Questions & Answers
Questions: I have a 1948 jeep that has been converted to a Buick v-6, 3.8. I had to buy a pilot bearing that matched my V-6 crankshaft dia so I will have to machine the ID to fit the Jeep T-90 transmission. I need to know the machining spec for the ID of this pilot so that I can accurately machine the Bushing to fit the T-90 transmission. I can't use just 5/8". That is to open of a tolerance.
Question By: Greg Tyler on Aug 25 2018 3:52 PM
OD: 1" ID: 5/8"
Answer By: Willys Jeep Parts Tech on Aug 27 2018 5:57 AM
Questions: I have a Willys MB 1945, however I'm not sure about the flywheel. The bushing I've pulled out measures roughly 5/8 ID x 1.05 OD x 1/2 L.
Question By: James on Aug 19 2018 1:05 AM
OD: 1" ID: 5/8"
Answer By: Willys Jeep Parts Tech on Aug 21 2018 5:57 AM
Questions: i own a 69 cj5 with a f134. i ordered this part. it doesnt fit into the flywheel, its too big. i have a 9.25 friction disc, not the 8.5. where can i get the correct pilot bearing?
Question By: Anonymous on May 29 2013 12:00 AM
This is 100% the correct pilot bushing for the 4-134 engine with the T90 transmission. Please call us toll free. We can hopefully ID what you have in your vehicle and get you fixed up.
Answer By: Willys Tech on Jun 3 2013 12:00 AM
Questions: i have in my shop 1945 willys that owner tore the cluch out of im looking for this part and flywheel ring gear engine to best of my knowage is 2.2 flat head will this poilt bushing fit this engine ??
Question By: Anonymous on Oct 12 2012 12:00 AM
Yes that is the 4-134 L head engine.
Answer By: Willys Tech on Oct 15 2012 12:00 AM
Questions: i have a 69 cj5 with a 9.25 clutch. i believe is a f- 134 hurricane in it. is this the correct pilot bushing? another bushing you listed states its for cj5's with the same year.
Question By: ty on Oct 9 2012 12:00 AM
Yes as long as you have the 4-134 engine it will be correct.
Answer By: Willys Tech on Oct 10 2012 12:00 AM