Product Videos
Questions & Answers
Sort By:
Questions: Do you have a part number for the paper gasket to use with the diffuser?
Question By: Darder Johnny on Nov 5 2020 8:52 PM
This is just the gasket - 648977. Thanks
Answer By: Willys Jeep Parts Tech on Nov 9 2020 3:51 AM
Questions: Do you need this gasket? When I got my MB it did not have one.
Question By: Zack on Aug 28 2019 9:01 PM
I would recommend it. They are shown in the original manuals.
Answer By: Willys Jeep Parts Tech on Aug 29 2019 6:02 AM
Questions: How thick is the gasket
Question By: Dennis J Wilson on Apr 13 2019 10:32 PM
It measures out at 1/4" thick. Thanks
Answer By: Willys Jeep Parts Tech on Apr 15 2019 4:01 AM
Questions: Is 1 3/8 centerline for this gasket the same as 2 3/8 hole to hole for the other gasket?
Question By: Bob on Dec 12 2018 6:48 PM
Not sure what other gasket your referring to. Please email mike@kaiserwillys.com happy to help.
Answer By: Willys Jeep Parts Tech on Dec 13 2018 5:34 AM
Questions: I suppose these were originally designed to make the Carter WO carburetors work better. Will they make the Solex replacement carbs work better too?
Question By: Bill Reiter on Jun 4 2018 4:28 PM
You can use them on the solex as well.
Answer By: Willys Jeep Parts Tech on Jun 4 2018 12:09 PM
Questions: What is the purpose of the metal V? Does this get installed mounted up or pointing down? Do you need another gasket for mounting the carburetor?
Question By: Roy Puller on Jan 21 2018 4:43 PM
Pointed down. It put a 'spin' on the fuel air mixture. Another gasket is not necessary.
Answer By: Willys Jeep Parts Tech on Jan 22 2018 11:59 AM
Questions: Is this the same gasket that comes with the carburetor- item #: 923806?
Question By: Jackson on Sep 23 2014 12:00 AM
They use a paper gasket with the 923806. We do recommend getting this gasket as well.
Answer By: Willys Tech on Sep 23 2014 12:00 AM
Questions: Will this work on an m38 with a carter ys carb?
Question By: Anonymous on Jan 25 2012 12:00 AM
Yes it will mount up.
Answer By: Willys Tech on Jan 25 2012 12:00 AM
Questions: My studs stick up too high and hit the body of my carberator, will this gasket elevate it so that this doesn't happen?
Question By: Bud Smith on Nov 2 2011 12:00 AM
It should solve your problem for you yes.
Answer By: Willys Tech on Nov 2 2011 12:00 AM
Questions: Which way does this mount? Does it mount like the photo above or does the V point downward?
Question By: Anonymous on Feb 4 2011 12:00 AM
The V is pointing down into the manifold.
Answer By: Willys Tech on Feb 7 2011 12:00 AM
Weekly Willys highlights and discounts sent to your inbox
