Questions & Answers
Questions: i ordered 921055 spring bushing the id was 7/16 i need 9/16 id do not see any i could get from you can you help me out . thank you
Question By: jeff c gage on Oct 24 2020 7:03 PM
We need to get more vehicle information and see what you really need. Please email firstname.lastname@example.org
Answer By: Willys Jeep Parts Tech on Oct 25 2020 6:33 AM
Questions: Will these fit a 1947 Bantam t3-c trailer?
Question By: Dean on Feb 21 2020 8:43 PM
Yes, if your takes the 384228 style greaseable pivot eye bolt.
Answer By: Willys Jeep Parts Tech on Feb 24 2020 9:51 AM
Questions: Is the right one for my m38
Question By: cliff on Mar 15 2019 4:44 PM
These are a bit different on the OD for the M38
Answer By: Willys Jeep Parts Tech on Mar 15 2019 10:29 AM
Questions: What was originally used at the opposite end of each leaf spring, meaning the front of the front springs and the rear of the rear springs?
Question By: Temio on Jan 9 2019 9:18 PM
Typically you have the 802061 and 802062 shackles and the 359039 and 384228 pivot eye bolt and bronze bushing.
Answer By: Willys Jeep Parts Tech on Jan 10 2019 5:56 AM
Questions: What's the length of these bushings?
Question By: Jason Renshaw on Aug 26 2018 10:53 PM
Answer By: Willys Jeep Parts Tech on Aug 27 2018 5:54 AM
Questions: What is the OD of the bushing?
Question By: Frank on Mar 18 2018 7:31 PM
The OD is 3/4" and the ID is 1/2" - Thanks
Answer By: Willys Jeep Parts Tech on Mar 19 2018 11:48 AM
Questions: Do you use the same bushing on the front and rear of leaf spring
Question By: Terry White on May 1 2017 2:12 PM
Each leaf spring assembly takes one.
Answer By: Willys Jeep Parts Tech on May 1 2017 9:45 AM
Questions: I have a '53 cj3a.What do I need to convert to the cj5 type shackles from the c type
Question By: Gary on Dec 20 2014 12:00 AM
That will be tough. Really there is no advantage to switching over. I would stick with the C-shackles.
Answer By: Willys Tech on Dec 22 2014 12:00 AM
Questions: I have a 51 cj3a do I need a rubber grommet along with this bushing or does the brass bushing just slide in to the leaf spring thanks for your time
Question By: Anonymous on Oct 6 2014 12:00 AM
They never used rubber grommets in a CJ-3A. This brass bushing just slides in on the pivot eye end.
Answer By: Willys Tech on Oct 7 2014 12:00 AM
Questions: I have a 1949 CJ3A, putting on new springs in front. Stupid question, does the bronze bushing go to the front of the jeep (shackel end) or to the rear (pivot eye bolt end).
Question By: Phil on Mar 26 2014 12:00 AM
The bushing is the rear of the front leaf springs for the pivot eye end. It is the front of the rear leaf springs for the pivot eye end.
Answer By: Willys Tech on Mar 26 2014 12:00 AM