Product Videos
Build Your Willys: MB/GPW Shackle Bracket Installation
Build Your Willys: MB/GPW - Shock Installation
Questions & Answers
Sort By:
Questions: will these work with the added weight of a v8 conversion
Question By: howard trees on May 28 2022 12:21 PM
Yes, that is correct.
Answer By: Willys Jeep Parts Tech on May 31 2022 7:23 AM
Questions: I have a 54 PU 4WD and need new forward leaf springs. With only about 46K miles, I am assuming these are original. Can I get the exact 12 leaf replacement? I only see 11.
Question By: Andrew Swick on Nov 30 2020 10:58 PM
They are only available in a 10 count and will set you back up to stock height.
Answer By: Willys Jeep Parts Tech on Dec 1 2020 5:31 AM
Questions: What is the correct arc for front and rear leaf springs for a 57 pick up with a 226 engine?
Question By: Brian on Nov 4 2020 11:53 PM
926709A and 919692
Answer By: Willys Jeep Parts Tech on Nov 5 2020 5:40 AM
Questions: Will these leafs work in a 52 Willys pickup, swapping in a Dana 44 from a Gladiator?
Question By: Eric Schwartz on Apr 22 2017 1:45 PM
I have not tried to do that before but I don't see any issues with it.
Answer By: Willys Jeep Parts Tech on Apr 24 2017 5:46 AM
Questions: do you make these in a lifted spring? im doing something totally different for my 37 plymouth pickup and these springs are the same eye to eye ect but want something with a lift.
Question By: CHRIS CHYTKA on Mar 10 2017 2:29 AM
Sorry these are not available in a lift kit.
Answer By: Willys Jeep Parts Tech on Mar 10 2017 5:42 AM
Questions: HI we are putting new springs in a , FJ-3 FLEETVAN. Would the 10 leaf 926709A be OK for the front and the 11 leaf for the rear?
Question By: RICHARD COUNTS on Feb 24 2017 11:41 PM
Please call us toll free. We can confirm some measurements with you.
Answer By: Willys Jeep Parts Tech on Feb 27 2017 5:42 AM
Questions: I'm starting into a 61 overland, total restore project. I would like to see the truck set as level front to back as possible. I'm going to order a new set of front leafs to start. Do yous offer anything else to help lift it a little more if needed. I don't want it to set hgh just as close to level as possible. Thanks Jeff
Question By: Jeff Burlingame on Dec 9 2016 12:02 AM
Our leaf spring assemblies will typically get you approx. 1" of raise from where you are at now because the old leaf springs have lost their arch. It will set you back up to stock height.
Answer By: Willys Jeep Parts Tech on Dec 9 2016 5:59 AM
Questions: I have a late 60's willys pickup. The front leaf springs have 11 leaves. I'm assuming the 10 leaf is the replacement? Thanks.
Question By: John J Riley IV on Nov 8 2016 12:57 PM
Yes, this is a proper replacement for the front on your Willys Truck.
Answer By: Willys Jeep Parts Tech on Nov 8 2016 5:38 AM
Questions: My mechanic says my 59 truck is 47" from bolt to bolt. you product is 36". whos right? HELP
Question By: john frerman on Jul 22 2016 7:37 PM
Call us toll free and we can see what is going on with your vehicle and help you get the parts you need.
Answer By: Willys Jeep parts tech on Jul 25 2016 5:50 AM
Questions: My '57 4wd truck springs are in good condition however one of the retainer clamps (bands) on the spring assembly rotted and broke. Do you have replacements?
Question By: Scott on May 1 2014 12:00 AM
That you will have to make locally.
Answer By: Willys Tech on May 2 2014 12:00 AM
Questions: I'm getting ready to order new springs and shocks for my 1950 2wd truck. Do the springs come with the pivot eye bushing? Will I need to replace anything else?
Question By: Al on Aug 10 2012 12:00 AM
The leaf springs are less the bushings. We do sell those as well. Please call us toll free.
Answer By: Willys Tech on Aug 10 2012 12:00 AM
Questions: I have a 55 pickup and have a chrysler 440 big block and TF727 automatic going in it. How well do you think these would hold up the front of the Jeep? A little bit of sage is ok. Because its a rat rod project, its going to have a little rake to it. Or what recomendations do you have for me?
Question By: Tim on Jul 20 2012 12:00 AM
These are heavy duty and will work perfect.
Answer By: Willys Tech on Jul 20 2012 12:00 AM
Questions: does this come with one set of leaf springs or two?
Question By: pike on Dec 30 2011 12:00 AM
This is for one side only.
Answer By: Willys Tech on Jan 2 2012 12:00 AM
Questions: These are suggested as the stock replacement in a 10 spring or an 8 spring pack. Does the 10 spring offer a little lift or is the stock height retained? Thanks--Les
Question By: Les on Dec 20 2010 12:00 AM
Yes, they will both set you up to stock height.
Answer By: Willys Tech on Dec 24 2010 12:00 AM
Questions: good morning, looking over the 10 leaf springs for the front of my willys. Whats the difference between the 926709 and the 926709A ? thanks, Mike
Question By: mike moore on May 2 2016 1:17 PM
They are the same part. They are an interchange for listing purposes.
Answer By: Willys Tech on May 2 2016 11:57 AM
You Might Also Be Interested In
Weekly Willys highlights and discounts sent to your inbox
