Orders $200+ Qualify for a FREE Calendar. Enter FREECAL

FREE SHIPPING on all orders $98+ See Details

Select Your Currency
Close
  • Africa
  • Americas
  • Asia
  • Europe
  • Oceania
Shop Kaiser Willys

Transfer Case Assembly (for 1-1/4" shaft)
Fits 53-71 Jeep & Willys with D18 transfer case

Part # 937477-14

Transfer Case Assembly

SHIPS FOR FREE!!! $40.00 FREIGHT CHARGE WAIVED

Everything you need to completely redo your entire transfer case already assembled Kit includes all New gears, shafts, bearings, gaskets, seals, ect. Its complete and already assembled. Just drop it in! Its even assembled here in the USA!!! Original housings are used for proper stamping.

Helpful Guides and Illustrations:
Replacement Instructions

Application:
D18 transfer case

For 1-1/4" shaft

Note: Mainshaft gear sold separate if needed.

Fits:
53-64 CJ-3B
55-71 CJ-5
52-66 M38A1
53-64 Truck
53-64 Station Wagon

Please allow 5-6 weeks for delivery.

NOTE:
$300 FULLY REFUNDABLE CORE FEE WITH ITEM
-A fully prepaid return label will be included in the box.
-Just put your old COMPLETE transfer case assembly with all internals in the same box we send you and return your old core.
-As soon as we get it back we will refund you back the $300 core fee.
-Please make sure to package it properly to prevent damage.

Part # Price
937477-14

$1,495.00

MSRP:

$1,495.00

MSRP:

1 Item has been added to your cart!
Close

Product Videos

Questions & Answers

Please Wait...

Ask Question Add Answer

All questions will be displayed after moderation. All answers will be displayed after moderation.

D 18 Transfer case, PTO rear cover plate 5 hole with gasket, I removed the PTO unit, this plate is part of the transfer case. do you have one? 1966 cj5 v6

Willys Jeep Parts Tech:
You are looking for part numbers A1508 and A1509.

How can I know the D18 1-1/4" shaft you are selling is a large hole 4 inch?

Willys Jeep Parts Tech:
Not sure of your question. The 1 1/4 measurement is the OD of the intermediate shaft gear. You can see a video of how to identify that on our YouTube channel.

The pictures show 2 different types of rear output setups..?

Willys Jeep Parts Tech:
Just early and late. We match to your vehicle after you order we will contact you.

What is the shift pattern for this twin stick? Does it have a rear wheel neutral?

Willys Jeep Parts Tech:
See part number: DECAL-C5

Hi. Do you have the shift levers that go to this?

Willys Jeep Parts Tech:
A1500

I have a CJ2A, Has a 225 Buck Oddfire with a Muncie 420 transmission. Its adapted to a small bore 3/4 shaft Dana 18. My understanding is that the shaft diameter and bore size are different but they are practicly still the same transfer case. Is it possible to put this transfer case into my current set up without any issues?

Willys Jeep Parts Tech:
We would need to get some more specifics on what all you have going on. Please email mike@kaiserwillys.com to help.

Hi. I need transmission and Dana 18 transfer case for my 1966 jeep cj5. It has the v6 225 engine.

Willys Jeep Parts Tech:
Sure! We have both. You probabaly have a T86AA transmission in your CJ-5. Give us a call toll free. Ask for Mike M.

I HAVE A 1966 CJ5 WITH THE ORIGINAL V6 BUICK MOTOR 3.7. I INHERITED IT OFF MY BOTHER IN LAW THAT BOUGHT IT NEW.. I THINK IT CAME WITH A TWO STICK TRANSFER CASE?? ANYWAY IT HAS A SINGLE STICK THAT WORKS BUT IS LEAKING BAD ALL OVER THE E BRAKE DRUM . NEED THE COMPLETE GASKET SET WITH SEALS?? PLEASE ADVISE. THANKS A VALUED CUSTOMER

Willys Jeep Parts Tech:
923300 is the gasket set for your dana 18 transfer case.

Why does it matter what engine you have for the transfer case?

Willys Jeep Parts Tech:
Typically no as long as you are still using the original D18 transfer case.

Are the Dana 18 assemblies equipped with the rear yoke parking/emergency braking mounting hub? or would i need to swap it prior to sending back a core

Willys Jeep Parts Tech:
You would want to keep your old e-brake set up on your vehicle.

Is this the dual lever transfer case?

Willys Jeep Parts Tech:
Yes, that is correct. If you need single stick we can help with that too.

Mike I am restoring a 1965 CJ 5. I found a T 90 A-1 transmission with a Spicer G18-15-10-3 transfer case. Will this marry up to a 134 engine?

Willys Jeep Parts Tech:
Yes, it should. If you wanna send over some photos I can help too.

Will this transfer case work with later model 18 with a single Stick?

Willys Jeep Parts Tech:
We can work up a transfer case for your. Please call and ask for Mike M. Happy to help.

Item# 937477. Can this dana 18 transfer case be ordered for a v6 225? And is the core required? I do not have a case for the core. That is why I need a full assembly. Also can I order it with the shifter assembly as well?

Willys Jeep Parts Tech:
We can work this up for you. Please call us toll free and we can help out.

Is this a completely rebuilt transfer case? Is there any sort of guarantee? Does this also apply to the T-90 Transmission with 4-134 engine; Item 946109?

Willys Jeep Parts Tech:
yes, that is correct. They are completely rebuild and are for the T90 transmission 4-134 motor. They come with a 1 year warranty. We can also build them for the 6-226 and V6225 motors as well.
Request Catalog
X
THANK YOU! Your catalog request has been submitted successfully. Please note:

If your catalog does not arrive within 7-10 business days, call us Toll-Free at (888) 648-4923.

Email Subscription
X
THANK YOU! You have successfully subscribed to our newsletter.
Contact Form
X
THANK YOU! Your contact form request has been submitted successfully.
Photo Contest
X
SUCCESS! Your photo contest entry has been submitted!
Browser warning
The browser you are using to visit our website is no longer supported. For the best browsing experience, please visit us using a different browser.
I understand, close this message