Questions & Answers
Questions: I need two of these for my 50 Jeepster, do you stock?
Question By: Charles McDonald on Dec 13 2020 11:15 AM
Yes, these are in stock and ready to ship. Thanks
Answer By: Willys Jeep Parts Tech on Dec 14 2020 3:34 AM
Questions: will this work for Willeys 1948 cj-2a ?
Question By: mike on Sep 24 2020 1:13 AM
The CJ-2A didnt originally use these.
Answer By: Willys Jeep Parts Tech on Sep 24 2020 5:46 AM
Questions: Hey Mike, I talked to you on the phone today. I believe you said the bushing was 1“ OD, 7/8” ID. Is that correct? If that is so do I need to drill out or ream out the pedal to accept the new bushings? The Holes in mine are just over 7/8” Thanks
Question By: Maynard David on Mar 24 2020 12:04 AM
Yes, you must ream to exactly 1" for proper fitment.
Answer By: Willys Jeep Parts Tech on Mar 24 2020 5:48 AM
Questions: need a bushing for my 48 cj2a brake arm will this one work
Question By: bruce Miller on Feb 13 2020 6:38 PM
No, these would not be correct. The CJ-2A never used bushings on the brake arm. If you have some play, you should check the cross shaft as that is what the arm attaches to. Please give us a call toll free at 888-648-4923 if you have any other questions. Thanks
Answer By: Willys Jeep Parts Tech on Feb 14 2020 8:20 AM
Questions: Do you carry brake and clutch pedal arms for a 1955 willys pickup?
Question By: John Ozga on Oct 31 2019 9:38 PM
Those are good used. Please email email@example.com
Answer By: Willys Jeep Parts Tech on Nov 4 2019 5:37 AM
Questions: 1955 md m38a1 need brake pedal bushing
Question By: rich boyd on Apr 17 2018 9:17 PM
We have new cross shaft A495 and pedal arms that will fix you up. Please call us toll free and ask for Mike M.
Answer By: Willys Jeep Parts Tech on Apr 18 2018 6:11 AM
Questions: I need the same bushings for my '51 Jeepster. Any suggestions? Thanks.
Question By: Richard McFarland on Dec 10 2017 4:36 AM
I would have a machine shop sleeve it there locally.
Answer By: Willys Jeep Parts Tech on Dec 11 2017 11:00 AM
Questions: My 58 wagon's clutch peddle wobbles like crazy. I'm guessing it's the bushing, haven't crawled under it yet..... Assuming this IS the problem, do the bushings have to be pressed on?
Question By: Bill Green on Sep 2 2017 1:23 AM
Yes, that is correct. Thanks!!
Answer By: Willys Jeep Parts Tech on Sep 5 2017 6:14 AM
Questions: Do you have one for a CJ3a or M38?
Question By: Robert Lewis on Mar 19 2017 10:21 PM
Sorry they didn't use these originally on these.
Answer By: Willys Jeep Parts Tech on Mar 20 2017 6:09 AM
Questions: I'm still putting finishing touches on my 48 willys I nee the bushings for the break and clutch arm that pivots do you have a part number
Question By: Bryan Reeve on Apr 5 2014 12:00 AM
This is the proper part above.
Answer By: Willys Tech on Apr 7 2014 12:00 AM
Questions: good for 71 cj5 clutch pedal ?
Question By: terry on Jun 14 2012 12:00 AM
No this is only for the vehicles listed
Answer By: Willys Tech on Jun 14 2012 12:00 AM
Questions: will this bushing work on my 1970 cj5 brake and clutch linkage
Question By: chris miller on Jan 4 2012 12:00 AM
Probably not but we do have a few different sizes available. Please call us toll free. We can help.
Answer By: Willys Tech on Jan 5 2012 12:00 AM
Questions: WILL THIS PART WORK ON A BRAKE PEDAL 1944 WILLYS MB?
Question By: MARK on Nov 29 2011 12:00 AM
This is for Willys Truck / Station Wagon only
Answer By: Willys Tech on Nov 29 2011 12:00 AM