Questions & Answers
Questions: 47' Willys with the metal bottom of seat rusted out on drivers side. When replacing metal bottom and then order seat cushion with or without plywood bottom
Question By: Randy Kyle on May 31 2020 3:01 PM
If you have a metal pan with upholstery hooks we can do a seat cover and cushions with a draw string. Or if you want to get away from the metal pan and not use one then we do a complete set up with plywood pan all stapled and ready to go with cage nuts to bolt to the frame itself.
Answer By: Willys Jeep Parts Tech on Jun 1 2020 5:52 AM
Questions: Are these waterproof?
Question By: Chris on May 7 2019 4:21 PM
I would treat them with a spray waterproofing.
Answer By: Willys Jeep Parts Tech on May 7 2019 10:29 AM
Questions: Is it possible to get the covers only without the foam or seat plywood pan.
Question By: Ray Bickerstaff on Aug 23 2018 11:26 PM
We can do this. Call toll free and ask for Mike M.
Answer By: Willys Jeep Parts Tech on Aug 24 2018 5:34 AM
Questions: I see that you typically use a 3" foam for the CJ2A front seat bottoms. Would it be possible to get a 2" thick foam front seat bottom (cover and cushion)? This would allow for just a little more room. Thanks.
Question By: Tim on Aug 14 2018 10:05 PM
Yes, we can do that. Please call us toll free and we can accommodate.
Answer By: Willys Jeep Parts Tech on Aug 15 2018 5:53 AM
Questions: What kknd of material is the cover made of?
Question By: David Vend on May 8 2018 8:49 AM
We can do these in either original canvas or a vinyl material in a number of colors. See the drop down box for choices.
Answer By: Willys Jeep Parts Tech on May 8 2018 6:22 AM
Questions: Does the plywood just slide inside the cushion? What are the plywood dimensions for CJ2A SEATS
Question By: Jim Pelzel on Jan 10 2018 12:21 AM
The cushion is staped to the bottom of the painted plywood pan. Cage nuts are also put in the plywood for the install to seal. The plywood pan measures 15.5 x 18" and 3/4" thick marine grade plywood.
Answer By: Willys Jeep Parts Tech on Jan 10 2018 8:51 AM
Questions: Will this fit the two front seats in a 1959 CJ-5? Also, I have the same question for the top seat cover & cushion.
Question By: Kevin Hobert on Oct 31 2017 11:35 PM
We can do seat covers and cushions for your CJ-5. We need some pictures of your frames. Please email firstname.lastname@example.org and we can help you.
Answer By: Willys Jeep Parts Tech on Nov 1 2017 5:45 AM
Questions: Will this fit a 61 cj 3b
Question By: Anonymous on Jun 25 2012 12:00 AM
Yes that is correct. We custom make them to your vehicle.
Answer By: Willys Tech on Jun 25 2012 12:00 AM
Questions: Will this seat cushion fit a 1948 CJ3A Willys?
Question By: Steve on May 13 2012 12:00 AM
Yes this is the one you need.
Answer By: Willys Tech on May 14 2012 12:00 AM
Questions: does the seat bottom have a metal replacement piece for the rusted out original?
Question By: Anonymous on May 5 2012 12:00 AM
They originally used a plywood pan on the bottom. We sell these with and withought the pan.
Answer By: Willys Tech on May 7 2012 12:00 AM
Questions: Does this cushion have a flap that would be folded over the plywood for ease of attachement to the plywood.
Question By: Anonymous on Jul 24 2011 12:00 AM
Yes the fold over the seat frame tube for install just like original.
Answer By: Willys Tech on Jul 25 2011 12:00 AM
Questions: How thick is the cushion?
Question By: Jay Soule on May 11 2016 1:49 PM
We typically do them in a low profie at approx. 3" so people can fit under steering wheel easier. Or we can also do it in the hi-profile at 6" if you like too.
Answer By: Willys Tech on May 11 2016 9:47 AM
Questions: Can you provide instructions for installation of the bottom (w/o plywood) and top front seat covers I purchased for my 1950 CJ3A from you.
Question By: William Allen on Apr 26 2016 12:49 PM
Yes, we have a set of instructions we can email or fax over to you. Please email email@example.com and I can help you. Thanks!
Answer By: Willys Tech on Apr 27 2016 8:43 AM