Questions & Answers
Questions: Can I buy only the wiring set without the horn button and nut?
Question By: dave on Jan 17 2019 3:38 PM
Sorry, it only comes as a kit.
Answer By: Willys Jeep Parts Tech on Jan 17 2019 10:39 AM
Questions: Where does the wire come out of the steering column on a '61 CJ-3B? The "button" and wire were missing from mine when I got the Willys. When I push the wire down the center of the steering column, it binds when about 90% of the way in, and is covered with grease when I pull it back out.
Question By: Ellis Johnson on Nov 12 2018 2:12 PM
The wire on a CJ-3B come out the bottom of the steering gear box itself. It goes the worm gear into the bottom guide and out to horn.
Answer By: Willys Jeep Parts Tech on Nov 12 2018 10:15 AM
Questions: Hi do you sell just the nut or only the complete kit?
Question By: Jason Renshaw on Mar 20 2018 9:19 AM
Sorry, we only get these in as a kit for the Willys MB.
Answer By: Willys Jeep Parts Tech on Mar 20 2018 6:22 AM
Questions: I have a CJ2A but I've cloned to an MB and have the 17" MB wire wheel. Will this kit work? Or do I need the other one for the CJ2A?
Question By: Andrew Jones on Oct 17 2016 2:15 AM
The A6742 will work just fine for you.
Answer By: Willys Jeep Parts Tech on Oct 17 2016 5:57 AM
Questions: Did this switch go in the steering wheel in the MB too? Could it be installed in the dash too? Does it work for siren as well or would that be a different switch?
Question By: SEBASTIAN on Apr 2 2015 12:00 AM
This is for the MB/GPW on your steering wheel like original. If you have a siren that would be something separate.
Answer By: Willys Tech on Apr 3 2015 12:00 AM
Questions: Hi-I bought the master horn repair kit, but when I inspect my steering column and box, there is neither a hole in the bottom plate for the wire to come out, nor can I find a place on the column where a wiper contact is located?? Box and column appear stock and I can see a wire that has been cut-off when I look down the steering shaft with a flashlight from the steering wheel end. Where is the normal location for the wiper bushing hole in the column? If I pull on the wire should it come out?
Question By: Jeff D on Feb 16 2012 12:00 AM
The wire on this should come out above the gear box thru a hole and you use part numbers: A302 & A302B
Answer By: Willys Tech on Feb 16 2012 12:00 AM
Questions: Does the horn repair kit work with 12 volt?
Question By: Anonymous on Feb 25 2011 12:00 AM
Yes, it should work fine.
Answer By: Willys Tech on Feb 28 2011 12:00 AM