Questions & Answers
The early CJ5s must have had some kind of rear seat option but I have never seen one. Will this fit a 61 CJ5. If not can it be modified to fit in some way?
Willys Jeep Parts Tech:
Yes, if I had a early CJ-5 this is what i would go with and just bump up the back a bit and mount the front legs. its the closest available that would be easier to change a bit to install.
Yes, if I had a early CJ-5 this is what i would go with and just bump up the back a bit and mount the front legs. its the closest available that would be easier to change a bit to install.
How do the front legs actually attach to the tub?
Willys Jeep Parts Tech:
They slide under the slots in your floor board.
They slide under the slots in your floor board.
What seat cushions are recommended for this frame?
Willys Jeep Parts Tech:
We have alot of options on colors and materials. Call us toll free. Happy to help out.
We have alot of options on colors and materials. Call us toll free. Happy to help out.
Hi, I have a 1955 Jeep Willys CJ. Will this seat work?
Willys Jeep Parts Tech:
Yes especially if you have a CJ-3B. It would be a direct fit. If a CJ-5 then some modification is required.
Yes especially if you have a CJ-3B. It would be a direct fit. If a CJ-5 then some modification is required.
Will this rear seat frame fit on a 1966 CJ-3B?
Willys Jeep Parts Tech:
Yes, dimensionally they would fit back there.
Yes, dimensionally they would fit back there.
Will this frame fit a 65 CJ5
Willys Jeep Parts Tech:
With some modification it would.
With some modification it would.
Will this fit a 1964 DJ3A Surrey Gala?
Willys Jeep Parts Tech:
This should work for you with some modification. It will fit down in the wheel wells.
This should work for you with some modification. It will fit down in the wheel wells.
I have the metal rear seat and new cushions/vinyl black covers. Can you tell me the proper procedure to fasten the cushions on to the seat?
Willys Jeep Parts Tech:
https://www.kaiserwillys.com/media/wysiwyg/Seat-Covers_Cushions.pdf See link to help. And you can email mike@kaiserwillys.com too with questions.
https://www.kaiserwillys.com/media/wysiwyg/Seat-Covers_Cushions.pdf See link to help. And you can email mike@kaiserwillys.com too with questions.
We have a 53 CJ-3B and are looking to put this rear seat in but we currently have a roll bar which is not original. Can you supply the measurements so I can see if it fits?
Willys Tech:
This wont effect your roll bar up on your wheel wells. It fits down between them.
This wont effect your roll bar up on your wheel wells. It fits down between them.
I like the wider back on this seat. Will this work in my 48 CJ2A ?
Willys Jeep Parts Tech:
Yes, it mounts up exactly the same.
Yes, it mounts up exactly the same.
What are the measurements? Thank you
Willys Jeep Parts Tech:
Please email mike@kaiserwillys.com what kind of measurements your needing and we can help.
Please email mike@kaiserwillys.com what kind of measurements your needing and we can help.
Does seat back fold down?
Willys Jeep Parts Tech:
No, the CJ-3A rear seat frame didn't originally. The M38 one does though.
No, the CJ-3A rear seat frame didn't originally. The M38 one does though.
what is the part number for the 2 hold down loops for the front legs. I have a new replacement body that didn't come with them. And part number for the rear legs. Please. cj3a
Willys Jeep Parts Tech:
The front legs slide into the slots that are part of the rear floor board. There are no loops per se. The rear post use part number: REARBRKT
The front legs slide into the slots that are part of the rear floor board. There are no loops per se. The rear post use part number: REARBRKT
Will this seat fit in a 1962 cj5?
Willys Jeep Parts Tech:
It will fit between the wheel wells but you will have to modify to secure.
It will fit between the wheel wells but you will have to modify to secure.
Can you order this seat with cushions and cover installed?
Willys Jeep Parts Tech:
Sorry, that has to be done locally.
Sorry, that has to be done locally.
Which seat belts will work with this seat?
Willys Jeep Parts Tech:
BELT-1 or BELT-6 are good options.
BELT-1 or BELT-6 are good options.
Will the long back seat work in a '48 CJ2A? My clips are intact, and I'd like to use them, but with a long back seat if possible.
Willys Jeep Parts Tech:
This will work just fine. The only real difference is the tall UPPER back at 15" metal pan vs. the CJ-2A which had a 6" tall metal pan.
This will work just fine. The only real difference is the tall UPPER back at 15" metal pan vs. the CJ-2A which had a 6" tall metal pan.
I have a 69 CJ-5. Will this frame work for it or is their a better choice?
Willys Jeep Parts Tech:
It will fit in the back but you wont have the cut outs in the floor board for the front and rear supports. Im sure it could be made to work though...
It will fit in the back but you wont have the cut outs in the floor board for the front and rear supports. Im sure it could be made to work though...
Hi, I want to know if this seat frame will fit my Tender 1965 Willys. can you email me so i'll send you a picture of the veichle Thanks, Yoad
Willys Jeep Parts Tech:
Please email mike@kaiserwillys.com and I can take a look at your vehicle.
Please email mike@kaiserwillys.com and I can take a look at your vehicle.
Do you have seat cushions for this seat frame?
Willys Jeep Parts Tech:
Yes, we have them: http://www.kaiserwillys.com/category/canvas/seat-covers-cushions Filter by your vehicle then. Call us toll free we are happy to help too.
Yes, we have them: http://www.kaiserwillys.com/category/canvas/seat-covers-cushions Filter by your vehicle then. Call us toll free we are happy to help too.
Does this seat frame for the 3A have the tall seat back?
Willys Tech:
Yes, these are tall back currently.
Yes, these are tall back currently.
I have a 1958 willys truck but have no idea which frame to use and was wondering if this one will fit
Willys Tech:
The Willys Truck is totally different. We can get you a cover or a good used bench seat if you need us to.
The Willys Truck is totally different. We can get you a cover or a good used bench seat if you need us to.
Is there a rear seat for a 1963 CJ-5A or can another frame be used?
Willys Tech:
This one could be used. It will be the closest thing available.
This one could be used. It will be the closest thing available.
Will this fit in a 52 M38?
Willys Tech:
Yes it will fit between the wheel wells but the M38 takes part number: A2782-38.
Yes it will fit between the wheel wells but the M38 takes part number: A2782-38.
If I wanted a bench style seat in the front rather in the back, would I be able to mount this in the existing holes where the driver/passenger seats are?
Willys Tech:
Im sure anything is possible but you would have to drill to mount this in the front area.
Im sure anything is possible but you would have to drill to mount this in the front area.
Can this back seat fit a CJ-5? If not which one can? or is'nt there any available?
Willys Tech:
This should fit into the back of a CJ-5 just fine.
This should fit into the back of a CJ-5 just fine.
Can you tell me what driver, passanger and rear frames will fit my 1955 M38A1? I can seem to match up the numbers. Thanks
Willys Tech:
We can help out. Please call us toll free.
We can help out. Please call us toll free.
Does the seat sit on the floor of the jeep or does it have legs?
Willys Tech:
There are small legs but it is very close to the floor just like original.
There are small legs but it is very close to the floor just like original.
Can you send me a list of what mounting hardware I will need to order to install the A2782-3A rear seat frame.
Willys Tech:
All you need is part number: REARBRKT qty 2
All you need is part number: REARBRKT qty 2
YOU MIGHT ALSO BE INTERESTED IN
