Questions & Answers
Questions: What is the gauge and makeup of the wire in the HARNESS-08 kit? Also, does the kit include wires for the add-on turn signal?
Question By: Russ Meyer on Sep 21 2020 7:06 PM
The wire is between 12-16 gauge depending on location of wire. Yes, it will have a provision for you to wire your turn signal kit wiring to it.
Answer By: Willys Jeep Parts Tech on Sep 21 2020 12:14 PM
Questions: I happen to have a wire harness for a 52-64 williys wagon Harness 08 . things changed and i did not use it. i am dong a 60 cj5 can i use this harness on the cj5 without to many modifications
Question By: bernie on Jul 14 2020 4:21 PM
They are not the same harness in lengths and pre-terminations. But you could modify it fit in most areas Im sure.
Answer By: Willys Jeep Parts Tech on Jul 14 2020 10:01 AM
Questions: My 1963 Willys Station Wagon has a transplant GM V6 engine. Does the wiring harness work with that transplant engine?
Question By: James Himmes on May 27 2017 9:05 PM
The harnesses are made to factory spec all pre termined like original. You may just have to change out an end connection or two to set up for the motor.
Answer By: Willys Jeep Parts Tech on May 30 2017 5:27 AM
Questions: Is it possible to get just the wire by wire instructions?
Question By: Chase on Apr 19 2017 4:34 PM
They are specific to our harnesses. We are happy to answer any specific questions though. Please email email@example.com
Answer By: Willys Jeep Parts Tech on Apr 19 2017 10:18 AM
Questions: can I change from a 6volt system to a 12 volt system? will the current hardware work and just change the bulbs to 12 volt. does it affect the distributor or starter? I am aware that I will replace the generator with an alternator.
Question By: gregg on Sep 12 2014 12:00 AM
You will want to get part number: ALT12V and our 12 volt coil. The starter will be ok for a while but will eventually burn out. We have new 12 volt hi-torque starters too. The distributor will be fine.
Answer By: Willys Tech on Sep 12 2014 12:00 AM
Questions: Does the harness include the horn wire through the steering column
Question By: scott on Jan 8 2013 12:00 AM
Yes it will have the wiring there.
Answer By: Willys Tech on Jan 9 2013 12:00 AM
Questions: Can this harness be installed without taking apart the vehicle?
Question By: Bill on Aug 1 2012 12:00 AM
There is no need to take apart anything. Just run the wiring.
Answer By: Willys Tech on Aug 2 2012 12:00 AM