Questions & Answers
Questions: I have a t-93 with 1 1/8 inch output shaft 10 spline with a 10 inch clutch need the replacement part number. for clutch disc and or clutch pressure plate kit (hooked up to a ford 302) in 1959 willys truck. Thanks Jeff
Question By: jeff brown on Mar 12 2020 2:15 AM
Assuming they are still using a Willys clutch on your set up the part number would be: 930602K
Answer By: Willys Jeep Parts Tech on Mar 12 2020 6:23 AM
Questions: Is this for a 1 & 1/16" or 1 & 1/8" 10-spline transmission shaft?
Question By: Matt on Oct 8 2018 6:19 PM
1-1/8" like original.
Answer By: Willys Jeep Parts Tech on Oct 9 2018 5:58 AM
Questions: Will this 10 in disc fit on a ford 302 engine? The gearbox are cj2a 1947 Are the measure 1 1/16 in - 10 spline 10 in Disc ?
Question By: Frank Berentsen on Nov 10 2016 4:33 AM
This will not work with a Ford 302 unless the original flywheel from the 4-134 engine is mounted to it which is doubtful.
Answer By: Willys Jeep Parts Tech on Nov 10 2016 5:46 AM
Most ford V-8 engines in the 60's used a 10" disc with a 1 1/16" 10 spline.
Answer By: Jim Miller on Oct 25 2017 8:55 PM
Questions: Is there a specific side that faces the flywheel, or can this disc face either direction?
Question By: Jared Sostrom on Jun 8 2016 8:52 PM
It will only go one way due to the center hub that protrudes on one side away from the flywheel.
Answer By: Willys Jeep Parts Tech on Jun 9 2016 6:04 AM
Questions: Is this friction 1.25 shaft?
Question By: Erik on Jul 10 2012 12:00 AM
Yes it is the direct replacement for the original friction disct used in the 54-64 Willys Truck and Station Wagon with the 6-226.
Answer By: Willys Tech on Jul 11 2012 12:00 AM