Product Videos
Questions & Answers
Sort By:
Questions: If you are switching to a 12 volt system will this wiring set up still work?
Question By: Mike Steele on Oct 23 2021 9:27 PM
Yes, that is correct.
Answer By: Willys Jeep Parts Tech on Oct 25 2021 5:40 AM
Questions: The prior owner of my 53 pickup re-wired using a K-W harness but without turn signals can I buy the turn signal harness separately, or a wiring diagram so that I can identify the color codes to wire my turn signal switch?
Question By: Joe Huld on Mar 19 2020 12:09 AM
Our harness would have been prewired for the turn signals. You probably just need a turn signal switch and flasher/socket to complete. Please email mike@kaiserwillys.com Happy to help. Thanks!
Answer By: Willys Jeep Parts Tech on Mar 19 2020 5:51 AM
Questions: Hi, will HARNESS-06 fit a 58 Willys Truck RHD L-134 eng, Australian model.
thanks
Question By: Laurie Berti on Aug 14 2018 5:15 AM
Please email mike@Kaiserwillys.com. I imagine you have a RH drive vehicle.
Answer By: Willys Jeep Parts Tech on Aug 14 2018 5:51 AM
Questions: Hi,does it fits 1962 willys pickup truck tornado engine?
Question By: Sagit on Mar 11 2018 7:44 PM
Yes it will. Just note the engine in the comment section. Thanks
Answer By: Willys Jeep Parts Tech on Mar 12 2018 1:02 PM
Questions: I have a 1952 willys pickup, with a v6 buick oddfire 1975 engine in it. Would this work?
Question By: Cierra Cox on Sep 29 2017 8:08 PM
Yes, this would work for you. You may have to change out a few end connections given the unoriginal motor is all.
Answer By: Willys Jeep Parts Tech on Oct 2 2017 5:43 AM
Questions: Any reason why this wont work with a right hand drive model
Question By: Col on Jun 13 2017 11:20 AM
It is for a LH drive but I'm sure you could get to work by swapping around some wires.
Answer By: Willys Jeep Parts Tech on Jun 13 2017 6:08 AM
Questions: how many circuits are there in this harness,,trying to retro fit
Question By: pam on Jun 3 2017 1:14 PM
They don't use circuit breakers or fuses originally.
Answer By: Willys Jeep Parts Tech on Jun 5 2017 5:39 AM
Questions: Does this kit include fuse panel and relays?
Thanks
Question By: Randy Stewart on Aug 23 2016 3:21 PM
They never originally used a fuse panel.
Answer By: Willys Jeep Parts Tech on Aug 23 2016 9:41 AM
Questions: I purchased a wiring harness for a 52 truck. The harness comes with replacement wires for the front turn signals. My question is how do I remove the wires from the bakelite socket fitting and get the new wires into it?
Question By: jim smith on Aug 18 2016 8:48 PM
You will need to pull them thru and sauder in the new ones.
Answer By: Willys Jeep Parts Tech on Aug 22 2016 5:58 AM
Questions: is this wiring harness set up for 12v system
Question By: keven kuebler on Jul 25 2016 2:53 PM
Yes, they work on both 6 or 12 volt. We custom make them to each vehicle.
Answer By: Willys Jeep parts tech on Jul 25 2016 9:40 AM
Questions: I will be converting my truck from 6V to 12V system (probably with your alternator). Will your 12V harness have resistors so I can use my original gauges?
Question By: Thomas Schroeder on Jun 20 2016 5:57 PM
If you need resistors you would have to pick them up locally.
Answer By: Willys Jeep Parts Tech on Jun 20 2016 11:13 AM
Questions: wiring harness is for 55 pickup with 6 cylinder engine and has turn signals
Question By: Anonymous on Mar 19 2015 12:00 AM
Sure. We customer make them per vehicle.
Answer By: Willys Tech on Mar 19 2015 12:00 AM
Questions: I have a 1962 pick up. The previous owner converted it to an alternator system. Unfortunately, a lot of spagetti wiring has been done. Does this have instructions to use an alternator?
Question By: Steve on Oct 9 2014 12:00 AM
You would have to see what alternator someone put on your vehicle currently and wire accordingly.
Answer By: Willys Tech on Oct 10 2014 12:00 AM
Questions: I have a 1956 willys truck. Do you ship to Canada?
Question By: Robert Cook on Aug 5 2014 12:00 AM
Sure. We ship daily UPS and USPS international
Answer By: Willys Tech on Aug 6 2014 12:00 AM
Questions: Will this harness work with both the original 6v and a 12v conversion?
Question By: Steve on Aug 26 2013 12:00 AM
Yes, we custom make these per vehicle.
Answer By: Willys Tech on Aug 26 2013 12:00 AM
Questions: Can the wiring harness be made with additional wire for fender mounted turn signals
Question By: Anonymous on Aug 21 2013 12:00 AM
We probabaly can do something for this yes. Call us toll free.
Answer By: Willys Tech on Aug 21 2013 12:00 AM
Questions: My '57 truck is going to be re-powered,should I get a different harness or will this kit work for any motor combination?
Question By: Anonymous on Sep 11 2012 12:00 AM
These are OEM harnesses so you would have to make some modifications to it.
Answer By: Willys Tech on Sep 12 2012 12:00 AM
Questions: i have a 62 truck will this wire harness come with wire and instructions for changing to alt., elec. ign. etc.
Question By: Anonymous on Jun 17 2012 12:00 AM
Yes it comes with wire for wire instructions. If you get one of our alternators it will come with its own instructions too wire for wire.
Answer By: Willys Tech on Jun 18 2012 12:00 AM
Questions: Is there a color coded wiring illustration available anywhere?
Question By: gil on Oct 29 2011 12:00 AM
They come with the wiring harnesses.
Answer By: Willys Tech on Oct 31 2011 12:00 AM
Questions: I have a 1963 Gladiator. Would this harness work for that truck. If not do you have any Ideal what would work.
Question By: Martin on Jul 31 2011 12:00 AM
No this is for Willys Truck only.
Answer By: Willys Tech on Aug 1 2011 12:00 AM
Questions: Does this kit include the turn signal switch?
Question By: Rick Landau on Mar 25 2011 12:00 AM
Try part number: 947348
Answer By: Willys Tech on Mar 28 2011 12:00 AM
You Might Also Be Interested In
Weekly Willys highlights and discounts sent to your inbox
