Save 10% Off Site Wide. Enter PADDY10 Exclusions apply

FREE SHIPPING on all orders $98+ See Details

Select Your Currency
Close
  • Africa
  • Americas
  • Asia
  • Europe
  • Oceania
Shop Kaiser Willys

Exhaust Manifold Heat Riser Repair Kit (Imported)
Fits 41-53 Jeep & Willys with 4-134 L engine

Part # 646089

New Exhaust Manifold Heat Riser Repair Kit

Comes with new shaft, bushings, washer, and coil spring. Acted as an early way of warming up your motor in cold conditions. Opens flap as motor warms.

Application
4-134 L engine

Fits:
41-45 MB
41-45 GPW
46-49 CJ-2A
49-53 CJ-3A
50-52 M38
46-49 Truck
46-49 Station Wagon
48-49 Jeepster

Part # Price
646089

$34.99

MSRP:

$34.99

MSRP:

1 Item has been added to your cart!
Close

Product Videos

Questions & Answers

Please Wait...

Ask Question Add Answer

All questions will be displayed after moderation. All answers will be displayed after moderation.

Hi there what would a shipping quote be to Fraser lake BC. Canada v0j 1s0 be for this?

Willys Jeep Parts Tech:
Please email mike@kaiserwillys.com your full shipping address and we can quote you out. Thanks!

where can i get the flapper that opens and closes?

Willys Jeep Parts Tech:
That is good used only unless you get the whole 801826. Give mike@kaiserwillys.com an email and we can help too.

Will this work for a 58 Chevy 235ci 6 cyl motor?

Willys Jeep Parts Tech:
Sorry, I dont know on that.

I have White discoloring on my exhaust manifold. Thinking it might be an exhaust leak I have been reading some post on the issue And one came up about a heat raiser . My 45 doesn’t have one the hole is closed with a bolt from previous owner. Is this cause if discoloring/ low engine power ?

Willys Jeep Parts Tech:
Please send mike@kaiserwillys.com a picture of what all you have going on and we can look. Thanks!

do you sell the interior flap for the riser, and if you don't, do you know where to buy one?

Willys Jeep Parts Tech:
We can help you with some salvage yards. Please email mike@kaiserwillys.com

Is this part needed? Mine is rusted in the open position. I plan on keeping this jeep in a garage and will likely not drive it in the cold anyway.

Willys Jeep Parts Tech:
When cold starting its recommended to have in the closed position.

What is the size of the calendar?

Willys Jeep Parts Tech:
11 x 8.5

What is the O.D. of the bushings in your kit? I have an Omix ADA kit that would require a 35/64 hole that would be way bigger than the existing one's in the manifold.

Willys Jeep Parts Tech:
5/16 ID 7/16 OD

Do you sell the flap?

Willys Jeep Parts Tech:
We have the 'stop' but the flapper inside is used only.

What is worse case scenario if the heat riser spring is not connected? Attempting to drill out the bolt (it was froze in the manifold) I broke an easy out in the drilled out bolt trying to remove it. Now I can't connect the bracket that holds the spring. I live in the south and don't plan to drive it in cold weather.

Willys Jeep Parts Tech:
I would leave it in the open position and it is ok in warm weather.

Will this fit the 6-226 engine any bright ideas for getting the old sized one out

Willys Jeep Parts Tech:
That would be a used item only for the 6-226 engine. Please call us toll free.

How is the flapper attached to the rod? The one I removed appeared to be welded.

Willys Tech:
Some were welded some were held in with 2 small flat head screws.

I can hear the flapper very loudly in my 46' cj2a. when the motor is running. Does that mean it is broken, or damaged and need to be replaced?

Willys Tech:
It should be spring loaded. Make sure the spring is still there and under tension.

How do you know if the heat riser is working? will you see a physical movement?

Willys Tech:
Yes, it will open the flap up. You will see the counter weight move.

Having problems removing old bushings, do the need to be drilled out or punched out? Any certain way does it all go back?

Willys Tech:
You can typically punch them out.

hj,do thay make a heat riser kit for a 54 226 truck

Willys Tech:
Yes, we can get this good used. Please call us toll free.
Request Catalog
X
THANK YOU! Your catalog request has been submitted successfully. Please note:

If your catalog does not arrive within 7-10 business days, call us Toll-Free at (888) 648-4923.

Email Subscription
X
THANK YOU! You have successfully subscribed to our newsletter.
Contact Form
X
THANK YOU! Your contact form request has been submitted successfully.
Photo Contest
X
SUCCESS! Your photo contest entry has been submitted!
Browser warning
The browser you are using to visit our website is no longer supported. For the best browsing experience, please visit us using a different browser.
I understand, close this message