Questions & Answers
Questions: I have a 1947 WILLY's A2 that is a 6V system. Can I get this heater in a 6V or will I need to convert it to a 12V?
Question By: Jim on Jun 6 2019 9:57 PM
I'm sorry but as of right now these heaters are only available for the 12 & 24 volt systems. Thanks
Answer By: Willys Jeep Parts Tech on Jun 7 2019 7:36 AM
Questions: Does this have a template for drilling the 3" holes and the mounting screw holes?
Question By: DONALD f TORREY on Jan 3 2018 6:22 PM
You'll have to make a template off the bracket provided with it.
Answer By: Willys Jeep Parts Tech on Jan 3 2018 11:05 AM
Questions: Have 48 Jeepster 6 v system. Anybody working on a 6 volt heater or can you keep an eye out for one to recondition?
Question By: Larry on Nov 16 2017 1:08 AM
Sorry, we can only currently get these in 12 volt.
Answer By: Willys Jeep Parts Tech on Nov 16 2017 5:51 AM
Questions: How do you route the defrost? Do you have to cut holes in the dash or does it hang on the outside? Is there a vent for this purpose or do you have to make your own. I will be ordering one but need to plan so I can do whatever cutting I need to before paint, which is coming soon.
Question By: Elvis Hood on Jan 29 2017 8:41 PM
It really depends on the vehicle. Please call us toll free and we can try to help you. Thanks!
Answer By: Willys Jeep Parts Tech on Jan 30 2017 5:44 AM
Questions: Does heater have outlet for defrost
Question By: Mac on May 29 2015 12:00 AM
You can route one in with the kit.
Answer By: Willys Tech on Jun 1 2015 12:00 AM
Questions: You offer a heater that fits a 42 GPW but is a 12 volt . The 42 GPW is 6 volt. How does that work?
Question By: Frank on Apr 25 2015 12:00 AM
Sorry we only have these in 12 and 24 volt currently.
Answer By: Willys Tech on Apr 27 2015 12:00 AM
Questions: Do you have these in 24 volt?
Question By: mike on Mar 4 2015 12:00 AM
Yes, its part number: HEATER-24
Answer By: Willys Tech on Mar 4 2015 12:00 AM
Questions: Is there a product or installation manual available for this? If not, what else is required for installation? Does it just get connected as a loop in the coolant lines? Would be for a 48 CJ2A that was not set up with a heater...
Question By: Brian on Jan 22 2015 12:00 AM
Its pretty straight forward and is just a loop system. We can also fax you over the instructions if you need us to. Mike@kaiserwills.com email us your fax number there.
Answer By: Willys Tech on Jan 22 2015 12:00 AM
Questions: I have the original 6 volt system in my CJ-3A I see since 2010 the answer to the question of do you have a 6 volt heater has been... its in development. By 2013 you replied... hope next year. Well now 5 years , Do you have a heater that works with a 6 volt system? If not, do you think you ever will and if so, please be specific when it will be available. I really have been checking for years.
Question By: George on Jan 22 2015 12:00 AM
Sorry, our supplier has not yet come up with a 6 volt version for us.
Answer By: Willys Tech on Jan 22 2015 12:00 AM
For those people who want to put a 12v heater in a 6v jeep just add a resistor from 12v to 6v pretty simple to do.
Answer By: Ron on Mar 30 2017 3:14 PM
Questions: This has to be better than the original heater. Can you please send me the installation and wiring instructions so I can see what I will have to do to install this heater. I am assuming it is not a direct replacement and some modifications will be necessary. Thanks.
Question By: Robert on Jan 10 2015 12:00 AM
Please email firstname.lastname@example.org and we can fax you over some instructions.
Answer By: Willys Tech on Jan 12 2015 12:00 AM
Questions: I have a 52 Willy's Pickup. Has been converted and has a Chevy 350 in it. Will this unit adapt to this set up?
Question By: Anonymous on Jan 2 2015 12:00 AM
Yes, it should work just fine. Its an under dash and wont interfere.
Answer By: Willys Tech on Jan 2 2015 12:00 AM
Questions: Does this kit come with a on/off switch or is that something I need to buy separately .
Question By: Tack Neely on Dec 1 2014 12:00 AM
Yes it will have a switch with it.
Answer By: Willys Tech on Dec 2 2014 12:00 AM
Questions: I know this was asked in the past but didnt see new, is there a way to run this on 6V?
Question By: SSG.Monte on Nov 22 2014 12:00 AM
Sorry these are for 12 volt only.
Answer By: Willys Tech on Nov 24 2014 12:00 AM
you can add a resistor available at auto supply shops to drop 12 to 6 volt. I did this on an old jeep wagon when i converted it to 12V and kept original 6V heater motor. Did same for radio.
Answer By: Jack on May 2 2017 5:12 PM
you do not want to run a 12 volt electric motor on 6 volts. installing a resistor in a 6 volt system will drop voltage not step it up to 12 volts. you can replace the 12 volt motor with a 6 volt motor. just have to research the motor out. I would do it before you buy the kit.
Answer By: Rick on Jun 2 2018 1:24 AM
Questions: I have a 1954 willys pickup and need just a heater core where can I get one of these
Question By: Bradley on Oct 15 2014 12:00 AM
You will have to try a salvage yard or have yours reconditioned locally for that.
Answer By: Willys Tech on Oct 20 2014 12:00 AM
Questions: Looking at this heater I noted it had a 12 volt fan motor. My '49 CJ3A is only a 6 volt system. Do you make a kit to convert a 6 volt to 12 volt system? Larger brake kits too? Thanks so much.
Question By: Bob on Aug 8 2014 12:00 AM
We do sell alternator conversion kits, coils, hi-torque starters ect. Please call us toll free and we can quote you out.
Answer By: Willys Tech on Aug 11 2014 12:00 AM
Questions: I have a 1950 CJ-3A with factory heat and need a 12 volt electrical motor to fit in the place of the 6 volt motor, Do you have such a critter? Thanks Shawn
Question By: Shawn on May 23 2014 12:00 AM
This would be your best option. I dont believe that is something available.
Answer By: Willys Tech on May 27 2014 12:00 AM
Questions: Looking for replacement cable for heater, etc as well as dash parts for a 1968 cj5 and can't seem to find them on your site
Question By: Brad on Apr 24 2014 12:00 AM
The heater cables are a local item. Nobody reproduces those currently.
Answer By: Willys Tech on Apr 29 2014 12:00 AM
Questions: Have the 6volt heaters come out yet?
Question By: Ronald on Apr 17 2014 12:00 AM
Sorry not yet.
Answer By: Willys Tech on Apr 17 2014 12:00 AM
Questions: Will this 12 Volt model fit into a 1952 Willy's M38 A1 that has been converted from 24v to 12v? The other heater you have listed for our model Willy's is 24 volt.
Question By: Jim on Jul 16 2013 12:00 AM
Yes these will work for your 12 volt system. We also sell 24 volt ones too!
Answer By: Willys Tech on Jul 17 2013 12:00 AM
Questions: I see two boxes in the photo? Where do they go? Does the large one go in the engine compartment where the old heater box is? Small one?
Question By: steve on Jul 7 2013 12:00 AM
You can mount it about anywhere really. These will fit under the dash.
Answer By: Willys Tech on Jul 8 2013 12:00 AM
Questions: I have a 1964 jeep with 21,000 miles that i would like to do some work on. How do i tell exactly what model i have? Where can i find this info? Also it has a heater that is hooked up to the gas line near the carb. What type is this and are there parts available for it.---Thanks
Question By: Dexter on May 28 2013 12:00 AM
If its a Jeep then it is a CJ-3B or CJ-5 if its a 1964. Please look on our website in the about Willys section and all our customer photos section and you should be able to ID it. You can also call us toll free. We are more than happy to help.
Answer By: Willys Tech on May 29 2013 12:00 AM
Questions: Hello, you ship to Argentina? I can pay via PayPal? thanks
Question By: Esteban on Apr 5 2013 12:00 AM
Yes we ship daily UPS and USPS (post office) international.
Answer By: Willys Tech on Apr 5 2013 12:00 AM
Questions: looking for fresh air hose 4.5 dia. from radiator to heater for a 1958 willys jeep. also need 3 hose from heater to defroster
Question By: Anonymous on Feb 4 2013 12:00 AM
The part number is AIRDUCT4.5 on the hose. I do have some other hose sizes but not 3.
Answer By: Willys Tech on Feb 4 2013 12:00 AM
Questions: Am I correct in assuming the heater unit is two piece and one is mounted under the hood the other inside the vehicle? Also, will this work on a Jeepster?
Question By: Nevin on Jan 10 2013 12:00 AM
Is is all one unit. It will work with Jeepster as well.
Answer By: Willys Tech on Jan 10 2013 12:00 AM
Questions: Do you have the wiring instructions for this part?
Question By: Anonymous on Dec 27 2012 12:00 AM
Yes, it comes with complete wiring instructions. We are working on posting them online now.
Answer By: Willys Tech on Dec 28 2012 12:00 AM
Questions: I have a heater that was made by Hunter Mfg. The following appears on an attached metal tag. stock no. 2540 00 869 0424 model no. HW 20 2 serial No. 92200 Volts 28 Amps 6.5 What do I have, something of worth,or just a boat anchor? thanks Bob
Question By: Bob on Oct 27 2012 12:00 AM
That is a aftermarket heater. If you like take a photo and email it to us. I can take a look at it too.
Answer By: Willys Tech on Oct 29 2012 12:00 AM
Questions: I am looking for the fan motar on the heater under the driver side dash for my 47 CJ2A. the heater core is still good but the fan is broken and i have converted my jeep to 12 volts any ideas? thanks!
Question By: Cameron on Sep 6 2012 12:00 AM
You will have to match something locally up on that. This HEATER will do the trick for you too.
Answer By: Willys Tech on Sep 7 2012 12:00 AM
Questions: are the controls attached to the unit, or is the control wired to mount in dash ?
Question By: John on Aug 1 2012 12:00 AM
Typically people attach them to the dash.
Answer By: Willys Tech on Aug 2 2012 12:00 AM
Questions: I have a 1966CJ-5. Is the firewall available in the catalog good for the CJ-5?
Question By: George Cederberg on Jun 28 2012 12:00 AM
We can probabaly get good used on the firewall.
Answer By: Willys Tech on Jun 29 2012 12:00 AM
Questions: do you ship to australia postcode 5373 do you accept credit card over the phone???
Question By: alex on Jun 9 2012 12:00 AM
We do ship daily USPS and UPS international. You can always call us and we can help you over the phone too. Thanks!
Answer By: Willys Tech on Jun 11 2012 12:00 AM
Questions: would two heaters be too much heat!
Question By: Anonymous on Mar 30 2012 12:00 AM
One should be plenty :)
Answer By: Willys Tech on Mar 30 2012 12:00 AM
Questions: Is this heater electic or does it require water hose from the engine
Question By: Hoss on Feb 3 2012 12:00 AM
It is hydronic.
Answer By: Willys Tech on Feb 3 2012 12:00 AM
Questions: Q:does this heater work off of the coolant system or does it work off of just electric?
Question By: Anonymous on Dec 12 2011 12:00 AM
It is hydronic so coolant.
Answer By: Willys Tech on Dec 12 2011 12:00 AM
Questions: The heater information states one ducted unit can heat driver and passenger and the other can be used as a defroster. Does it come with both? Or do you have to purchase a second unit?
Question By: Ray McMurphy on Dec 9 2011 12:00 AM
You can route it either way.
Answer By: Willys Tech on Dec 9 2011 12:00 AM
Questions: Can you tell me if the front pulley on an L6-226 is a vibration damper or a harmonic balancer?Or is this covered in the shop manuel?Thank you.
Question By: Jerry on Dec 1 2011 12:00 AM
It is a bit of both. Its covered in the shop manuals we sell as well.
Answer By: Willys Tech on Dec 2 2011 12:00 AM
Questions: Does it come with a heater control valve? It can be adaped to other vehicles?
Question By: STEVE on Oct 27 2011 12:00 AM
If you want a separate on/off valve for summer you just have to line it in. It can be used on about anything.
Answer By: Willys Tech on Oct 28 2011 12:00 AM
Questions: Does the heater fit up under the dash out of sight. My 1942 MB has a glove box so it can't go up above the passengers feet like it could on a CJ2a that has not glove box. Just exactly where does it fit?
Question By: Brad on Oct 27 2011 12:00 AM
It is barely visible under the dash when mounted up high. You can really put it up just about anywhere center to passenger side.
Answer By: Willys Tech on Oct 28 2011 12:00 AM
Questions: Can the heater operate like a fan for the summer time?
Question By: Smitty on Oct 13 2011 12:00 AM
Im sure it could.
Answer By: Willys Tech on Oct 13 2011 12:00 AM
Questions: DOES THIS HEATER FIT INTO THE SPACE WHERE THE ORIGINAL ONE WAS? ARE THE CONNECTIONS SIMILAR TO THE OLD ONES EVEN IF THEY NEED NEW HOLES?
Question By: PETE on Nov 22 2010 12:00 AM
Yes, it fits great under the dash and it is a simple heater hose connection.
Answer By: Willys Tech on Nov 22 2010 12:00 AM
Questions: I have an M38A1 with 24 volt system. Do you have this in 24 volt and what is the difference in price if any?
Question By: Peter on Oct 18 2010 12:00 AM
Yes, we have them. They are the same price. Please call me toll free: 888-648-4923.
Answer By: Willys Tech on Oct 19 2010 12:00 AM