Questions & Answers
Questions: Can you give me a quote on the brake kit for a1949 truck sent to Canada alberta
Question By: jim on Sep 27 2019 3:56 PM
Please email firstname.lastname@example.org your full shipping address and we can quote you out. Thanks!
Answer By: Willys Jeep Parts Tech on Sep 27 2019 10:51 AM
Questions: I inherited an M38A1 with 11" brakes. As far as I can tell the brakes are from a 1964 FC150. This kit looks right except for all my wheel cylinders have a diagonal bolt pattern and these appear to be horizontal. My right front wheel cylinder has the part number FD-14203. Is this kit the correct one for me?
Question By: Saben j Western on Apr 20 2019 10:32 PM
Sounds like its not off a FC then. Please email email@example.com your brake set up and I can ID for you.
Answer By: Willys Jeep Parts Tech on Apr 22 2019 5:35 AM
Questions: Will this kit fit a 1949 truck with the Timken split housing rear axle?
Question By: Phil on Oct 1 2018 4:25 PM
Yes, it is the correct kit.
Answer By: Willys Jeep Parts Tech on Oct 1 2018 11:55 AM
Questions: Will this 11" kit work on a m38
Question By: chuck defino on Feb 6 2018 7:43 PM
Yes, if you have Willys Truck or Willys Station Wagon brake backing plates. We can get you good used. Call and as for Mike M.
Answer By: Willys Jeep Parts Tech on Feb 6 2018 11:46 AM
Questions: Will this kit work on a 1961 FC 150 or do you have a complete brake overhaul kit for that vehicle?
Question By: Andy V on Jun 5 2017 7:51 PM
yes, this is the same kit.
Answer By: Willys Jeep Parts Tech on Jun 5 2017 1:03 PM
Questions: I have a 61 overland, and I'm getting ready to start chassis restoration. I want to stay with drumb brakes front and back for now. I want to overhaul brakes completly and upgrade with new double master.Do you sell the overhaul kits without the standard master?Also I may change the front brakes latter to disc, which master cylinder should I go with?
Question By: Jeff Burlingame on Jan 3 2017 10:03 PM
We can swap out the master cylinders for you and set you up with a prop valve to accommodate. Please call us toll free and we can help.
Answer By: Willys Jeep Parts Tech on Jan 4 2017 5:44 AM
Questions: I have 11' brakes on a cj2a. I bought them several years ago as a kit. they are different from the early pu/sw in that they are not anchored on the bottom but have a star adjuster like later brake systems. What jeep do they come from and do you carry the parts
Question By: Everett Cole on Jul 4 2016 7:58 PM
Please email firstname.lastname@example.org a picture of the set up and I can ID for you and help get the parts for them. Thanks!
Answer By: Willys Jeep Parts Tech on Jul 5 2016 5:22 AM
Questions: will i need new back plates to put this on a cj3a and will my stock wheels still fit ?
Question By: Anonymous on Apr 6 2015 12:00 AM
Your stock rims should work fine. Yes you will need new backing plates to run 11 brakes on a CJ-3A.
Answer By: Willys Tech on Apr 7 2015 12:00 AM
Questions: Brake overhaul kits. 1959 CJ5, Measured across the brake shoes = 11. Have they have been swapped out at one time or another? The 11 inch kit indicates 46-64 truck, not the CJ5. I've already order the seals, etc. will they work?
Question By: Chuck Frankenfield on Jan 21 2015 12:00 AM
You don't measure brakes across the shoes. Always measure the inside diameter of the brake drum itself (machined surface to machined surface) Please email us pictures of your brakes and we can ID for you what you have on there.
Answer By: Willys Tech on Jan 22 2015 12:00 AM
Questions: Can you guys set me up for rear overhaul only.thanks
Question By: Dave on Sep 3 2013 12:00 AM
Sure. Please call us toll free. We can work it up for you.
Answer By: Willys Tech on Sep 4 2013 12:00 AM
Questions: i have a 1953 jeep m38a1 but it has 11 in drums on the in side so i dont know if they are differant axles but the overhaul kit should work if they are 11in right ?
Question By: justin moon on Jul 18 2013 12:00 AM
Someone put unoriginal brakes on your vehicle. Please call us toll free. We can help you ID what you have get you the right parts.
Answer By: Willys Tech on Jul 19 2013 12:00 AM
Questions: Is this a direct bolt on kit that would replace the 9 drums on a 1947 CJ2A to the larger 11 drums?
Question By: Anonymous on Apr 26 2013 12:00 AM
You will need different brake backing plates for a CJ-2A. Please call me toll free.
Answer By: Willys Tech on Apr 26 2013 12:00 AM
Questions: will this kit work on a 1952 m38a1
Question By: Anonymous on Aug 6 2012 12:00 AM
Yes you can convert over with backing plates.
Answer By: Willys Tech on Aug 7 2012 12:00 AM
Questions: Will this kit work to convert my 9 brakes to 11 on my 43 MB?
Question By: Anonymous on Apr 9 2012 12:00 AM
Yes it will work just fine if you get TR/SW brake backing plates.
Answer By: Willys Tech on Apr 9 2012 12:00 AM
Questions: My Willys Truck is a 1960 model, built in Australia, could you confirm that this break kit would be the correct one. It is right hand drive with Tornado 230 engine.
Question By: Anonymous on Feb 10 2012 12:00 AM
Yes it will be the correct one for you.
Answer By: Willys Tech on Feb 10 2012 12:00 AM
Questions: Do you offer any 55 4wd truck brake overhaul kits without master cylinder included. I have installed pedals & master cylinder from a chevy p/u dont need master cylinder
Question By: patrick on Jan 3 2011 12:00 AM
Sure. Please call me toll free. Im more than happy to help out on this.
Answer By: Willys Tech on Jan 4 2011 12:00 AM
Questions: Do you offer any brake kits without the mastercylinder For 55 willys pu
Question By: patrick on Jan 2 2011 12:00 AM
Sure. Please call me toll free.
Answer By: Willys Tech on Jan 3 2011 12:00 AM
Questions: Is the BRAKE4WD overhaul kit available with the dual master cylinder?
Question By: Bill on Dec 6 2010 12:00 AM
Sure. Please call us toll free. Thanks!
Answer By: Willys Tech on Dec 7 2010 12:00 AM