Questions & Answers
Questions: You mentioned faxing over a torque diagram to another customer in this Q/A - can that diagram be emailed to me? (dont have a fax machine) - thanks
Question By: Chris on Apr 13 2018 3:56 PM
Please email mike@Kaiserwillys.com and I can help out with this.
Answer By: Willys Jeep Parts Tech on Apr 16 2018 6:00 AM
Questions: I have oil in the antifreeze but not antifreeze in the oil. I'm assuming it is a head gasket but not sure. What is you opinion.
Question By: Charles Williams on Nov 10 2017 6:36 PM
You probably just dont see the oil in your anti freeze. It could be a bad head gasket or cracked block.
Answer By: Willys Jeep Parts Tech on Nov 10 2017 12:04 PM
Questions: Is there a torque tightening pattern? I'm assuming middle out.......??
Question By: Larry on Apr 29 2013 12:00 AM
Yes it works from the center out. Please call us toll free. I can fax over a diagram to you.
Answer By: Willys Tech on Apr 30 2013 12:00 AM
Questions: What kind of sealer should I use on head gasket and studs?
Question By: Donald Simpson on Apr 28 2016 5:50 PM
Any good automotive hi-temp gasket sealer will work.
Answer By: Willys Tech on May 2 2016 5:45 AM
Questions: Which side of this gasket goes towards the head ? Do you recommend any sealer on the gasket surface prior to installation ? Thank You!
Question By: Don on Apr 24 2016 3:24 PM
The metal side goes down. I usually do use a sealer on the studs as well.
Answer By: Willys Tech on Apr 27 2016 9:08 AM