Product Videos
Questions & Answers
Sort By:
Questions: Dumb question, but if I am buying just an overhaul brake kit with with drum/pads/cylinder, do I need this to pull the rear drums? If so, why in the world would they make the brakes to require this puller just to pull the drum?? I get pressed in half axles and the like, but brake drums?
Question By: Don on Apr 29 2019 11:37 PM
Your rear axles are tapered and the hub will not come off without the puller. If you do have the later style brakes you could remove the three counter sunk screws.
Answer By: Willys Jeep Parts Tech on Apr 30 2019 6:14 AM
Questions: will this tool also work on front wheels?
Question By: Rex Dillman on Oct 8 2017 8:30 PM
It will not. You should have spindle nuts in the rear which can be removed by using A692. You could also use HP700. Thanks
Answer By: Willys Jeep Parts Tech on Oct 9 2017 5:44 AM
Questions: will this tool work on 1945 jeep?
Question By: Rex Dillman on Oct 8 2017 8:26 PM
It will not. You should have spindle nuts in the rear which can be removed by using A692. You could also use HP700. Thanks
Answer By: Willys Jeep Parts Tech on Oct 9 2017 5:40 AM
Questions: Haven't been able to remove the axle shaft keys on either side of my 48 truck. The hub seems to have shifted too much. Will this tool still work?
Also, one hub has no studs at all...
Question By: Jim McCullough on Aug 23 2017 8:37 PM
You would have to pull the hub/drum off with this before the key comes out. They get very stuck in there.
Answer By: Willys Jeep Parts Tech on Aug 23 2017 1:39 PM
Questions: My rear hub on a 1947 CJ2A has two studs broken off between studs that are still in place (three good studs separated by a broken stud). Will I still be able to connect this to the hub with the three studs in a triangle pattern?
Question By: Mike Millard on Sep 8 2016 1:47 AM
As long as you can line up the puller in the triangle pattern on the three studs you should be ok.
Answer By: Willys Jeep Parts Tech on Sep 8 2016 5:52 AM
Questions: Have 2 jeeps, one is 1942 Ford, other is a 1946 Willys cj2a (no lugs on the one of the hubs). Will this tool work on both vehicles? If not, what is recommended by you. Need to pull hubs off of both jeeps.
Question By: dave on Jun 10 2015 12:00 AM
You don't need this on your 41-45 MB because it doesn't have tapered axles. It is for all Willys after 1946.
Answer By: Willys Tech on Jun 11 2015 12:00 AM
Questions: Can i get the same puller but with 5 fingers? Just like the one in your you tube video? Thanks!
Question By: Gino Hache on Apr 9 2015 12:00 AM
Sorry these are made in 3 finger only. They are extremely heavy duty.
Answer By: Willys Tech on Apr 10 2015 12:00 AM
Questions: I have a 58' Dj 3A Model. 2 wheel drive. The left side has the righty loosely, lefty tighty threads. The left side the opposite. Do you I need a hub puller to check the brakes in the front and the rear. I just replaced the shocks.
Question By: John D. Smith on May 20 2014 12:00 AM
You will need a hub puller to get the rear drums off.
Answer By: Willys Tech on May 21 2014 12:00 AM
Questions: how do you take the front brake drums off a cj2a willys jeep?
Question By: gary miller on May 15 2014 12:00 AM
A692 is the part number you will need to loose the spindle nuts up.
Answer By: Willys Tech on May 15 2014 12:00 AM
Questions: Hi, do you have a slide hammer for it also? My cj2a drum came off without the puller, but I can't get the axle out now.?.? I thought I could throw the drum and nut on, and then use a slide hammer with the puller. Would that work?
Question By: Mike on Dec 28 2013 12:00 AM
The slide hammer is a local NAPA item.
Answer By: Willys Tech on Jan 2 2014 12:00 AM
Questions: Will it work on a 1967 Jeepster Convertible rear hub? The axle is a dana 30.
Question By: Anonymous on Oct 25 2013 12:00 AM
As long as you have a tapered axle rear end it will.
Answer By: Willys Tech on Oct 25 2013 12:00 AM
Questions: Will this work on 48 Jeepster ?
Question By: Al on May 22 2013 12:00 AM
Yes these come with a warrenty. But we have never really had a return on them. Just make sure to grease the center bolt.
Answer By: Willys Tech on Jul 29 2013 12:00 AM
Questions: Will this tool work for a 1955 willys aero custom it's a four lug hub?
Question By: Lyle on Dec 4 2012 12:00 AM
Yes it will.
Answer By: Willys Tech on May 22 2013 12:00 AM
Questions: Hi is this tool made in the usa? And does it come with a case or just loose as pictured. Thanks!
Question By: Austin Aubinoe on Oct 27 2012 12:00 AM
These are USA made and come as pictured.
Answer By: Willys Tech on Oct 29 2012 12:00 AM
Questions: will this work on the front drums to?
Question By: dale on Oct 5 2012 12:00 AM
It is not needed on the front. For the front you need A692 socket.
Answer By: Willys Tech on Oct 8 2012 12:00 AM
Questions: My right rear hub has all the lugs broken but 1, any ideas on how to get the hub off?
Question By: Marty on Sep 1 2012 12:00 AM
You will have to use a puller that pulls from the outside lip. We dont recomment them because you can warp your drum/hub.
Answer By: Willys Tech on Sep 4 2012 12:00 AM
Questions: Will this work with a hub that has 5bolts?
Question By: Lisa on Aug 26 2012 12:00 AM
All Willys were 5 stud so yes.
Answer By: Willys Tech on Aug 27 2012 12:00 AM
Questions: I have already knoked the studs loose hoping that that would let be get the hub off but such was not the case. Now there are no lug studs to pull on does this tool still work wit h absent studs? If not how do I get that damn hub off?
Question By: Anonymous on Apr 14 2012 12:00 AM
You need the studs to use this tool. Please call us toll free. We may be able to help.
Answer By: Willys Tech on Apr 16 2012 12:00 AM
Questions: wiLL this tool work on a 51 henryJ CAR
Question By: ken roggow on Mar 14 2012 12:00 AM
Im sure it would.
Answer By: Willys Tech on Mar 15 2012 12:00 AM
Questions: I have 1949 willys jeepster. Do you give detailed instructions with puller?
Question By: Mike on Sep 9 2011 12:00 AM
This is guaranteed to work. If you have any questions how to set it up please free to call us toll free. We can walk you thru it. They are super heavy duty and guaranteed not to fail.
Answer By: Willys Tech on Sep 9 2011 12:00 AM
Questions: how and what do i use to pull the axil out with
Question By: Anonymous on May 14 2011 12:00 AM
This hub puller will get your hub and drum off. Ones thats done there is nothing holding the axle in. Just slide it off.
Answer By: Willys Tech on May 15 2011 12:00 AM
Questions: WILL this hub puller work with a 53 Kaiser Deluxe?
Question By: PATRICK on Mar 9 2011 12:00 AM
Yes, it will work with the Kaiser as well.
Answer By: Willys Tech on Mar 10 2011 12:00 AM
You Might Also Be Interested In
Weekly Willys highlights and discounts sent to your inbox
