Questions & Answers
Questions: Do you have the air filter for 1965 cj 5
Question By: Hollis on Aug 21 2018 1:47 AM
We can source your the original used oil bath air cleaner assembly. Please call and ask for Mike M.
Answer By: Willys Jeep Parts Tech on Aug 21 2018 6:16 AM
Questions: What is the proper seal (part number) that fits this air horn Item # 809785 to the Solex Carburetor?
Question By: Mark Bertik on Jan 7 2018 4:45 AM
803699 is the part number.
Answer By: Willys Jeep Parts Tech on Jan 8 2018 5:55 AM
Questions: I have a 225 V6 with a Rochester 2G. Will this air horn fit the carb?
Question By: Richard Miller on Oct 27 2016 4:24 AM
This really wont work for your set up. It could possibly be modified to fit.
Answer By: Willys Jeep Parts Tech on Oct 27 2016 5:49 AM
Questions: Will this air horn fit my new Solex carburetor?
Question By: Bill on Feb 6 2015 12:00 AM
Yes, these fit YF and Solex carburetors.
Answer By: Willys Tech on Feb 9 2015 12:00 AM
Questions: I have a Carter YF without the tapered top (straight bore) on a 59 CJ3B, it looks in the pictures that this air horn has a seal inside the clamp, and would fit the type carburetor I currently have is my thinking correct?
Question By: Ken on Oct 15 2014 12:00 AM
You should have a flange on the top of your carburetor. It should be a YF 938 and will accept this air horn. It attaches with the clamp. There was originally a paper gasket but honestly its really not necessary.
Answer By: Willys Tech on Oct 15 2014 12:00 AM
Questions: what is the neck measure (I have a aftermarket carb) It is 2.625 dia.
Question By: Anonymous on May 1 2014 12:00 AM
It is appox. 2-3/4 opening like original
Answer By: Willys Tech on May 1 2014 12:00 AM
Questions: Can i connect this air horn with the Complete Oil Bath Air Cleaner. Its for a jeep 4 134 F
Question By: Luis on Nov 13 2012 12:00 AM
Yes, you need to use the cross hose part number: 926945
Answer By: Willys Tech on Nov 14 2012 12:00 AM
Questions: can this be used on my 51 willys truck with the F-134
Question By: Anonymous on Feb 26 2012 12:00 AM
Yes it will bolt to the top of the carburetor just fine.
Answer By: Willys Tech on Feb 27 2012 12:00 AM
Questions: need only clamp and gasket, are they avaliable
Question By: Rob W on Nov 20 2011 12:00 AM
Please call us toll free. We can probably get you good used.
Answer By: Willys Tech on Nov 21 2011 12:00 AM