the rear end, without success. Noticed that the drums have the axle bolts coming thru a center section on the outside of the drum making the drum completely solid looks like a cover plate. Looking at what the diagram for new drums shows completely a different looking drum. I backed off the adjusters on the back side but the drum will not come off is their something else I need to do.
Question By: Dave on Jan 1 1970 12:00 AM
The hub and drum are pressed together with the studs.
Answer By: Willys Tech on Sep 9 2013 12:00 AM
Questions: does this come with the back plate?
Question By: jules on Aug 6 2012 12:00 AM
This is the brake drum only. The hub and backing plates are separate items.
Answer By: Willys Tech on Aug 6 2012 12:00 AM
Questions: I'm buying the disc conversion for the front..are disc brakes also optional for the rear or do I have to buy original 11 drums for my 51 willys truck
Question By: Anonymous on Dec 16 2011 12:00 AM
For the Willys Truck you'll have to stick to drum rear brakes. We have all the parts to make it like brand new for your rear 11 drums too.
Answer By: Willys Tech on Dec 16 2011 12:00 AM
Questions: what is the bolt pattern on this drum?
Question By: claude on Aug 8 2011 12:00 AM
They are 5 x 5.5 just like original
Answer By: Willys Tech on Aug 9 2011 12:00 AM
Questions: I have a 1958 FC 170 and want to know if this drum will work and can it be used on the front or rear axal?
Question By: Mark on Jul 7 2011 12:00 AM
Yes this is the proper drum for front and rear.
Answer By: Willys Tech on Jul 7 2011 12:00 AM
Questions: Im wondering if these are the same for the 64 Wagoneer ...
Question By: Mike on May 8 2016 6:57 PM
Sorry, I do not believe they are the same.
Answer By: Willy Tech on May 9 2016 5:49 AM
Weekly Willys highlights and discounts sent to your inbox
