Questions & Answers
Questions: Which side is towards the flywheel?
Question By: sean j page on Nov 14 2020 11:33 PM
It only mounts one way. The protruding hub goes away from so it mounts flush.
Answer By: Willys Jeep Parts Tech on Nov 16 2020 5:28 AM
Questions: What is the spline diameter of this? Will it fit the T98 imput shaft which is 15/16"?
Question By: Mike on Feb 21 2019 7:00 PM
Yes, it will work. Both the T98a and the T90 transmissions they used in the 1965 jeep used a 15/16" 10 spline input shaft.
Answer By: Admin on Feb 22 2019 5:51 AM
Questions: How thick is this disc if you measure it as new with a set of calipers?
Question By: Anonymous on Feb 4 2013 12:00 AM
.4 like original
Answer By: Willys Tech on Feb 4 2013 12:00 AM
Questions: can you tell me the width of the friction disc, just the part that contacts the pressure plate and flywheel....thanks.
Question By: Anonymous on May 27 2012 12:00 AM
This is a 8.5 friction disc.
Answer By: Willys Tech on May 29 2012 12:00 AM
The width of the disc that contacts the pressure plate and fly wheel measures 8 inches and 1/4 of an inch.
Answer By: Tom cooke on Apr 15 2021 9:46 PM
Questions: dose it have 10 splines? Does it fit the original main drive gear?
Question By: Red on Sep 10 2011 12:00 AM
Yes that is correct. This is just like origninal.
Answer By: Willys Tech on Sep 12 2011 12:00 AM
Questions: does this work on my truck 1963 willys 4-134 item #930731 ? thank you
Question By: Ariel Guinazu on May 18 2016 10:41 PM
Yes, as long as you have the 4-134 engine with the 8.5" friction disc.
Answer By: Willys Tech on May 19 2016 6:05 AM