Questions & Answers
Questions: how do you test for proper draw on the vacumn wipers?
Question By: gene on Apr 5 2022 11:50 PM
A vacuum gauge tester will tell you at the pump.
Answer By: Willys Jeep Parts Tech on Apr 6 2022 7:07 AM
Questions: Hello, I have an M38A1, hurricane engine. Connect the pipe for the vacuum system from the intake to the tee that connects the PCV valve, from there to the vacuum pump that is included under the gasoline pump and then en route to the key on the dash that operates the wiper motors. The motor on the driver's side works fine, but the motor on the passenger's side is slower and even stalls. Interchange the engines and the same thing keeps happening (to verify if any engine failed), I disconnect the vacuum pump from the gasoline pump and improve the speed but the difference between both engines remains. Can you give me an answer to help me fix this bug? Thanks
Question By: Pablo Bressi on Jul 27 2021 10:13 PM
Sounds like you could be generating poor vacuum. I would test what your draw is.
Answer By: Willys Jeep Parts Tech on Jul 28 2021 6:41 AM
Questions: Hello. Do you have any installation diagram of the entire vacuum circuit for an M38A1?
Question By: Pablo Bressi on Jul 27 2021 12:58 PM
Email firstname.lastname@example.org and we can send over.
Answer By: Willys Jeep Parts Tech on Jul 27 2021 10:25 AM
Questions: I have a cj2a 1946 jeep and need two of the vacumn motors (1 for each side). I do not have, core items to give to you. What is this going to cost me to purchase?. I also need the air lines.
Question By: Lou Poulin on Jun 18 2021 9:46 PM
We do have cores available for sale too. Please call us toll free. Happy to help.
Answer By: Willys Jeep Parts Tech on Jun 21 2021 6:05 AM
Questions: I have two to have rebuilt, both from separate 58 CJ5's. My motors are slightly different: They have chrome plated push/pull knob which are only difference between the ones in your pictures. Do you guys support these or am I out of luck? Since they're identical, it makes me believe that these are original/factory units.
Question By: Pete on Dec 25 2020 2:22 PM
Email email@example.com some photos and we will see what we can do. Thanks!
Answer By: WIllys Jeep Parts Tech on Dec 28 2020 6:13 AM
Questions: Do you have these in stock?
Question By: Matthew Brockinton on Apr 30 2020 2:41 PM
We need to rebuild yours. The process takes approx 4 weeks. If you dont have any email firstname.lastname@example.org and we can help. Thanks!
Answer By: Willys Jeep Parts Tech on Apr 30 2020 9:53 AM
Questions: Do you have the wiper units for a 1952 M38 that have the vacuum tube from the pump but then have a vent tube from each unit that goes to the brass T on the air cleaner? The units you show don’t look like those in the M38 manual.
Question By: Gary on Aug 6 2019 9:24 PM
Please email email@example.com we do offer a rebuild service.
Answer By: Willys Jeep Parts Tech on Aug 7 2019 6:40 AM
Questions: I have a 1955 Willy's with a vacuum wiper. Is there a switch for the dash for this?
Question By: Don Boothe on Jul 14 2019 11:01 AM
No, they typically turned on the motor itself.
Answer By: Willys Jeep Parts Tech on Jul 15 2019 5:35 AM
Questions: Are these painted black and have the yellow model number stamped on them like the original ones do? SF 634-1 for a 58 CJ5
Question By: Mickey on Apr 27 2018 3:21 AM
We typically leave these unpainted to let customers paint themselves after rebuilt.
Answer By: Willys Jeep Parts Tech on Apr 27 2018 6:15 AM
Questions: I have a cj3b and I need the pair of windshield wiper vacuum, you have it for sale, and how can I buy it?
Question By: Wesley Totti on Mar 31 2018 11:13 PM
Give us a call toll free at 888.648.4923 and we can go over the options. Thanks
Answer By: Willys Jeep Parts Tech on Apr 1 2018 2:33 PM
Questions: Will this motor replace the ones on a 52 dodge m-37 military truck
Question By: Terrance Croston on Jan 16 2017 2:47 AM
Sorry, I really don't get into Dodge vehicles.
Answer By: Willys Jeep Parts Tech on Jan 16 2017 5:47 AM
Questions: Do you send to Brazil? I need some pieces of Jeep cj3a
Question By: paulo on Aug 8 2014 12:00 AM
Yes we ship daily UPS and USPS international.
Answer By: Willys Tech on Aug 11 2014 12:00 AM
Questions: Will this replace the wiper motor in my 1959 FC-150?
Question By: Maury Bunn on Jul 11 2014 12:00 AM
On that vehicle please send us in your core. We can rebuild it for you.
Answer By: Willys Tech on Jul 14 2014 12:00 AM
Questions: good morning I need the full original wipers quit for CJ 3B, which works with the engine compression. no electrical
Question By: GUSTAVO BERNAL on Jun 15 2014 12:00 AM
Ok, we need your old cores sent into us first and we have rebuilt ones like above.
Answer By: Willys Tech on Jun 16 2014 12:00 AM
Questions: When I lower my windshield, the wiper shaft hits the hood before the windshield rests on the wooden blocks. Any idea why?
Question By: john on Jun 6 2014 12:00 AM
It depends on your vehicle. Later CJ's had footman loops to buffer it. Earlier ones had wood spacer blocks for the spacing.
Answer By: Willys Tech on Jun 9 2014 12:00 AM
I've had the same problem. You could replace the hold off spacers with longer ones so as the wiper motor is further in and the exposed shaft is shorter. Or, what I did, was make new blocks that are tall enough to keep the wiper arm from touching the hood. I made blocks out of 2 x 3, painted black, they look good and work.
Answer By: Carl on Mar 24 2018 4:54 PM
Questions: hello, for MB the wipers motor on the market or the operation is manual.
Question By: pablo artunduaga on Oct 30 2013 12:00 AM
The MB's used manual wiper. Try part number: A11433
Answer By: Willys Tech on Nov 4 2013 12:00 AM
Questions: Is the distance between mounting holes 4 3/4 or 5 3/4 on your 2a rebuilt motor?
Question By: Tim Shaner on Feb 21 2013 12:00 AM
3-5/8 is the mounting to the windshield frame on ALL the vehicles listed above. Just like original.
Answer By: Willys Tech on Feb 21 2013 12:00 AM
Questions: Is there repair kits available for the Trico vacuum motor?
Question By: Max W Jones on May 1 2011 12:00 AM
No we only have the factory rebuld units.
Answer By: Willys Tech on May 2 2011 12:00 AM
Questions: I have a '54 Cj3b without any wipers at all. So I don't have a core to supply. How much is the core charge?
Question By: Bryan Lay on Dec 29 2010 12:00 AM
Please call me toll free. Im more than happy to help out.
Answer By: Willys Tech on Dec 30 2010 12:00 AM