Questions & Answers
Questions: I see in answer below two of Bushing Dimensions are; ID .56 x OD .75 -inches what is the length? Looking for 9/16 x 3/4 x 1-3/4 inch Bushing, Need 6-each. Thanks.
Question By: Bill on Aug 30 2018 1:00 AM
Answer By: Willys Jeep Parts Tech on Aug 30 2018 5:36 AM
Questions: Do you have these bushings for 1947 2wd station wagon with only one leaf spring from side to side?
Question By: Anonymous on May 21 2013 12:00 AM
The front bushings for the planar suspension 2x4 Willys Station Wagon and Jeepster is part number: 646081
Answer By: Willys Tech on May 22 2013 12:00 AM
Questions: I have a 59 4wd wagon and I need to know what bushing goes in the front end rear shackle I know the brass bushing is in the front but it looks like a rubber bushing is on the rear.
Question By: David on May 21 2013 12:00 AM
You are looking for part number: 804466 for the rear on the Willys Station wagon.
Answer By: Willys Tech on May 21 2013 12:00 AM
Questions: Will these work on 2wd?
Question By: Anonymous on Jun 23 2012 12:00 AM
2WD Willys Trucks and Station Wagons used different set up. This is for 4WD only.
Answer By: Willys Tech on Jun 25 2012 12:00 AM
Questions: How many will I need to do both springs on the front?
Question By: Raun Mawson on Feb 28 2012 12:00 AM
Quantity of 2
Answer By: Willys Tech on Feb 28 2012 12:00 AM
Questions: What is the OD and ID measurements, I need the pressed in bushing that goes into the shackle on a FC 170
Question By: GW on Dec 13 2011 12:00 AM
Approx .75 OD x .56 ID just like original.
Answer By: Willys Tech on Dec 15 2011 12:00 AM