Questions & Answers
Questions: Would this hose fit a 1943 jeep too?
Question By: Eric Nelson on Oct 6 2020 2:38 AM
647584 is what you want for the Willys MB and GPW.
Answer By: Willys Jeep Parts Tech on Oct 6 2020 5:56 AM
Questions: The existing hose on my engine (I believe from a 50's CJ3B) is over 30" long. It runs from the port on the block, which is behind the fuel pump, around the front of the engine to the oil filter. Is a longer hose or an adapter available?
Question By: Andy on Oct 27 2019 1:31 PM
I think someone has misrouted it thru the years. Email firstname.lastname@example.org and we can help you.
Answer By: Willys Jeep Parts Tech on Oct 28 2019 5:36 AM
Questions: I ordered this 647585 inlet hose for my 54 M38a1. It fits into the side of the black next to the fuel pump but doesn't fit into the oil canister at the top. Its too large? Am I ordering the wrong one? Which one should i order?
Question By: Tim J Brady on Apr 5 2017 10:51 PM
You need the proper fitting on the canister. Please call us toll free and we can help you out. Thanks!
Answer By: Willys Jeep Parts Tech on Apr 6 2017 6:15 AM
Questions: I need a oil pressure hose, engine to steel tube on firewall for my 1956 CJ-3B will the CJ2a ,CJ3a hose work?
Question By: Don Stengel on Sep 10 2014 12:00 AM
Yes, the Al198 will work for you.
Answer By: Willys Tech on Sep 11 2014 12:00 AM
Questions: I have a cj-2a but the Oil filter inlet hoses made to fit my vehicle are impossible to put on without taking the engine out. I need a longer hose than 21. Does this hose have the same fittings on the ends as the Oil filter inlet hose for the cj-2a?
Question By: Pat on Nov 9 2013 12:00 AM
Sounds like you have something unoriginal on there then. Please call us toll free. We can go over it.
Answer By: Willys Tech on Nov 11 2013 12:00 AM
Questions: I have another question, my jeep, I believe is a 4-134 F engine, has both ends of the line tapered I believe. I ordered an oil line for it before but when it cam in it had both ends like a brake line tightening style and it was to big to fit into the jeep. is there a way I can be sure of the engine model before purchasing more parts? I can not find the model number but I found the serial number. thanks for all the help.
Question By: Zach on May 28 2013 12:00 AM
Willys used a few different style hoses and fittings thru the years. What we sell is the most common pitch configuration used. All you may have to do get a 49 cent adapter fitting.
Answer By: Willys Tech on May 29 2013 12:00 AM
Questions: Hello. dose this oil line have a tapered end or dose it have like a flange on the end and a separate threaded piece to tighten down on?
Question By: Zach on May 25 2013 12:00 AM
Yes that is correct, one end is stationary and the other a swinel stud. They are 1/4 pipe thread.
Answer By: Willys Tech on May 27 2013 12:00 AM
Questions: Are there swivels on this hose and also the outlet hose for easy installation? Also, on my CJ5, there is a short hose (about 10) that connects to the inlet hose. I assume this was not original and was done later?
Question By: Anonymous on Oct 30 2011 12:00 AM
These are the original most common pitch and ends used on these Willys Jeeps.
Answer By: Willys Tech on Oct 31 2011 12:00 AM
Questions: NEED A LONGER HOSE FOR A 1949 .Are the fittings the same as the 24 inch?
Question By: mike on Jul 2 2011 12:00 AM
Yes it should work just fine.
Answer By: Willys Tech on Jul 5 2011 12:00 AM