Product Videos
Questions & Answers
Sort By:
Questions: On my 1946 CJ2A, a have an Auto-lite IGW 4189 2C distributer. Does the tune up kit fit it? My points don't seem to be the same model.
Question By: Richard Horth on Nov 11 2020 2:16 AM
See part number: IGW4129
Answer By: Willys Jeep Parts Tech on Nov 11 2020 5:42 AM
Questions: Is this a 6 or 12 volt condenser
Question By: Mike on Oct 3 2019 11:39 AM
They work on both 6 and 12 volt.
Answer By: Willys Jeep Parts Tech on Oct 3 2019 6:16 AM
Questions: Do you have what I believe is a resister. It is mounted on the firewall. The distributor wire is attached to one side and the coil is attached to the other side. I know I need it because without it,it fries the points.
Question By: John Starkey on Jun 23 2019 9:25 PM
Take an image of and email mike@kaiserwillys.com so we can see what all you are working on there.
Answer By: Willys Jeep Parts Tech on Jun 24 2019 5:52 AM
Questions: Where is the distributor ID plate?
Question By: Larry Daniels on Oct 1 2018 8:48 PM
There should be a plate on the distributor itself. Right under the cap. Thanks
Answer By: Willys Jeep Parts Tech on Oct 2 2018 8:39 AM
Questions: What is the diameter of the cap in cm?
Question By: Hafees Mattakompanal on Dec 16 2017 11:13 AM
3-3/8" OD and 3" ID
Answer By: Willys Jeep Parts Tech on Dec 18 2017 6:01 AM
Questions: 1956 Willis Jeep, CJ-3, changing from 6v to 12v. Do I use stock 6v points and condenser?'
Question By: Gaylon Bailey on Jun 22 2017 6:05 PM
The IAD4008 distributor will work on either 6 or 12 volts.
Answer By: Willys Jeep Parts Tech on Jun 22 2017 11:25 AM
Questions: Gap setting for points and spark plugs for '42 Willys Jeep?
Question By: Dan on Dec 18 2014 12:00 AM
They are .020 for both.
Answer By: Willys Tech on Dec 19 2014 12:00 AM
Questions: Are the contact luggs on the Distributor Caps where the wires plug in, made of Aluminum or Brass?
Question By: Grant on Apr 22 2013 12:00 AM
Aluminium
Answer By: Willys Tech on Apr 23 2013 12:00 AM
Questions: i have (restoring a 1951 m38 millitary jeep 24 volt. Has anyone found or used a electronic ignition point set. would like to keep it 24 volt tks bjc
Question By: Anonymous on Apr 12 2013 12:00 AM
I dont believe at this time there is a 24 volt solid state kit available.
Answer By: Willys Tech on Apr 15 2013 12:00 AM
Questions: What is the correct setting for points and plugs for CJ2A ?
Question By: Anonymous on Aug 9 2012 12:00 AM
.020 for both
Answer By: Willys Tech on Aug 10 2012 12:00 AM
Questions: Is this 6 volt?
Question By: John on Jun 26 2012 12:00 AM
They are for either 6 or 12 volt.
Answer By: Willys Tech on Jun 27 2012 12:00 AM
Questions: What is the gap setting for the points?
Question By: Anonymous on Sep 27 2011 12:00 AM
.020
Answer By: Willys Tech on Sep 27 2011 12:00 AM
Questions: I can't find the ID plate on my distributor, on a 1964 cj5. I'm trying to order a tune-up kit. Any advice? John
Question By: John Green on Mar 19 2011 12:00 AM
There should be a metal tag on the distributor. Sometimes they can be hard to see.
Answer By: Willys Tech on Mar 21 2011 12:00 AM
Questions:
Dear , I'm from Chile and I wonder if the distributor kit for CJ2A willys is 12 volts or if the kit is 6 and 12 volts at the same time . ( POINTS , ROTOR , PAC , condenser )
Thank you very much
Question By: Juan Carlos Santander Rojas on May 9 2016 1:14 PM
The distributors work on either voltage.
Answer By: Willys Tech on May 9 2016 10:52 AM
You Might Also Be Interested In
Weekly Willys highlights and discounts sent to your inbox
