Product Videos
Questions & Answers
Sort By:
Questions: I need the bushings for the front eye of the front leaf springs of my 1953 4wd pickup, will this work?
Question By: Joseph Huld on Feb 19 2020 1:13 AM
If you are working on the pivot eye end of the leaf spring then its this one. If your working on the shackle end of the front leaf spring its the 802061 or 802062 in that year. Later Trucks used the 916646 shackle.
Answer By: Willys Jeep Parts Tech on Feb 19 2020 5:56 AM
Questions: I know that this bushing goes with the greaseable bolt #384228A.
But how do I know if I need this combo or the non-greaseable combo of #921055B/809236B?
I have a 62 wagon with a dana 25.
Question By: David on Aug 21 2019 5:05 PM
The Willys Station Wagon would be greasable only on your pivot eyes.
Answer By: Willys Jeep Parts Tech on Aug 21 2019 10:17 AM
Questions: I see in answer below two of Bushing Dimensions are;
ID .56 x OD .75 -inches what is the length?
Looking for 9/16 x 3/4 x 1-3/4 inch Bushing, Need 6-each.
Thanks.
Question By: Bill on Aug 30 2018 1:00 AM
1-5/8"
Answer By: Willys Jeep Parts Tech on Aug 30 2018 5:36 AM
Questions: Do you have these bushings for 1947 2wd station wagon with only one leaf spring from side to side?
Question By: Anonymous on May 21 2013 12:00 AM
The front bushings for the planar suspension 2x4 Willys Station Wagon and Jeepster is part number: 646081
Answer By: Willys Tech on May 22 2013 12:00 AM
Questions: I have a 59 4wd wagon and I need to know what bushing goes in the front end rear shackle I know the brass bushing is in the front but it looks like a rubber bushing is on the rear.
Question By: David on May 21 2013 12:00 AM
You are looking for part number: 804466 for the rear on the Willys Station wagon.
Answer By: Willys Tech on May 21 2013 12:00 AM
Questions: Will these work on 2wd?
Question By: Anonymous on Jun 23 2012 12:00 AM
2WD Willys Trucks and Station Wagons used different set up. This is for 4WD only.
Answer By: Willys Tech on Jun 25 2012 12:00 AM
Questions: How many will I need to do both springs on the front?
Question By: Raun Mawson on Feb 28 2012 12:00 AM
Quantity of 2
Answer By: Willys Tech on Feb 28 2012 12:00 AM
Questions: What is the OD and ID measurements, I need the pressed in bushing that goes into the shackle on a FC 170
Question By: GW on Dec 13 2011 12:00 AM
Approx .75 OD x .56 ID just like original.
Answer By: Willys Tech on Dec 15 2011 12:00 AM
You Might Also Be Interested In
Weekly Willys highlights and discounts sent to your inbox
