Questions & Answers
Questions: Does the carburetor kit #923800 have the ball check weight and check valve ball included in it?
Question By: Delroy Collins on Mar 2 2021 1:23 AM
I do believe the check ball is in there but will need to confirm.
Answer By: Willys Jeep Parts Tech on Mar 2 2021 5:36 AM
Questions: I need a rebuild kit for a Carter yf Carburetor. The number stamped on the base is 1-630. I can't seem to find the kit for that number. I have a 1950 willys jeepster. F4-134 engine. Appreciate any help. Thank you
Question By: Darrell Johnson on Dec 18 2020 1:58 AM
This kit should work for you as well. Send email@example.com some photos too of what you have.
Answer By: Willys Jeep Parts Tech on Dec 18 2020 5:46 AM
Questions: No instructions came with the rebuild kit. Can I get an instruction sheet?
Question By: Patrick Fitzgerald on Aug 16 2019 12:16 AM
https://www.kaiserwillys.com/tech-guide/fuel-carter-yf-servicing-and-adjustment Here is a link. Thanks!
Answer By: Willys Jeep Parts Tech on Aug 19 2019 5:43 AM
Questions: The number stamped on my Carter YF is 1538. Is this the correct rebuild kit for my Carburetor. My 51 Jeepster has the 4-134 F engine.
Question By: Stephen Cantando on May 1 2019 11:54 PM
Look where the linkage runs up the side of your carburetor. On the middle bowl there is a metal tab built into the side of it. There are some numbers running vertically. Those are your ID numbers for your YF.
Answer By: Willys Jeep Parts Tech on May 2 2019 5:37 AM
Questions: I have a 1968 cj5 with the Buick v6 225 in it, and it has a GM 2 jet Rochester carb in it. I can find the rebuild kit online but I would rather order my stuff from you guys. Do you carry the rebuild kit?
Question By: calvin Williamson on Mar 27 2019 8:03 PM
Please email firstname.lastname@example.org and we can help out.
Answer By: Willys Jeep Parts Tech on Mar 28 2019 6:19 AM
Questions: I have a 1957 Willys Truck with the L6-226 Engine. I cleaned off the carb and 1) it is remanufactured and 2) the only number I can find is on the bottom of the bowl 1091. It does say it is a Carter YF. Does this carb kit work? Thanks.
Question By: Jeff Joseph on Mar 15 2019 8:56 PM
Yes, this should be the correct kit for you as long as you have the YF carburetor. Thanks
Answer By: Willys Jeep Parts Tech on Mar 18 2019 6:57 AM
Questions: I have a 55 truck with a 226, from what I can tell the carb is a yf2100s. I can only assume it's a replacement. Do you know if this kit will work for it? From what I can tell, everything else looks identical, but I don't know what or if there are any small differences, thanks
Question By: Steven Kondor on Dec 13 2018 10:47 PM
Yes, I do believe it will work for you for your YF. They originally used a YF 2467 on that motor.
Answer By: Willys Jeep Parts Tech on Dec 17 2018 5:37 AM
Questions: does the master kit have all the gaskets that the reg. kit has ? for my 64 cj5 , in pic it of each it does not look like it does
Question By: Brock Baker on Mar 23 2018 6:49 PM
It does come with all the gaskets necessary. Thanks
Answer By: Willys Jeep Parts Tech on Mar 25 2018 1:59 PM
Questions: I have the carter yf 937s is this the right kit?
Question By: Sam on May 3 2017 11:24 AM
It sure it. Thanks!
Answer By: Willys Jeep Parts Tech on May 3 2017 5:55 AM
Questions: Does a float come with this kit (item # 923800)?
Question By: Mike on Sep 8 2016 3:09 PM
779966 is the part number for the float.
Answer By: Willys Jeep Parts Tech on Sep 8 2016 8:51 AM
Questions: I just bought your carter repair kit for my cj5. I do not understand the float adjustment instructions my float is set at 3/4 inch instructions say 5/16 ? How could the float get to be this far out of adjustment ?
Question By: Anonymous on Jul 14 2014 12:00 AM
I can check the book for you. Over time carburetors are gone thru and get out of adjustment.
Answer By: Willys Tech on Jul 14 2014 12:00 AM
Questions: i have 1961 willys jeep with carter yf carburater.4 cyl manual choke.What kit do i need?
Question By: robert hunter on Apr 2 2012 12:00 AM
This should be the proper carburetor kit for you.
Answer By: Willys Tech on Apr 3 2012 12:00 AM
Questions: I have a 58 willys wagon with a flat head six. carb # F70 2467S will this kit work and do you sell the float also ? thank you
Question By: tom on Nov 25 2011 12:00 AM
Yes this is the correct one for your Carter YF.
Answer By: Willys Tech on Nov 28 2011 12:00 AM
Questions: what's the difference from the $45 Master kit?
Question By: robert on Jul 15 2011 12:00 AM
The master kit has some additional linkage and jets along with it.
Answer By: Willys Tech on Jul 15 2011 12:00 AM
Questions: I have a 1962 cj5 with a carter 0-944 carb will this repair kit fit my jeep
Question By: robert on May 31 2011 12:00 AM
As long as you are a YF yes it should be fine. They originally used a YF 938 on the CJ-5.
Answer By: Willys Tech on Jun 1 2011 12:00 AM
Questions: I have a 1960 FC-150, Carter YF 938 SD. Just want to make sure this is the correct rebuild kit. Thanks
Question By: Patrick on Mar 30 2011 12:00 AM
Yes, this is the correct one for the YF.
Answer By: Willys Tech on Mar 31 2011 12:00 AM
Questions: I bought a 1965 Jeep 4 Cyl 3 shifts and Reverse this will fit the carbulator.
Question By: Jose Ramos on May 18 2016 5:29 PM
You should have a YF 938 so yes that is correct.
Answer By: Willys Tech on May 18 2016 11:16 AM