Questions & Answers
Questions: Is the paint designed to be put on the vehicle with just a roll brush or is it designed for a spray gun?
Question By: Killian on Apr 9 2018 9:29 PM
It can be done for either. Thanks
Answer By: Willys Jeep Parts Tech on Apr 10 2018 7:35 AM
Questions: Is this enough to cover a CJ-2a ?
Question By: Dalton W Peck on Jan 12 2017 4:15 PM
Yes, this will be enough as described above.
Answer By: Willys Jeep Parts Tech on Jan 13 2017 5:41 AM
Questions: I need to paint the chassis of a 1955 CJ5, I media blasted it already and removed the rust. Do I need to use a primer before applying this paint to the chassis, if so, what type of primer do you recommend? Do I need a paint spray gun, if so, what type of spray gun do I need? or can I apply it with roller? Thanks in advance for your help!!
Question By: Xavier on Jun 25 2016 2:23 PM
We typically use a good Rustoleum paint. Some people will even use a roll on bed liner material.
Answer By: Willys Jeep Parts Tech on Jun 27 2016 5:46 AM
Questions: I have a 48 CJ2A in need of body paint. Local paint shops want $3500 - $5000 for a flat olive drab paint. I'm not looking for an auto show paomt job, just a basic protection. One says I need to sand blast it first and apply primer to entire body. Another says I only need to sand out rust spots and lightly sand out old paint first. Same price for both. Do I need to take body down to bare metal first? Can you recommend a good primer paint?
Question By: Daniel Baldwin on Jun 1 2016 2:37 PM
That sounds high to me. Send me over some pictures of your vehicle and I can try to help.
Answer By: Willys tech on Jun 1 2016 8:39 AM
Questions: How much do I need for a cj5 body?
Question By: Miles T on May 29 2015 12:00 AM
Typically I recommend at least a gallon. Maybe more for multiple coats.
Answer By: Willys Tech on Jun 1 2015 12:00 AM
Questions: is it possible to send in canada
Question By: Anonymous on Dec 29 2014 12:00 AM
Because it is technically hazardous materials it can only be sent UPS ground in the 48 states.
Answer By: Willys Tech on Dec 30 2014 12:00 AM
Questions: how much paint would you need for the body of a 53 Willys truck
Question By: Anonymous on Jul 25 2014 12:00 AM
If you were doing just the body i would say 2 gallons should cover it.
Answer By: Willys Tech on Jul 28 2014 12:00 AM
Questions: What surface prep is needed and do I need to prime or is this a all in one product, also will it work on componants , engine , trans, thanks Tim
Question By: Tim on May 15 2014 12:00 AM
You will want to use a good automotive primer for sure. It can be used on both body and chassis.
Answer By: Willys Tech on May 15 2014 12:00 AM
Questions: IS THIS THE SAME SHADE USED IN WW2?
Question By: Anonymous on Apr 23 2014 12:00 AM
Yes that is right. It is period correct.
Answer By: Willys Tech on Apr 23 2014 12:00 AM