Questions & Answers
Questions: Mike, I have the turn signal switch kit. I don't have a flasher. My Jeep is a '52 CJ-3A. It's converted to 12 volt. What else do I need to hook up the front turn signals. I have the original front parking lamps/lens but there is no wiring to them. Thanks much.
Question By: Chip on Mar 28 2020 5:19 AM
You will need the flasher (938899) and the socket (A1361). Thanks
Answer By: Willys Jeep Parts Tech on Mar 30 2020 4:09 AM
Questions: Does it matter which wire goes to black wire on signal unit and which wire goes to power and which wire is not used? The flasher has X, L, and P stamped by the prongs.
Question By: Jim Heinrichs on Nov 14 2018 3:48 PM
This is how you should wire it: X- POWER L - OUTPUT P - PILOT LIGHT
Answer By: Willys Jeep Parts Tech on Nov 14 2018 8:27 AM
Questions: The wiring diagram that goes with your turn signal kit only shows 2 wires to the flasher. Where does the third wire go from the flasher?
Question By: dean champeau on Dec 7 2017 4:17 AM
That is if you what an indicator light in your turn signal switch itself on the column.
Answer By: Willys Jeep Parts Tech on Dec 7 2017 5:47 AM
Questions: will this work with 938899 on my 1951 m38 12v?
Question By: gene martin on Apr 16 2017 3:02 AM
Yes, they are used together.
Answer By: Willys Jeep Parts Tech on Apr 17 2017 5:37 AM