Questions & Answers
I need a new front crossmember for a 1949 CJ2A. I purchased the one above thinking I was going to do a power steering conversion but now I want to stay with the stock steering. Can I make this crossmember work? If not where can I get a crossmember that will work?
Willys Jeep Parts Tech:
You will have to go through a salvage yard for the part that you are looking for. Unfortunately, we don't have any information for upgrades to power steering.
You will have to go through a salvage yard for the part that you are looking for. Unfortunately, we don't have any information for upgrades to power steering.
I am looking for a front crossmember for a CJ-3B. Is this CJ-2A crossmember the same length, O.D. and arc (curvature). Could it be used in my application with some modifications ?
Willys Jeep Parts Tech:
I dont think it will have the proper length side to side for you. Give us a call and we can try to help you with measurements.
I dont think it will have the proper length side to side for you. Give us a call and we can try to help you with measurements.
Is there a crossmember with the bell crank attach point available? for my 47 CJ2A
Willys Jeep Parts Tech:
677008 but confirm what bellcrank you have on yours.
677008 but confirm what bellcrank you have on yours.
I am looking for the cover that goes over the round crossmember
Willys Jeep Parts Tech:
Not sure exactly what you mean. Email mike@kaiserwillys.com to help.
Not sure exactly what you mean. Email mike@kaiserwillys.com to help.
Will this crossmember work on a 1948 cj2a? I Am updating the steering so the bell crank placement is not an issue.
Willys Jeep Parts Tech:
It will fit between the frame rails yes as long as your bellcrank is not a concern.
It will fit between the frame rails yes as long as your bellcrank is not a concern.
Just brought home a 1948 CJ2A, no front crossover...does this '46 crossover fit the '48?
Willys Jeep Parts Tech:
They are different between the two but are dimensional the same between the frame rails.
They are different between the two but are dimensional the same between the frame rails.
any reason i couldn't cut the bell crank off my old crossmember and weld to this?
Willys Jeep Parts Tech:
Im sure its possible to do.
Im sure its possible to do.
I have a 1947 CJ2A ser#128000 I need to replace the front crossmember and frame front rails . My bell crank mount is welded to this cross member. The diagram of the crossmember item A1203 does not show the bell crank mount attached to the crossmember. Does the mount come with the crossmember and if so would I have to weld it to the crossmember. If I have to order the bell crank mount separate please reply with the proper mount item #. I appreciate the help
Willys Jeep Parts Tech:
That is available used only. Please call us toll free and we can try to help you with your CJ-2A
That is available used only. Please call us toll free and we can try to help you with your CJ-2A
I have a CJ2A and I need to replace this crossmember. Do you have one with the Bell crank installed or do I have to cut the Bell crank off of my old one.
Willys Jeep Parts Tech:
That will have to be cut out of a salvage yard.
That will have to be cut out of a salvage yard.
Does it matter if its' an early or late model 2a, on the bell crank mounts, and is there a recommended way of installing this part?
Willys Tech:
This is for early style. I think either can be used however.
This is for early style. I think either can be used however.
Does it also have the mount for the bell crank
Willys Tech:
Yes they will have the mount with it.
Yes they will have the mount with it.
YOU MIGHT ALSO BE INTERESTED IN
