Questions & Answers
Questions: Since it is 63", does the hood welt run along top of grille and end where the grille meets the fender or does it continue in between the grille and the fender past the head lights?
Question By: Wallace Ruiz on Jun 4 2019 1:05 AM
it will run all the way across the top surface of the grille. Approx 63" across. It was only used on the top of the grille where your pre-drilled holes are from the factory.
Answer By: Willys Jeep Parts Tech on Jun 4 2019 5:34 AM
Questions: I cant find this for a 73 cj5 anywhere. would this work?
Question By: mike cuthbertson on Apr 14 2019 6:11 AM
Yes, this would fit that application as long as the seal you need is about 63" long. Thanks
Answer By: Willys Jeep Parts Tech on Apr 15 2019 3:58 AM
Questions: Will this work for my '48 willys truck? Thanks
Question By: Dick Frazier on Jul 3 2018 5:20 PM
669210 is what i would go with for the Willys Truck.
Answer By: Willys Jeep Parts Tech on Jul 3 2018 10:20 AM
Questions: Do you have a special tool for fixing the rivets Mike?
Question By: Chris Bowman on Dec 6 2017 5:58 AM
We just use a need nose flat head screw driver to bend tabs over.
Answer By: Willys Jeep Parts Tech on Dec 6 2017 5:59 AM
Questions: Rivets seem short do they bend over the edge underneath or do they some how bend within the hole. I've got original grill and the rivets don't poke thru to other side. Any help would be helpful. Thanks
Question By: Anonymous on Feb 6 2015 12:00 AM
They are the correct length. They must be pressed down hard then the fork bent over to either side.
Answer By: Willys Tech on Feb 9 2015 12:00 AM
Questions: I have 72 cj5 the welt looks the same don't have rivets it has clips.do you sell just the welt? all my clips look good
Question By: Dave on Jan 10 2015 12:00 AM
We can get you just welting. Please call us toll free.
Answer By: Willys Tech on Jan 12 2015 12:00 AM
Questions: Ok..feel silly but, just got the welting strip for my 46 CJ-2A? How do I make the small rivets work? Very little room under there. Special tool?
Question By: Greg on Sep 14 2014 12:00 AM
RT900 is the part number you need.
Answer By: Willys Tech on Sep 15 2014 12:00 AM
Questions: I have a 1965 Willys CJ5 and need the seal that goes over the grille and sits between the grill and the hood. What part number? Is it 663520?
Question By: brett on Mar 28 2014 12:00 AM
Yes this is the proper part number for you.
Answer By: Willys Tech on Mar 31 2014 12:00 AM
Questions: what material is this welting made of?
Question By: jerrt on Jun 29 2013 12:00 AM
It is a coated canvas material like original.
Answer By: Willys Tech on Jul 1 2013 12:00 AM
Questions: I have a Ford GPW, 1942, I need the rubber weather strip that goes along the side and top of the radiator. I have the side pieces, but the top one is missing. It is about a one inch wide strip of bubber attacint to the frame to close the gap between the radiater and the grill frame. It attaches with screws or rivits?
Question By: doug on Mar 24 2013 12:00 AM
2A1732 is the part number you need. People usually go back with screws because it is easier.
Answer By: Willys Tech on Mar 25 2013 12:00 AM
Questions: I have a 1970 CJ-5. Will this kit work?
Question By: Anonymous on Mar 11 2013 12:00 AM
Yes this will be the proper one for you. They used it thru 1971.
Answer By: Willys Tech on Mar 12 2013 12:00 AM
Questions: hood welt for a 1970 jeepster commando?
Question By: dan on Feb 19 2013 12:00 AM
This will work for that vehicle as well.
Answer By: Willys Tech on Feb 20 2013 12:00 AM
Questions: I have a 67 cj5 What hood welt kit do I need?
Question By: Jeff on Jun 6 2012 12:00 AM
This is the proper one. It goes thru 1971.
Answer By: Willys Tech on Jun 6 2012 12:00 AM
Questions: Would this welt kit fit a 1970 CJ5-225-V6?
Question By: Jesus M Gonzalez on Feb 10 2012 12:00 AM
Yes this will be correct.
Answer By: Willys Tech on Feb 10 2012 12:00 AM