Questions & Answers
Questions: What is the bolt spacing on the motor mounts? I have some but they don't match the holes. Also, is the passenger side hole at an angle or straight accross 1949 jeep truck L134
Question By: Larry Hunter on Apr 11 2022 10:08 PM
Straight across. Sounds like someone has changed something on your Truck. Email firstname.lastname@example.org some photos and we can help.
Answer By: Willys Jeep Parts Tech on Apr 12 2022 5:34 AM
Questions: Putting the engine and transmission into the frame of my 3B and I cannot get all the mounts to line up. When the motor mounts are lined up the tailshaft of the transmission is almost an inch to the passenger side off of the transmission mount. The trans mount plate only goes on one way (the turned down lip to the front). Is there a trick or something to getting the mounts to line up or is the frame potentially bent? Any ideas?
Question By: Steve Brown on Nov 21 2019 2:32 AM
You may be missing the original spacer plate between the transmission and cross member or possibly have the wrong front engine mounting plate on there. Email email@example.com and we can try to help you.
Answer By: Willys Jeep Parts Tech on Nov 21 2019 6:28 AM
Questions: I bought a 51 cj3a last week. The previous owner began installing a 4 cyl 134f engine in it. It has no motor mounts or brackets to attach them to. He did a 3" body lift to accommodate the taller motor. What do I need to finish the engine install?? Everything else is bolted up and ready to go. Motor is hooked up to tranny. Engine is just resting on the skid plate. Do I use the same radiator? Anything else to watch out for??
Question By: Jason A. Enlow on Aug 1 2018 3:04 PM
Call me toll free. Ask for Mike M. I can see all what you have and dont have and can help you with whats missing. Thanks!
Answer By: Willys Jeep Parts Tech on Aug 1 2018 12:16 PM
Questions: Do you have the brackets that are riveted to the frame (drivers side) that this motor mounts mount to? Mine is badly damaged.?
Question By: Anonymous on Mar 14 2012 12:00 AM
We can maybe get you some good used ones cut. Please call us toll free.
Answer By: Willys Tech on Mar 15 2012 12:00 AM
Questions: Do these insulators mount directly to the frame or do they fit into some kind of metal mounting bracket?
Question By: Chris on Apr 5 2011 12:00 AM
There are brackets that are welded/riveted to the frame that they mount on.
Answer By: Willys Tech on Apr 6 2011 12:00 AM