Product Videos
Questions & Answers
Hi, Will this fit a M38A1, with modification?
Willys Jeep Parts Tech:
No they will not.
No they will not.
Will these fit a 1952 Willys Aero?
Willys Jeep Parts Tech:
Sorry, these are for a CJ-3B and CJ-5 only.
Sorry, these are for a CJ-3B and CJ-5 only.
Will these fit a 1967 Jeepster Commando?
Willys Jeep Parts Tech:
Sorry, I don't believe so.
Sorry, I don't believe so.
Look for bezel's to replace the pitted ones on my FC150. Will these fit?
Willys Jeep Parts Tech:
These are the proper ones for the Willys FC-150 and FC-170.
These are the proper ones for the Willys FC-150 and FC-170.
My 1948 CJ-2a has a PTO which I will be removing to install this overdrive. Will the shift lever for this unit use the same hole in the floor?
Willys Jeep Parts Tech:
Typically it would as long as your PTO used the same spot in the floor board as the access cover.
Typically it would as long as your PTO used the same spot in the floor board as the access cover.
Does this kit contain everything needed for the installation? If not what else is required?
Willys Jeep Parts Tech:
You would just need a boot and retainer ring. I recommend part numbers: 640877 & 640708
You would just need a boot and retainer ring. I recommend part numbers: 640877 & 640708
What is the diameter of this bezel
Willys Jeep Parts Tech:
ID 7-1/4" OD 8-7/8" like original.
ID 7-1/4" OD 8-7/8" like original.
Do the bezels come in black or a non chromed surface?
Willys Tech:
These only come in chrome like orignial. Im sure they could be painted.
These only come in chrome like orignial. Im sure they could be painted.
YOU MIGHT ALSO BE INTERESTED IN
