Questions & Answers
Questions: The metal bottom seat pans r 4 spring cushions? Don't need pans for plywood bottomed foam cushions? Thanks Rick
Question By: Rick Lane on Jan 11 2021 4:06 AM
If you have a metal pan already then you dont need the plywood pan.
Answer By: Willys Jeep Parts Tech on Jan 11 2021 5:38 AM
Questions: Does this seat have the welded nut in the back tube that mounts it to the wheelhouse?
Question By: Dave on Oct 30 2020 9:52 PM
No, you just need to run a bolt thru if you want to.
Answer By: Willys Jeep Parts Tech on Nov 2 2020 5:35 AM
Questions: I have a '47 CJ2/a. with no drivers seat. Is this seat correct for my Jeep. Your pic shows the front left leg is bent inward. Some other web sites show that left front leg straight down. Just want to know which is the right one?
Question By: Norm Erickson on Oct 25 2020 3:49 AM
I think the picture is just a bit funny. This fits in all CJ-2A's.
Answer By: Willys Jeep Parts Tech on Oct 25 2020 6:34 AM
Questions: I have this seat frame in good shape from my 1946 2a. I also have the springs with the bottom pan, what looks like a horse hair pad and then foam. Is there a cover that will fit over all of this or should I be ordering a replacement foam seat pad and use plywood for the bottom? I'm not hung up on it being original, we still use this jeep for doing real work. I need same for passengers side. Thanks Ben 207 272 5723
Question By: Ben Pearson on Apr 21 2020 7:35 PM
We have alot of options for you. We can make a plywood pan to replace your metal pan, if your metal pan has upholstery hooks then we can do a draw sting style. Please email pics to firstname.lastname@example.org to help.
Answer By: Willys Jeep Parts Tech on Apr 21 2020 1:04 PM
Questions: I have a 1945 CJ-2A. Most parts are reused from left over MB parts. Will this seat fit or do I need a MB seat?
Question By: Charles Lee on Sep 29 2017 9:24 PM
This seat would work for you just fine. You should just make sure you have part number: REARBRKT on your CJ2A as well.
Answer By: Willys Jeep Parts Tech on Oct 2 2017 5:44 AM
Questions: Are the springs for the seats available?
Question By: Elvis Hood on Sep 7 2016 3:19 PM
We do a complete seat cover and cushion set. See our canvas section or call us toll free and we can help you out.
Answer By: Willys Jeep Parts Tech on Sep 7 2016 9:35 AM
Questions: I just purchased a 1946 CJ 2A serial number 27441 and it appears to be all original. The seats in the front have a spring system on them, was this factory or did someone add it?
Question By: Elvis Hood on Sep 6 2016 6:15 PM
The seats did originally have springs in them.
Answer By: Willys Jeep Parts Tech on Sep 6 2016 12:07 PM
Questions: Does the seat mount square behind the steering wheel or is it offset a little?
Question By: Anonymous on Dec 21 2014 12:00 AM
They are offset just a bit like original but it is pretty centered.
Answer By: Willys Tech on Dec 22 2014 12:00 AM
Questions: Does this seat include mounting hardware? If not, what is the part number for hardware? Thanks.
Question By: Dawn on Oct 24 2014 12:00 AM
The hardware to bolt it down is just a HomeDepot item.
Answer By: Willys Tech on Oct 24 2014 12:00 AM
Questions: I have a 47 willies. I am 6 ' 1'' and 295#. The drivers seat is too close to the steering wheel. Do you make a narrow profile seat back that woiuld allow more room for driver. The wheel pan will not allow seat to move back. Or do you make a smaller diameter steering wheel that would give more room for driver?
Question By: Terry Ferguson on Jan 1 1970 12:00 AM
You could possibly modify this frame to fit in there.
Answer By: Willys Tech on Mar 19 2012 12:00 AM
Questions: what are the dimensions?
Question By: Anonymous on May 1 2011 12:00 AM
They are just like the original frames.
Answer By: Willys Tech on May 2 2011 12:00 AM
Questions: Is this seat grey or black?
Question By: Blake Lane on Jan 11 2011 12:00 AM
These are black.
Answer By: Willys Tech on Jan 12 2011 12:00 AM