Questions & Answers
Questions: what is the thickness of the steel used in your body and floor repair panels?
Question By: Dave Moomey on Aug 14 2022 10:42 AM
We use OEM thickness. Email mike@Kaiserwillys.com some specific questions and on and we can help.
Answer By: Willys Jeep Parts Tech on Aug 15 2022 5:46 AM
Questions: Does this have the folded lip along the outside edge?
Question By: Cook on Jun 4 2022 3:44 PM
There is a lip on the outside edge to weld to your side panel.
Answer By: Willys Jeep Parts Tech on Jun 7 2022 5:43 AM
Questions: Does the floor pan have the holes/threads for the tunnel cover?
Question By: Brent Herzberger on Aug 25 2019 4:57 PM
Those you will have to drill.
Answer By: Willys Jeep Parts Tech on Aug 26 2019 5:36 AM
Questions: Does this cover under the tool box or from the front face of the tool box
Question By: Gil on Jun 24 2019 12:27 AM
The passenger side floor pan will go under the tool bin area.
Answer By: Willys Jeep Parts Tech on Jun 24 2019 5:48 AM
Questions: Is the old floor cut out and the new panel welded into the open space or does the new panel go over the old floor? I am guessing the old metal is cut out, if so can this be done without removing the tub from the frame? Thank you
Question By: Anonymous on Jan 22 2013 12:00 AM
The M38A1 panels are different from the M38. The ones for the M38A1 are part number: SHTMTL-54L & SHTMTL-54R
Answer By: Willys Tech on Feb 14 2013 12:00 AM
Questions: I was wondering how far the replacement floor pans for a 46 CJ-2a wrap up the center hump? Mine has some cancer about 1 1/2 up the hump and I want to know if this is going to work for it. Also how thick is the sheet metal? Thanks for your help.
Question By: Jeff on Dec 17 2010 12:00 AM
It goes up the hump about 1-1/2. It should work ok. It is orignal gauge thickness.
Answer By: Willys Tech on Dec 19 2010 12:00 AM