Questions & Answers
Questions: I require a 12" oil filter inlet hose for an MB Jeep ( as I have a steel capillary line feeding up between the fuel pump). Can I use the Oil Filter Inlet/Outlet Hose (#910290) for this purpose? I do note the different capillary size between the old flex line and item #910290.
Question By: clay vogelzang on Jul 1 2021 5:40 AM
10" on the outlet is what you need. Send some photos of your vehicle and we can see what all is going on. Thanks!
Answer By: Willys Jeep Parts Tech on Jul 1 2021 5:54 AM
Questions: Do the fitting on this hose swivel on both sides or just one side like the factory one.
Question By: JAY on May 11 2020 3:22 PM
They are made like original: 1 stationary 1 swivel
Answer By: Willys Jeep Parts Tech on May 12 2020 6:04 AM
Questions: Do you offer this line in a custom length? I need a 26” length. I have a 1948 2A with a Monarch Hy-Lo pump installed where the oil filter would normally be. The filter was relocated to the driver’s fender and the current hose is just over 25”.
Question By: Doug on Feb 4 2020 4:48 AM
647585 is a 30" hose that we do offer.
Answer By: Willys Jeep Parts Tech on Feb 4 2020 6:04 AM
Questions: Seems like this 22" rubber inlet hose is going to be real close to the exhaust manifold. Any possibility it could get too hot?
Question By: William Darrow on Jan 14 2019 6:32 PM
Id have to see how you have it routed. They stay pretty clear of it. Please email an image to email@example.com
Answer By: Willys Jeep Parts Tech on Jan 14 2019 10:45 AM
Questions: what is the thread pitch of the fitting that gos on the block?
Question By: JASON BASS on Feb 27 2018 5:43 PM
1/8" NPT on male and 1/4" tube inverted flare on female
Answer By: Willys Jeep Parts Tech on Feb 27 2018 12:17 PM
Questions: I have a 1952 M38A1 is this the correct oil filter inlet hose of 22 inches? I saw the 10 inch hose, and I think it is to small for my application. Please advise before I order this. Do I need to measure the hose? Thanks, for your help in this matter. Respectfully, Jim
Question By: James Kelly on Sep 8 2016 3:10 AM
It depends where your canister is mounted. Please call us toll free and we can help. I would measure off your canister to confirm distance.
Answer By: Willys Jeep Parts Tech on Sep 8 2016 5:53 AM
Questions: I bought this 3/8 OD hose (647584) 2 or 3 years ago and I apparently bought another one the same length but 1/2 OD. I installed the 1/2 OD hose a year or so ago to the military style filter canister on my early 46 Cj2a jeep. Since I will not need the 647584.hose can I return it for credit against other purchases?
Question By: Robert on Jan 8 2015 12:00 AM
Sure if you need to return no problem. Just call us toll free.
Answer By: Willys Tech on Jan 8 2015 12:00 AM
Questions: Do you recommend putting an oil cooler inline with the inlet or outlet of the oil filter? I have a 1948 Jeep CJ-2A L-134 Engine
Question By: Lucas on Apr 30 2014 12:00 AM
No, that is not necessary.
Answer By: Willys Tech on Apr 30 2014 12:00 AM
Questions: I ordered this hose along with the oil filter and. The other hose. The connector on this hose is to big for the outlet is there another size. The other hose the connector that screws into the oil canisters. Fits the outlet my jeep is a 49 CJ 3 A
Question By: Kevin on Jun 9 2013 12:00 AM
You just need to go to your local NAPA and pick up a 49 cent adapter fitting and you are all set.
Answer By: Willys Tech on Jun 10 2013 12:00 AM
Questions: My original oil hose has fine threads, a replacement I got at the local parts dealer Part # 17470.06 has coarse thread. Does yours have fine thread..Going on '52 L134 cj3a
Question By: Bill on Oct 21 2012 12:00 AM
Yes I beleive they are fine thread. What we sell has the most common pitch configuration used by Willys.
Answer By: Willys Tech on Oct 22 2012 12:00 AM
Questions: Do these hoses replace the originel metal tubing
Question By: Dennis on Aug 26 2011 12:00 AM
These vehicles typically had flex lines but some did metal lines. So yes it replaces either.
Answer By: Willys Tech on Aug 26 2011 12:00 AM
Questions: What other line is required for the oil filter canister? My oil canister and bracket were missing when I bought the jeep so I am trying to replace the set up. Is it the A-1198 oil line? And where does it connect to? The jeep is at the deer lease so I can't look at it.
Question By: Charles Reed on Feb 4 2011 12:00 AM
The Oil Filter Outlet Hose part number: 647583. We also have the mounting bracket: A1247 They attached to the front passenger side of the block on the head studs.
Answer By: Willys Tech on Feb 4 2011 12:00 AM
Questions: My oil lines arent hooked up right, but I can't seem to find where this one goes, theres an inlet a few inched behind the fuel pump pointed down at a 45 degree angle, is that the one the description is talking about?
Question By: Brian on Dec 2 2010 12:00 AM
Yes, that is correct.
Answer By: Willys Tech on Dec 3 2010 12:00 AM