Questions & Answers
Questions: I have the 8 leaf on my cj2a and they have no arch anymore, will these help lift it 2- 3 inches? mabe 4"? Thanks John.
Question By: John on Sep 4 2017 12:27 AM
Anytime you replace the original, worn out springs with new ones, they will give you about an 1" - 1-1/2" lift. Thanks!
Answer By: Willys Jeep Parts Tech on Sep 5 2017 11:13 AM
Questions: Are these 1&3/4 wide?
Question By: Bob Appleman on Jan 11 2017 9:59 PM
Yes, that is correct 1-3/4" like original.
Answer By: Willys Jeep Parts Tech on Jan 12 2017 6:01 AM
Questions: I have a 1946 Bantam T3C, I am looking for replacement springs. will these fit? my springs are 10 leaf and 35 eye to eye. If these will not work, do you have any that will fit?
Question By: Brian on Mar 20 2015 12:00 AM
These are 36 eye to eye and I believe the should work for you.
Answer By: Willys Tech on Mar 23 2015 12:00 AM
Questions: My '53 cj3a has 10 leaf springs in the front.I am installing a 3.8 v6 . Can I replace with 8 leafs or stay with 10
Question By: Gary Kirk on Dec 14 2014 12:00 AM
Either will be just fine for you. If it is a V8 I would maybe use the 10 leaf.
Answer By: Willys Tech on Dec 15 2014 12:00 AM
Questions: Are they the same, or is there a left (marked with a L) and a right?
Question By: Leif Arneson on Oct 26 2014 12:00 AM
Front leaf springs are the same for both sides.
Answer By: Willys Tech on Oct 27 2014 12:00 AM
Questions: I am replacing the front leaf spring on a 1945 Willy MB jeep. I'm not sure if an 8 leaf would ride better than a 10 leaf. Which one would you suggest that I order?
Question By: Bonnie Har on Jun 28 2013 12:00 AM
We sell alot of both. I usually put part number: A612
Answer By: Willys Tech on Jun 28 2013 12:00 AM
Questions: I have a 1953 CJ3A with 10 leaf front springs that need replacing. Does the 8 leaf have a smoother ride than the 10 leaf? What is the advantage on one over the other?
Question By: Anonymous on Feb 15 2013 12:00 AM
Really either is pretty good. If you are towing go with 10 leaf. If not I usually stick with 8 leaf. They both sit at the same ride height.
Answer By: Willys Tech on Feb 18 2013 12:00 AM
Questions: What is the part number for leaf spring tie bolts? Are they the same for front and back?
Question By: Danny on Dec 18 2012 12:00 AM
I think you are referring to the bolt that goes thru the center of the packs to hold the assembly together. That is just a local hardware store item. Make sure to get hardened.
Answer By: Willys Tech on Dec 19 2012 12:00 AM
Questions: What is the difference in the of 8 or 10 leaf spring thanks
Question By: jose reynoso on Sep 21 2012 12:00 AM
Just the leaf count. The arch is the same. They both fit.
Answer By: Willys Tech on Sep 21 2012 12:00 AM
Questions: Do you carry the rubber bushings that go inside the eyes of leaf springs for the MB?
Question By: christopher on Apr 13 2012 12:00 AM
They didnt use rubber bushings in the shackles on a MB, only rubber grease retainers. They come complete in our shackle kits part numbers: 802061 & 802062
Answer By: Willys Tech on Apr 16 2012 12:00 AM
Questions: I have a 42MB need new springs all the way around but would like to get two more inches of clearness for a little taller tire any suggestions?
Question By: JD Witzel on Jan 3 2012 12:00 AM
You should get appox 1-2 inches of extra height from these from where you are sitting now. Your old leaf springs loose their arch so these set you back up to stock height.
Answer By: Willys Tech on Jan 4 2012 12:00 AM
Questions: ihave a 48 cj2a and how high will a 10spring lift it from stock? is there any size bigger to put on?
Question By: JASON on Aug 25 2011 12:00 AM
These set you back up at stock height.
Answer By: Willys Tech on Aug 26 2011 12:00 AM
Questions: will the brass bushing come with spring or do i need to order sep.
Question By: pee wee on Jul 15 2011 12:00 AM
The bushings are separate.
Answer By: Willys Tech on Jul 15 2011 12:00 AM
Questions: Do the 10leaf springs come with the bushings?
Question By: Fred Galbraith on Apr 5 2011 12:00 AM
This is for the leaf spring only. We sell the bushings, bolts, and shackles as well. Part numbers: 359039, 384228, 802061 & 802062.
Answer By: Willys Tech on Apr 6 2011 12:00 AM
Questions: just wondering if its 124.99 for one spring or for two springs? i only ask because i need all four.
Question By: Anonymous on Mar 13 2011 12:00 AM
These are each. You will need quantity 2 part number: 926709 for the front.
Answer By: Willys Tech on Mar 14 2011 12:00 AM
Questions: how wide is this 10 leaf leaf spring? is it 1 3/4?
Question By: chris on Mar 9 2011 12:00 AM
Yes, they are 1-34 wide. Just like original.
Answer By: Willys Tech on Mar 9 2011 12:00 AM
Questions: I have a 1942 Ford Jeep,, I need a front spring, but should it be 8 leaf or 10 leaf, what models/years/etc defines which one it should be please?
Question By: Terry on Mar 3 2011 12:00 AM
You would want to go with the 8 leaf is what I prefer part number: A612 But these 10 leaf work fine as well.
Answer By: Willys Tech on Mar 4 2011 12:00 AM
Questions: Have a 1962 CJ3B....should I put 8 or 10 leaf on the front, and what should I put on the rear..???
Question By: steve on Feb 22 2011 12:00 AM
Either will work fine. The rear takes a 9 leaf only. Its part number: A614
Answer By: Willys Tech on Feb 22 2011 12:00 AM
Questions: I have a 1948 CJ 2A, I need front Leaf Springs on both sides. They have 10 leafs. 363/4, by 1 3/4. Should I replaced the shocks at the same time?
Question By: Larry Chretien on Apr 21 2016 10:38 PM
These are the correct leaf springs. I typically would do the shocks if you can, as well as the U-bolts too.
Answer By: Willys Tech on Apr 27 2016 9:14 AM